Speed Limiting Direction Speed Limiting Direction |
|---|
|
Extended Length Extended Length |
|---|
|
Maximum Force Maximum Force |
|---|
|
|
Compressed Length Compressed Length |
|---|
|
|
Force Mechanism Force Mechanism |
|---|
|
Rod Material Rod Material |
|---|
|
End Fitting Type End Fitting Type |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Seal Material Seal Material |
|---|
|
Body Finish Body Finish |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Linear Speed Limiters
Put an end to lids and doors that slam shut or fly open—install these speed limiters for smooth, controlled motion. For speed limiters with adjustable resistance, pull the rod until it's fully extended, then twist it to change the resistance.
A cycle is one rod stroke from extended to compressed and back to extended. Free travel of stroke is the percentage of the stroke that speed limiters move with no resistance, before speed control engages.
Compression speed limiters prevent closing doors from slamming.
Extension speed limiters prevent doors from flying open.
Compression and extension speed limiters prevent doors from slamming and flying open.
Rod | Ball Stud | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stroke Lg. | Extended Lg. | Compressed Lg. | Max. Force, lbs. | Free Travel of Stroke | Max. Cycles per Minute | Rod Material | Body Material | Body Dia. | Dia. | Thread Size | Thread Pitch, mm | Dia., mm | Lg. | Thread Lg. | Thread Size | Thread Pitch, mm | Each | |
Compression | ||||||||||||||||||
Variable Adjustment | ||||||||||||||||||
| 1" | 5.3" | 4.3" | 112 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.59" | 0.24" | M5 | 0.8 | 13 | 0.97" | 0.35" | M5 | 0.8 | 0000000 | 0000000 |
| 2" | 7.3" | 5.3" | 112 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.59" | 0.24" | M5 | 0.8 | 13 | 0.97" | 0.35" | M5 | 0.8 | 0000000 | 000000 |
| 2" | 8.3" | 6.3" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.87" | 0.31" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 3" | 9.2" | 6.3" | 112 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.59" | 0.24" | M5 | 0.8 | 13 | 0.97" | 0.35" | M5 | 0.8 | 0000000 | 000000 |
| 3.9" | 12.2" | 8.3" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.87" | 0.31" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 3.9" | 12.6" | 8.7" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 5.9" | 16.1" | 10.2" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.87" | 0.31" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 5.9" | 16.5" | 10.6" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 7.9" | 20.5" | 12.6" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 7.9" | 22.2" | 14.4" | 720 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.57" | 0.55" | M14 | 1.5 | 30 | 2.48" | 1.1" | M14 | 1.5 | 0000000 | 000000 |
| 9.8" | 24.4" | 14.6" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 11.8" | 28.3" | 16.5" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 11.8" | 30.1" | 18.3" | 720 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.57" | 0.55" | M14 | 1.5 | 30 | 2.48" | 1.1" | M14 | 1.5 | 0000000 | 000000 |
Extension | ||||||||||||||||||
Variable Adjustment | ||||||||||||||||||
| 1" | 5.3" | 4.3" | 112 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.59" | 0.24" | M5 | 0.8 | 13 | 0.97" | 0.35" | M5 | 0.8 | 0000000 | 000000 |
| 2" | 7.3" | 5.3" | 112 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.59" | 0.24" | M5 | 0.8 | 13 | 0.97" | 0.35" | M5 | 0.8 | 0000000 | 000000 |
| 2" | 8.3" | 6.3" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.87" | 0.31" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 3" | 9.2" | 6.3" | 112 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.59" | 0.24" | M5 | 0.8 | 13 | 0.97" | 0.35" | M5 | 0.8 | 0000000 | 000000 |
