For Use On For Use On | Show |
|---|
|
For Use On For Use On | Hide |
|---|
Container Type Container Type |
|---|
 |  |
| Aerosol Can | Can |
 |  |
| Canister | Cartridge |
 |  |
| Nozzle-Top Can | Syringe |
 | |
| Tube |
Manufacturer Manufacturer |
|---|
|
Application Application |
|---|
|
Consistency Consistency |
|---|
|
Formulation Formulation |
|---|
|
|
For Joining For Joining |
|---|
|
Specifications Met Specifications Met |
|---|
|
Container Size Container Size |
|---|
|
|
Clarity Clarity |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Material Material |
|---|
|
Type Type |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
|
Environment Environment |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Structural Adhesives
More
About Sealant Flexibility
More
About Paint and Protective Coatings
More
Mildew-Resistant Silicone Sealants
Resistant to mold and mildew, these sealants are well suited to high-humidity environments. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to Canada are restricted by product labeling requirements.
Container | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Specifications Met | Color | Clarity | Cannot Be Sold To | Each | |
3M Silicone | ||||||||||||||||
| 8017 | 3 | __ | Tube | 10 min. | 24 hrs. | 350% | Not Rated | Soft (Durometer 20A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Wood | ASTM D412 | White | Clear | __ | 00000000 | 000000 |
| 8019 | 3 | __ | Tube | 10 min. | 24 hrs. | 350% | Not Rated | Soft (Durometer 20A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Wood | ASTM D412 | Clear | Clear | __ | 00000000 | 00000 |
| 8027 | 10.3 | __ | Cartridge | 10 min. | 24 hrs. | 350% | Not Rated | Soft (Durometer 20A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Wood | ASTM D412 | White | Clear | __ | 00000000 | 00000 |
| 8029 | 10.3 | __ | Cartridge | 10 min. | 24 hrs. | 350% | Not Rated | Soft (Durometer 20A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Wood | ASTM D412 | Clear | Clear | __ | 00000000 | 00000 |
Silicone | ||||||||||||||||
| __ | __ | 6.5 | Nozzle-Top Can | 10 min. | 24 hrs. | 400% | -25% to 25% | Soft (Durometer 25A) | -70° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | ASTM C920 Type S Grade NS Class 25, FDA Compliant 21 CFR 177.2600, Fed. Spec. TT-S-001543A, Fed. Spec. TT-S-00230C, MIL-A-46106 Type I, NSF/ANSI 51 | White | Opaque | Canada | 00000000 | 00000 |
| __ | 10.1 | __ | Cartridge | 10 min. | 24 hrs. | 400% | -25% to 25% | Soft (Durometer 25A) | -70° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | ASTM C920 Type S Grade NS Class 25, FDA Compliant 21 CFR 177.2600, Fed. Spec. TT-S-001543A, Fed. Spec. TT-S-00230C, MIL-A-46106 Type I, NSF/ANSI 51 | Clear | Clear | __ | 00000000 | 00000 |
| __ | 10.1 | __ | Cartridge | 10 min. | 24 hrs. | 400% | -25% to 25% | Soft (Durometer 25A) | -70° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | ASTM C920 Type S Grade NS Class 25, FDA Compliant 21 CFR 177.2600, Fed. Spec. TT-S-001543A, Fed. Spec. TT-S-00230C, MIL-A-46106 Type I, NSF/ANSI 51 | White | Opaque | __ | 00000000 | 00000 |
| __ | 10.1 | __ | Cartridge | 20 min. | 24 hrs. | 550% | -25% to 25% | Soft (Durometer 25A) | -40° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | ASTM C920 Type S Grade NS Class 25, Fed. Spec. TT-S-001543A, Fed. Spec. TT-S-00230C | Red | Opaque | __ | 00000000 | 00000 |
Epoxy Potting Compounds
Encase electronic assemblies in a layer of epoxy for protection from dust, chemicals, moisture, mechanical shock, and vibration. The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
Dry Time | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch | Overall | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Choose a Color | Each | |
3M Compounds—Extra Hard | ||||||||||||
| DP270 | 1.64 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | 00000000 | 000000 | |
| DP270 | 6.8 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | 00000000 | 00000 | |
| DP270 | 13.5 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | Black | 00000000 | 000000 |
| Dispensing Gun for 6.8 fl. oz. 3M Cartridges | 0000000 | Each | 0000000 |
| Mixer Nozzle for 6.8 fl. oz. 3M Cartridges | 0000000 | Each | 0000 |
| Mixer Nozzle for 1.64 fl. oz. and 1.69 fl. oz. 3M Cartridges (Mixing Elements: 16) | 0000000 | Each | 0000 |
| Dispensing Gun for 1.64 fl. oz. and 1.69 fl. oz. 3M Cartridges | 0000000 | Each | 000000 |
| Mixer Nozzle for 13.5 fl. oz. 3M Cartridges | 00000000 | Each | 0000 |
| Dispensing Gun for 13.5 fl. oz. 3M Cartridges | 00000000 | Each | 000000 |
| Mixer Nozzle for 1.64 fl. oz. 3M Cartridges | 0000000 | Each | 0000 |
Optically Clear Epoxy Potting Compounds
Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
Dry Time | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Optically Clear Epoxy Potting Compounds—Extra Hard | ||||||||||
| 1.7 | Thick Liquid | 40 | 24 | 229 | 0.45 | -65° to 275° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Amber | 0000000 | 000000 |
Two-Part Adhesive Dispensing Guns | |||
|---|---|---|---|
| Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
Ready-to-Use Silicone Potting Compounds
No mixing required --these potting compounds come ready to apply. Use them to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have good moisture resistance but poor chemical and abrasion resistance. Silicones provide excellent electrical insulation. They're also known as RTV (room-temperature vulcanizing).
