Adhesives for Use On Leather

Clear All

	Container Type Container Type


Aerosol Can	Bottle

Brush-Top Bottle	Can

Cartridge	Jug

Single-Use Packet	Spray Bottle

Syringe	Tube

	For Use On For Use On	Show

Leather

	For Use On For Use On	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

3D Printer Extruder
Heating Elements

Electrical Components

Polycarbonate Plastic

Polyethylene

Polyethylene Plastic

Polyimide Plastic

Polypropylene Plastic

Vinyl Coated Material

Viton® Fluoroelastomer
Rubber

Wood

	For Joining For Joining

	Color Color

	Clear		White
	Gray		Black
	Blue		Beige
	Red		Purple
	Yellow		Brown
	Orange

	Manufacturer Model Number Manufacturer Model Number

	Manufacturer Manufacturer

Loctite®

Permabond

	Type Type

Adhesive

Primer

Surface Filler

	Begins to Harden Begins to Harden

	Adhesive Type Adhesive Type

	Clarity Clarity

Clear

Semi-Clear

Opaque

	Container Size Container Size

	Consistency Consistency

	Reaches Full Strength Reaches Full Strength

	Formulation Formulation

	Shear Strength Shear Strength

	Mixing Required Mixing Required

Yes

	Cure Type Cure Type

Room Temperature

	Approximate Coverage Approximate Coverage

21 sq. ft. @ 2.5 gm/ft²

26 sq. ft. @ 2.5 gm/ft²

28 sq. ft. @ 2.5 gm/ft²

29 sq. ft. @ 2.5 gm/ft²

720 sq. ft.

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	Maximum Temperature Maximum Temperature

Less than 500° F

	Minimum Temperature Minimum Temperature

-74° to -50° F

-49° to 0° F

Greater than 0° F

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

37 Products

About Structural Adhesives

Also known as super glue, these adhesives bond quickly. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

240 works especially well on porous materials.

	Container
Mfr. Model No.	Size, fl. oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
4011	0.7	Bottle	0.005"	15 sec.	24 hrs.	Thin Liquid (120 cP)	-65° to 180°	Clear	Cardboard, Fabric, Metal, Plastic, Rubber, Wood	000000	000000
4471	0.7	Bottle	0.008"	15 sec.	24 hrs.	Thin Liquid (630 cP)	-65° to 180°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
4471	16	Bottle	0.008"	15 sec.	24 hrs.	Thin Liquid (630 cP)	-65° to 180°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000
Permabond Adhesives
240	1	Bottle	0.017"	15 sec.	24 hrs.	Thick Liquid (1,850 cP)	-65° to 180°	Clear	Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood	0000000	00000

Toughened Instant-Bond Adhesives

Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

435 and 438 work on porous materials such as wood, paper, and fabric.

	Container
Mfr. Model No.	Size, fl. oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
435	0.7	Bottle	0.006"	30 sec.	24 hrs.	Thin Liquid (180 cP)	-65° to 220°	Clear	Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood	00000000	000000
435	16	Bottle	0.006"	30 sec.	24 hrs.	Thin Liquid (180 cP)	-65° to 220°	Clear	Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood	00000000	000000
438	0.7	Bottle	0.006"	30 sec.	24 hrs.	Thin Liquid (180 cP)	-65° to 220°	Black	Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood	00000000	00000

Low-Odor Instant-Bond Adhesives

Form bonds without the strong odor of other instant-bond adhesives. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

403 and 460 work especially well on porous materials such as wood, paper, and fabric.

	Container
Mfr. Model No.	Size, fl. oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
403	0.7	Bottle	0.008"	50 sec.	24 hrs.	Thick Liquid (1,380 cP)	-65° to 200°	Clear	Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood	00000000	000000
460	0.7	Bottle	0.004"	50 sec.	24 hrs.	Thin Liquid (40 cP)	-65° to 200°	Clear	Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood	00000000	00000
460	16	Bottle	0.004"	50 sec.	24 hrs.	Thin Liquid (40 cP)	-65° to 200°	Clear	Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood	00000000	000000

Instant-Bond Adhesive Gel for Hard-to-Bond Materials

Quickly adhere hard-to bond surfaces with these adhesives, also known as super glue. These thick gels fill gaps between parts and won't drip on vertical surfaces. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

Dispense adhesives in syringes with a plunger (sold separately).

Dispense adhesives in cartridges with a standard caulk gun.

454 and 4541 are suitable for porous and dissimilar materials.

	Container
Mfr. Model No.	Size, fl. oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
454	0.1	Tube	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	0.3	Syringe	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	0.7	Tube	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	1	Syringe	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	7	Tube	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000
454	10.5	Cartridge	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000
4541	0.3	Syringe	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 180°	Clear	Cardboard, Fabric, Metal, Plastic, Rubber, Wood	0000000	00000
4541	0.7	Tube	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 180°	Clear	Cardboard, Fabric, Metal, Plastic, Rubber, Wood	00000000	00000

Spray Adhesives

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).

