Filter by
Color
Type
Maximum Temperature
Consistency
Manufacturer Model Name
Formulation
Manufacturer Model Number
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Minimum Temperature
REACH
RoHS
Mix Ratio
Mixing Required
Container Net Weight
Clarity
For Use Outdoors
Reaches Full Strength
Approximate Coverage @ Thickness
Manufacturer
Begins to Harden
Impact-Resistant Surface Fillers for Metal
These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders. The size listed is the combined total of the two parts.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Nordbak High Impact Wearing Compound | |||||||||||||||
| PC 9313 | 25 | Pail, Can | 30 | 6 | Paste | 2:1 | 1,240 sq. in. @ 1/4" | 1/4" | Yes | -20° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 |