Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

Even when used under water, these adhesives maintain their strength.

These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.

These self-extinguishing epoxies meet UL 94 V-0 for flame retardance.

No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.

Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.

To keep these adhesives from squeezing out during clamping and give a consistent bond thickness, they're mixed with small glass beads.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene.

Accommodate joint movement with these adhesives that remain pliable when cured.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

These adhesives withstand temperatures of 390° F or more.

Form bonds without the strong odor of other instant-bond adhesives.

Bond plastics, porous materials, or dirty surfaces.

These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.

These thin liquids, also known as super glue, flow into small gaps.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

For easy positioning, these adhesives begin to harden only when exposed to light.

Invisibly bond glass and transparent plastics.

Form bonds with twice the strength of our other spray adhesives.

Spray a coating of this glue onto one surface to temporarily hold small parts.

These adhesives resist temperatures up to 500° F.

The 3M VHB adhesive on these rolls offers a strong hold that can replace rivets, spot welds, and other permanent fasteners.

Also known as Gorilla Glue, this glue expands to form stronger bonds than other glue.

Temporarily stabilize objects on flat surfaces with this clear, reusable adhesive.

This glue withstands temperatures up to 500° F.

These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.

Tack wires to coil forms or secure and insulate hardware on printed circuit boards. These adhesives require an accelerator.

The polyurethane glue in these cartridges has nearly twice the shear strength of other hot-melt adhesives.

Withstand demanding, high-vibration applications such as motor and pump housings with these threadlockers.

Keep threaded fasteners from loosening at temperatures up to 450° F.

Secure threaded fasteners at temperature extremes—from -300° F to 2100° F.

These threadlockers meet NSF/ANSI 61 for drinking water.

This thick paste withstands temperatures up to 650 °F.

Apply these threadlockers on fasteners that are already installed—their thin consistency allows them to flow into small gaps.

Use these threadlockers for threaded fasteners that require occasional fine-tuning, such as set screws.

Wrap this no-mess tape around threaded fasteners up to 30 days before installation.

To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.

Even on oily surfaces, these retaining compounds keep their hold.

Even on oily surfaces, these retaining compounds keep their hold.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Make temporary waterproof seals that peel off when no longer needed.

Press this adhesive-backed plastic tape into place for an immediate light-duty seal.

The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as Torr Seal, this sealant forms a rigid bond that seals leaks on vacuum systems or components.

Formulated to flow into small spaces, use these sealants between fine threads.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

Apply this thread sealant stick without a mess.

Apply these thread sealant sticks without a mess.

Remaining pliable over time, these high-temperature sealants protect against leaks caused by vibration and pressure—they naturally fill voids before leaks can develop.

Completely free of oil and chemically inert, these sealants are safe to use with wet and dry oxygen systems.

This tape has a higher density than standard tape for a better seal between threads.

Wind this multifilament cord into the grooves of tapered pipe threads to quickly create a seal.

Repair equipment and vehicle windows with these sealants that are rated to withstand impact within three hours of application.

Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.

Seal glass windows in metal and wood fire-rated doors.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

The textured finish matches concrete surfaces.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.