For Use On For Use On |
---|
For Joining For Joining |
---|
Type Type |
---|
|
Formulation Formulation |
---|
|
|
Adhesive Type Adhesive Type |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Manufacturer Manufacturer |
---|
|
|
Container Size Container Size |
---|
|
|
Hardness Rating Hardness Rating |
---|
|
More
More
Pull off a small piece of putty and stick lightweight objects to your surface. It removes without leaving stains or residue on most surfaces and is reusable.
Container | |||||||
---|---|---|---|---|---|---|---|
Size, oz. | Type | Consistency | Temp. Range, °F | Color | For Joining | Each | |
1 | Strip | Putty | 70° to 100° | Blue | Ceramic, Glass, Masonry, Metal, Wood | 000000 | 00000 |
This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Temp. Range, °F | Color | For Joining | Pkg. Qty. | Pkg. | |
0.17 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -55° to 355° | Black | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 000000 |
0.17 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -55° to 355° | Blue, Red, Yellow | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 00000 |
0.17 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -55° to 355° | Gray | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 00000 |
0.17 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -55° to 355° | White | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 00000 |
Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.
The size listed is the combined total of the two parts. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.
WaterWeld and 11800, as well as one-time-use packets, can be applied to wet surfaces or under water.
Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
WaterWeld | 8277 | 2 | Stick | 25 min. | 60 min. | 900 | Not Rated | Putty (Not Rated) | Not Rated to 300° | Off-White | Salt Spray, Submersible | Metal, Plastic, Rubber, Composites | 0000000 | 00000 |
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
11800 | 16 | Pail | 45 min. | 24 hrs. | 2,600 | 1:1 | Putty | 40° to 250° | Gray | Submersible | Metal, Plastic, Composites | 0000000 | 000000 |
Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.
Butyl rubber has a sticky, gummy consistency.
Butyl mastic has a clay-like consistency.
Black | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Wd. | Thick. | Lg., ft. | Tensile Strength | Hardness | Temp. Range, °F | For Joining | Number of Pieces | Each | |
08578 | 5/16" | 5/16" | 1 | Not Rated | Not Rated | -20° to 200° | Metal Plastic Asphalt Composites Glass Masonry Wood | 60 | 0000000 | 000000 |
5354 | 1/4" | 1/8" | 50 | Not Rated | Medium Hard (Durometer 60A) | -50° to 190° | Metal Metal to Plastic Metal to Glass Plastic Plastic to Glass Glass Wood Wood to Glass | 1 | 0000000 | 00000 |
5354 | 1/4" | 1/4" | 25 | Not Rated | Medium Hard (Durometer 60A) | -50° to 190° | Metal Metal to Plastic Metal to Glass Plastic Plastic to Glass Glass Wood Wood to Glass | 1 | 00000000 | 00000 |
5354 | 3/8" | 1/8" | 50 | Not Rated | Medium Hard (Durometer 60A) | -50° to 190° | Metal Metal to Plastic Metal to Glass Plastic Plastic to Glass Glass Wood Wood to Glass | 1 | 0000000 | 00000 |
5354 | 3/4" | 1/8" | 50 | Not Rated | Medium Hard (Durometer 60A) | -50° to 190° | Metal Metal to Plastic Metal to Glass Plastic Plastic to Glass Glass Wood Wood to Glass | 1 | 0000000 | 00000 |
Dia. | Lg., ft. | Tensile Strength | Hardness | Temp. Range, °F | For Joining | Number of Pieces | Each | |
Brown | ||||||||
---|---|---|---|---|---|---|---|---|
3/16" | 45 | Not Rated | Not Rated | -30° to 150° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | 8 | 00000000 | 00000 |
3/16" | 90 | Not Rated | Not Rated | -30° to 150° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | 8 | 00000000 | 0000 |
Gray | ||||||||
3/16" | 30 | Not Rated | Not Rated | -30° to 150° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | 8 | 00000000 | 0000 |
3/16" | 45 | Not Rated | Not Rated | -30° to 150° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | 8 | 0000000 | 0000 |
3/16" | 90 | Not Rated | Not Rated | -30° to 150° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | 8 | 0000000 | 0000 |
Press this adhesive-backed plastic tape into place for an immediate light-duty seal. It has a score line for easy installation in a corner.
Wd. | Thick. | Lg., ft. | Reaches Full Strength | Tensile Strength | Hardness | Temp. Range, °F | For Joining | Color | Each | |
PET Plastic with Butyl Rubber Adhesive | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
7/8" | 1/4" | 11 | 12 hrs. | Not Rated | Not Rated | 55° to 80° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | White | 0000000 | 00000 |
Press this pliable rope into place to hold glass in window frames and seal leaks. It’s also known as glazing compound. The rope is non-sagging, so it won't drip from vertical and overhead surfaces. It’s good for use between dissimilar materials and in environments with wide temperature fluctuation. Remove the peel-off liner to install.
