Clear All
Consistency Consistency |
|---|
|
Color Color |
|---|
 | Gray |
Type Type |
|---|
|
Maximum Thickness Maximum Thickness |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Formulation Formulation |
|---|
|
For Use Outdoors For Use Outdoors |
|---|
|
Reaches Full Strength Reaches Full Strength |
|---|
|
Approximate Coverage @ Thickness Approximate Coverage@ Thickness |
|---|
|
Clarity Clarity |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Manufacturer Manufacturer |
|---|
|
Manufacturer Model Number ManufacturerModel Number | Show |
|---|
|
Manufacturer Model Number ManufacturerModel Number | Hide |
|---|
Mix Ratio Mix Ratio |
|---|
|
Mixing Required Mixing Required |
|---|
|
Manufacturer Model Name Manufacturer Model Name |
|---|
|
Begins to Harden Begins to Harden |
|---|
|
Large-Particle Abrasion-Resistant Surface Fillers for Metal
For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers. The size listed is the combined total of the two parts.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Nordbak Wearing Compound | ||||||||||||||
| PC 7218 | 5 | Jar, Can | 30 | 7 | Paste | 2:1 | 260 sq. in. @ 1/4" | 1/4" | -15° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 0000000 |
| PC 7218 | 25 | Pail, Can | 30 | 7 | Paste | 2:1 | 1,240 sq. in. @ 1/4" | 1/4" | -15° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 |