												Each
Mfr. Model No.	Container Net Weight, oz.	Approximate Coverage	Inverted Dispensing	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Temp. Range, °F	Color	For Joining	Cannot Be Sold To		1-11	12-Up
3M Adhesives
74	16.9	26 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Clear	Fabric, Foam	CA	0000000	000000	000000
74	16.9	26 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Orange	Fabric, Foam	CA	0000000	00000	00000
74	16.9	26 sq. ft. @ 2.5 gm/ft²	Yes	30 sec.	24 hrs.	200	0° to 200°	Orange	Fabric, Foam	CA	00000000	00000	00000
74CA	19	29 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Clear	Fabric, Foam	__	0000000	00000	00000
74CA	19	29 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Orange	Fabric, Foam	__	0000000	00000	00000
77	13.44	21 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	Clear	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	CA	0000000	00000	00000
77	16.8	26 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	White	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	CA	0000000	00000	00000
77CA	18	28 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	Clear	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	__	0000000	00000	00000

Quick-Set Contact Adhesives

Bonds reach full strength in 10 minutes. Apply this adhesive to one or both surfaces, then bring together to bond. For nonporous surfaces, air dry before bonding.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Container
Mfr. Model No.	Size, gal.	Type	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Consistency	Viscosity, cP	Temp. Range, °F	For Joining	Color		Each
3M Adhesives
1000NF	1	Jug	60 sec.	10 min.	400	Thin Liquid	750	60° to 80°	Fabric, Foam, Wood	Purple	00000000	0000000

Putty-to-Rubber Moldable Glue

This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.

Container
Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Elongation	Temp. Range, °F	Color	For Joining	Pkg. Qty.		Pkg.
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	Blue, Red, Yellow	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	000000
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	Gray	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	00000
0.12	One-Time-Use Packet	30 min.	24 hrs.	100%	-40° to 355°	White	Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	3	0000000	00000

Primers for Instant-Bond Adhesives

Improve instant-bond adhesive performance on hard-to-bond slippery plastics. These primers cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

Primers in brush-top bottles also include a spray head for easy dispensing.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Container
Mfr. Model No.	Size, fl. oz.	Type	Drying Time, sec.	Consistency	Viscosity, cP	Color	Cannot Be Sold To		Each
Loctite® Primers
7701	1.75	Brush-Top Bottle, Spray Bottle	30	Thin Liquid	1	Clear	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	0000000	000000
770	1.75	Brush-Top Bottle, Spray Bottle	30	Thin Liquid	1	White	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	00000000	00000
770	16	Can	30	Thin Liquid	1	White	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	00000000	00000

Surface Fillers for Canvas and Leather

Make flexible, waterproof repairs to rips and tears in canvas, leather, and acrylic fabric.

Container
Size, fl. oz.	Type	Consistency	Begins to Harden, min.	Reaches Full Strength, min.	Temp. Range, °F	Color	For Use Outdoors	For Use On		Each
6	Bottle	Thin Liquid	3	30	35° to 210°	Beige	Yes	Leather, Canvas, Acrylic Fabric	0000000	000000
16	Bottle	Thin Liquid	3	30	35° to 210°	Beige	Yes	Leather, Canvas, Acrylic Fabric	0000000	00000

Footwear Repair Adhesives

Repair rips, split seams, and detached soles to stop leaks in shoes, boots, and waders. These polyurethane adhesives create a strong, flexible seal that keeps water out, so they’re also used to coat seams. Use on leather, plastic, and rubber. They fully harden in 10 hours and dry clear.

Material	Color	Clarity	Consistency	Container Size, fl. oz.	Container Type	Begins to Harden	Reaches Full Strength	Mixing Required		Each
Polyurethane Epoxy	Clear	Clear	Thick Liquid	0.75	Tube	60 min.	10 hrs.	No	0000000	00000

Shoe and Boot Protective Epoxy Coatings

Extend the life of your footwear with these abrasion- and water-resistant epoxies. Stronger and more durable than most footwear materials, these epoxies are often used to coat and repair high-wear areas prone to rips, cracks, and water exposure, such as safety toes. They permanently bond to leather, plastic, and rubber. Each cartridge includes enough epoxy to coat the toes on one pair of shoes or boots. They fully harden in 24 hours and dry with a gloss finish, which can be rubbed away for a matte finish.

Material	Clarity	Consistency	Container Size, fl. oz.	Begins to Harden	Reaches Full Strength	Mixing Required	Mix Ratio	For Use On	Includes	Choose a Color		Each
Polyurethane Epoxy	Opaque	Gel	1.69	90 sec.	24 hrs.	Yes	1:1	Leather, Plastic, Rubber	Three Mixer Nozzles, Plunger, Applicator, Sandpaper	Beige, Black, Brown	000000	000000