Potting compounds that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Container | Dry Time | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Consistency | Touch | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Clarity | Color | Cannot Be Sold To | Each | |
Dow Corning Compounds—Medium Soft | |||||||||||||||
| 738 | 3 | Tube | Paste | 90 min. | 24 | 475 | Not Rated | -45° to 390° | UL Listed, UL Recognized Component, MIL-A-46146, UL 94 HB | Aluminum, Copper, Steel, Plastic, Rubber, Fiberglass | Opaque | White | __ | 0000000 | 000000 |
| 738 | 10 1/10 | Cartridge | Paste | 90 min. | 24 | 475 | Not Rated | -45° to 390° | UL Listed, UL Recognized Component, MIL-A-46146, UL 94 HB | Aluminum, Copper, Steel, Plastic, Rubber, Fiberglass | Opaque | White | __ | 0000000 | 00000 |
Dow Corning Compounds—Soft | |||||||||||||||
| 748 | 3 | Tube | Paste | 30 min. | 24 | 475 | Not Rated | -65° to 350° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Plastic, Rubber, Composites, Fiberglass, Glass | Opaque | Off-White | __ | 000000000 | 00000 |
| 748 | 10 1/10 | Cartridge | Paste | 30 min. | 24 | 475 | Not Rated | -65° to 350° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Plastic, Rubber, Composites, Fiberglass, Glass | Opaque | Off-White | __ | 000000000 | 00000 |
| 838 | 3 | Tube | Paste | 45 min. | 24 | Not Rated | Not Rated | -45° to 390° | UL Listed, UL Recognized Component, UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Opaque | White | __ | 0000000 | 00000 |
| 839 | 10.3 | Cartridge | Paste | 35 min. | 24 | Not Rated | Not Rated | -45° to 390° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Semi-Clear | Blue | __ | 0000000 | 00000 |
Momentive/GE Compounds—Soft | |||||||||||||||
| RTV162 | 2 4/5 | Tube | Paste | 4 hrs. | 48 | 450 | 0.2 | -75° to 400° | UL Recognized Component, MIL-A-46146 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Ceramic, Glass | Opaque | White | CA | 00000000 | 00000 |
| RTV162 | 10 1/10 | Cartridge | Paste | 4 hrs. | 48 | 450 | 0.2 | -75° to 400° | UL Recognized Component, MIL-A-46146 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Ceramic, Glass | Opaque | White | CA | 00000000 | 00000 |
Heavy Duty Optically Clear Light-Activated Coatings for Electronics
Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics. Thinner than potting compounds, it flows easily into small spaces between electrical components. The coating requires an ultraviolet curing lamp to reach full strength. Dispense with a gun (sold separately).
Dry Time | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, fl. oz. | Consistency | Touch, sec. | Overall, hrs. | Hardness Rating | Temp. Range, °F | Light Intensity Requirements to Reach Full Strength | For Use On | Color | Each | |
| 0.8 | Thick Liquid | 10 | 24 | Extra Hard | -65° to 300° | 15 seconds @ 100 mW/cm2 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Clear | 0000000 | 0000000 |
| Dispensing Guns for Syringes | 0000000 | Each | 000000 |
Heavy Duty Heat-Transfer Coatings for Electronics
This thermally conductive coating keeps electrical components cool by dissipating heat. Use it to bond transformers, transistors, and other heat-generating components to printed circuit boards and heat sinks.