| 3.9" | 12.2" | 8.3" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.87" | 0.31" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 3.9" | 12.6" | 8.7" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 5.9" | 16.1" | 10.2" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.87" | 0.31" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 5.9" | 16.5" | 10.6" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 7.9" | 20.5" | 12.6" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 7.9" | 22.2" | 14.4" | 720 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.57" | 0.55" | M14 | 1.5 | 30 | 2.48" | 1.1" | M14 | 1.5 | 0000000 | 000000 |
| 9.8" | 24.4" | 14.6" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 11.8" | 28.3" | 16.5" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 11.8" | 30.1" | 18.3" | 720 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.57" | 0.55" | M14 | 1.5 | 30 | 2.48" | 1.1" | M14 | 1.5 | 0000000 | 000000 |
Compression and Extension | ||||||||||||||||||
Variable Adjustment | ||||||||||||||||||
| 1" | 5.3" | 4.3" | 112 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.59" | 0.24" | M5 | 0.8 | 13 | 0.97" | 0.35" | M5 | 0.8 | 0000000 | 000000 |
| 2" | 7.3" | 5.3" | 112 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.59" | 0.24" | M5 | 0.8 | 13 | 0.97" | 0.35" | M5 | 0.8 | 0000000 | 000000 |
| 2" | 8.3" | 6.3" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.87" | 0.31" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 3" | 9.2" | 6.3" | 112 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.59" | 0.24" | M5 | 0.8 | 13 | 0.97" | 0.35" | M5 | 0.8 | 0000000 | 000000 |
| 3.9" | 12.2" | 8.3" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.87" | 0.31" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 3.9" | 12.6" | 8.7" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 5.9" | 16.1" | 10.2" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 0.87" | 0.31" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 5.9" | 16.5" | 10.6" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 7.9" | 20.5" | 12.6" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 7.9" | 22.2" | 14.4" | 720 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.57" | 0.55" | M14 | 1.5 | 30 | 2.48" | 1.1" | M14 | 1.5 | 0000000 | 000000 |
| 9.8" | 24.4" | 14.6" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 11.8" | 28.3" | 16.5" | 270 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.1" | 0.39" | M8 | 1.25 | 20 | 1.52" | 0.65" | M8 | 1.25 | 0000000 | 000000 |
| 11.8" | 30.1" | 18.3" | 720 | 20% | Not Rated | Chrome-Plated Steel | Anodized Aluminum | 1.57" | 0.55" | M14 | 1.5 | 30 | 2.48" | 1.1" | M14 | 1.5 | 0000000 | 000000 |
Precise-Control Linear Speed Limiters
Regulate the speed or feed rate of drill presses, milling machines, lathes, and similar devices. These speed limiters have a knob with numbered scale so you can make precise adjustments to the resistance. Insert a rod in the mounting hole in the knob to rotate for adjustments.
A cycle is one rod stroke from extended to compressed and back to the original extended position. Free travel of stroke is 0%, so the entire stroke is speed controlled.
For technical drawings and 3-D models, click on a part number.
Speed Limiters
Rod | Body | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stroke Lg. | Extended Lg. | Compressed Lg. | Max. Force, lbs. | Max. Cycles per Minute | Material | Dia. | Seal Material | Material | Dia. | Adjustment Hole Dia. | Temp. Range, ° F | Each | |
Compression | |||||||||||||
Variable Adjustment | |||||||||||||
| 0.5" | 6.33" | 5.83" | 1,200 | Not Rated | Stainless Steel | 0.31" | Neoprene Rubber | Zinc-Plated Steel | 0.94" | 0.31" | 40° to 135° | 000000 | 0000000 |
| 1" | 7.83" | 6.83" | 1,200 | Not Rated | Stainless Steel | 0.31" | Neoprene Rubber | Zinc-Plated Steel | 0.94" | 0.31" | 40° to 135° | 000000 | 000000 |
| 2" | 10.87" | 8.87" | 1,200 | Not Rated | Stainless Steel | 0.31" | Neoprene Rubber | Zinc-Plated Steel | 0.94" | 0.31" | 40° to 135° | 000000 | 000000 |
| 3" | 13.87" | 10.87" | 1,200 | Not Rated | Stainless Steel | 0.31" | Neoprene Rubber | Zinc-Plated Steel | 0.94" | 0.31" | 40° to 135° | 000000 | 000000 |
Mounting Blocks
| Wd. | Ht. | Dp. | Material | Mount. Hole Dia. | Ctr.-to-Ctr. Mount. Hole Ht. | Each | |
| 1 1/4" | 2 1/4" | 1 1/4" | Aluminum | 0.39" | 1.44" | 0000000 | 000000 |