We will reply to your message within an hour.
More
Temporarily stabilize objects on flat surfaces with this clear, reusable adhesive.
This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.
Improve instant-bond adhesive performance on hard-to-bond materials.
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Mix a small amount of water-based paint with this caulk to match the color of your surface.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
Also known as sloshing compounds, these surface fillers bond to rough, rusty surfaces in fuel tanks to repair leaks and prevent further corrosion.
Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.
Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.
Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.
Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring.
Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.
Keep the surface of your porcelain fixtures looking like new.
Remove oil- or solvent-based residue from metal, plastic, wood, carpet, upholstery, and painted surfaces.
Quickly dissolve and remove most adhesive residue.
Remove silicone, foam sealants, caulk, wet or dry latex-based foams, and construction adhesives.
Remove oil-based residue from hard surfaces, painted surfaces, vinyl, carpet, and fabric.
For strong bonds, clean and degrease surfaces before applying adhesives.