Dry Time | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
| 0.8 | Paste | 5 | 12 | 678 | 0.76 | -65° to 300° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass | White | 0000000 | 000000 |
Heavy Duty Precise-Gap Heat-Transfer Coatings for Electronics
To effectively dissipate heat in the tightest spaces, this coating contains a filler that acts like a shim to produce a consistent 0.005" to 0.006" gap between components. Use it to bond transformers, transistors, and other heat-generating components to printed circuit boards and heat sinks.
Dry Time | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
| 0.8 | Paste | 5 | 24 | 678 | 0.808 | -65° to 300° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass | Blue | 0000000 | 000000 |
Protective Coatings
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Coatings in a can can be dipped, brushed, or sprayed.
Container | Dry Time | |||||||
|---|---|---|---|---|---|---|---|---|
| Size | Composition | Touch, min. | O'all | Approximate Coverage @ Thickness | For Use On | Color (Appearance) | Each | |
PVC Plastic—Can | ||||||||
| 1 gal. | Solvent Based | 30 | 24 hrs. | 60 sq. ft. @ 5 mil | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | Black (Semi-Gloss) | 00000000 | 0000000 |
| 1 gal. | Solvent Based | 30 | 24 hrs. | 60 sq. ft. @ 5 mil | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | Red (Semi-Gloss) | 00000000 | 000000 |
| 1 gal. | Solvent Based | 30 | 24 hrs. | 60 sq. ft. @ 5 mil | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | Yellow (Semi-Gloss) | 00000000 | 000000 |
Uncured Epoxy Removers
Less aggressive than our standard epoxy removers, these solvent-based wipes remove uncured epoxy adhesives and solder paste. They are often used to wipe excess epoxy and paste off printed circuit boards and other electronic components.
Uncured Epoxy Removers | Refill Wipes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Type | Wipe Length | Wipe Width | Wipes per Container | Composition | Harshness | For Use On | For Removing | Each | Each | ||
Wipe | |||||||||||
| Canister | 8" | 5" | 100 | Solvent Based | Moderate | Aluminum, Ceramic, Chrome, Fiberglass, Galvanized Steel, Painted Surfaces, Plastic, Rubber, Stainless Steel, Steel, Vinyl | Adhesive | 0000000 | 000000 | 0000000 | 000000 |
Surface-Preparation Cleaners for Adhesives
For strong bonds, clean and degrease surfaces before applying adhesives. These cleaners are NSF registered K1 for use in non-food-processing areas within food-processing facilities.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Manufacturer Model Number | Type | Net Weight, oz. | Composition | Harshness | For Use On | For Removing | Primary Chemical | Specifications Met | Each | |
Liquid | |||||||||||
| Loctite® | 7070 | Aerosol Can | 15 | Solvent Based | Harsh | Aluminum, Ceramic, Chrome, Fiberglass, Galvanized Steel, Glass, Iron, Plastic, Porcelain, Rubber, Stainless Steel, Steel, Vinyl | Dirt, Grease/Oil, Wax | Hydrotreated Light Petroleum Distillates (80-90%) | NSF Registered K1 | 00000000 | 000000 |
Footwear Repair Adhesives
Repair rips, split seams, and detached soles to stop leaks in shoes, boots, and waders. These polyurethane adhesives create a strong, flexible seal that keeps water out, so they’re also used to coat seams. Use on leather, plastic, and rubber. They fully harden in 10 hours and dry clear.
| Material | Color | Clarity | Consistency | Container Size, fl. oz. | Container Type | Begins to Harden | Reaches Full Strength | Mixing Required | Each | |
| Polyurethane Epoxy | Clear | Clear | Thick Liquid | 0.75 | Tube | 60 min. | 10 hrs. | No | 0000000 | 00000 |
Shoe and Boot Protective Epoxy Coatings
Extend the life of your footwear with these abrasion- and water-resistant epoxies. Stronger and more durable than most footwear materials, these epoxies are often used to coat and repair high-wear areas prone to rips, cracks, and water exposure, such as safety toes. They permanently bond to leather, plastic, and rubber. Each cartridge includes enough epoxy to coat the toes on one pair of shoes or boots. They fully harden in 24 hours and dry with a gloss finish, which can be rubbed away for a matte finish.