Dia. | Lg., ft. | Tensile Strength, psi | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Color | Each | |
Butyl Rubber | |||||||||
---|---|---|---|---|---|---|---|---|---|
1/4" | 20 | 30 | Soft (Durometer 15A) | 40° to 120° | -70° to 220° | Metal Metal to Glass Glass Wood Wood to Glass | Gray | 0000000 | 000000 |
Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing. They’re non-sagging, so they won't drip from vertical and overhead surfaces. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation. They must be painted after hardening to stand up to UV light. For sealants that require primer for use on wood, use any oil-based wood primer.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Tensile Strength | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Primer Required For Use On | Color | Each | |
Calcium Carbonate | ||||||||||||
10.1 oz. | Cartridge | 6 hrs. | 72 hrs. | Not Rated | Medium Hard (Durometer 60A) | 40° to 90° | 0° to 180° | Metal Metal to Glass Glass Wood Wood to Glass | __ | White | 0000000 | 00000 |
16 oz. | Can | 7 days | 4 mo. | Not Rated | Not Rated | 40° to 90° | -20° to 160° | Metal Metal to Glass Glass Wood Wood to Glass | Wood | White | 0000000 | 0000 |
32 oz. | Can | 48 hrs. | 21 days | Not Rated | Not Rated | 40° to 90° | 0° to 180° | Metal Metal to Glass Glass Wood Wood to Glass | __ | White | 0000000 | 0000 |
1 gal. | Can | 7 days | 4 mo. | Not Rated | Not Rated | 40° to 90° | -20° to 160° | Metal Metal to Glass Glass Wood Wood to Glass | Wood | White | 0000000 | 00000 |
5 gal. | Pail | 48 hrs. | __ | Not Rated | Not Rated | 40° to 110° | -10° to 120° | Metal Metal to Glass Glass Wood Wood to Glass | __ | White | 0000000 | 000000 |
These sealants don't degrade in sunlight. Also known as glazing compounds, use these sealants to install glass in framing. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, these sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | Specifications Met | For Joining | Choose a Color | Each | |
Dow Corning Silicone | |||||||||||||
791 | 10.3 | Cartridge | 15 min. | 14 days | Not Rated | -50% to 50% | Soft (Durometer 34A) | -55° to 300° | ASTM C920 Type S Grade NS Class 50 | Metal Metal to Glass | Gray | 0000000 | 00000 |
999A | 10.3 | Cartridge | 10 min. | 14 days | Not Rated | -25% to 25% | Soft (Durometer 25A) | -75° to 350° | __ | Metal Metal to Glass | Clear | 0000000 | 0000 |
Sika Sikaflex Silicone | |||||||||||||
295 | 10.1 | Cartridge | 60 min. | 72 hrs. | 700% | -50% to 50% | Soft (Durometer 25A) | -40° to 190° | __ | Plastic Plastic to Glass Rubber Rubber to Glass | 000000 | 00000 | |
Silicone | |||||||||||||
__ | 10.1 | Cartridge | 30 min. | 24 hrs. | 475% | -25% to 25% | Soft (Durometer 20A) | -75° to 400° | FDA Compliant 21 CFR 175.105, FDA Compliant 21 CFR 177.2600, Fed. Spec. TT-S-001543A Type II Class A, Fed. Spec. TT-S-00230C Type II Class A, NSF/ANSI 51 | Metal Metal to Glass Plastic Plastic to Glass Rubber Rubber to Glass Composites Composites to Glass Glass Masonry Wood Wood to Glass | 0000000 | 0000 |
Seal glass windows in metal and wood fire-rated doors. Also known as glazing tape, it has an adhesive back with a peel-off liner.
Fire Safety | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Rating, min. | Standard | Wd. | Lg., ft. | Tensile Strength, psi | Hardness | Application Temp. Range, °F | Max. Temp., °F | For Joining | Color | Each | |
Aluminum | |||||||||||
3/64" Thick. | |||||||||||
45 | UL 10C | 7/16" | 8 | 230 | Not Rated | 10° to 155° | 1800° | Metal Metal to Glass Glass Wood | White | 0000000 | 000000 |
45 | UL 10C | 7/16" | 14 | 230 | Not Rated | 10° to 155° | 1800° | Metal Metal to Glass Glass Wood | White | 0000000 | 00000 |
5/64" Thick. | |||||||||||
90 | UL 10C | 7/16" | 16 | 230 | Not Rated | 10° to 155° | 1800° | Metal Metal to Glass Glass | White | 000000000 | 00000 |
Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.
Devcon Flexane 80 Putty can be used with vinyl plastic and rubber.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Flexane 80 Putty | |||||||||||||
15820 | 1 lbs. | Can | 20 min. | 7 days | Putty | 2.6:1 | 90 sq. in. @ 1/4" | -40° to 180° | Black | Sand | Vinyl Plastic, EPDM Rubber, SBR Rubber | 00000000 | 000000 |
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
Devcon Plastic Steel surface fillers can repair areas where brazing and welding is impractical.
NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Specifications Met | Finishing Method | For Use On | Each | |
Devcon Plastic Steel® Putty | ||||||||||||||
10110 | 1 lbs. | Jar, Can | 45 | 16 | Putty | 9:1 | 40 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
10120 | 4 lbs. | Jar, Can | 45 | 16 | Putty | 9:1 | 190 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
10130 | 25 lbs. | Pail, Can | 45 | 16 | Putty | 9:1 | 1200 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
Devcon Plastic Steel® 5 Minute Putty | ||||||||||||||
10240 | 1 lbs. | Jar, Can | 5 | 16 | Putty | 1.7:1 | 40 sq. in. @ 1/4" | -40° to 200° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 00000 |
Devcon Stainless Steel Putty | ||||||||||||||
10270 | 1 lbs. | Jar, Can | 60 | 16 | Putty | 11:1 | 50 sq. in. @ 1/4" | -40° to 250° | Dark Gray | NSF/ANSI 61 | Machine, Drill, Sand, Saw, Tap | Stainless Steel | 00000000 | 000000 |
Devcon FasMetal™ Putty | ||||||||||||||
10780 | 0.75 lbs. | Jar, Can | 4 | 16 | Putty | 1:1 | 60 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 00000000 | 000000 |