These nozzles handle coolant pressure up to 150 psi.

For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.

These nozzles handle coolant pressure up to 150 psi.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.

These flexible nozzles have threads on both ends for connecting a grease gun to a dispensing tip.

These flexible extensions have a quick-disconnect fitting that snaps into your dispensing tip, so you can lubricate grease fittings that are hard to reach.

Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.

The magnetic base mounts to your work surface and has a control valve for adjusting airflow.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Control consumption and noise by adjusting the airflow.

Adjust airflow to control consumption and noise.

Two inlets allow connection to air lines above or below. Use the top inlet when the blowgun is suspended from an overhead hose and the bottom inlet for bench and floor hoses.

Compact enough to carry with you, these guns have a built-in quick-disconnect hose coupling for easy connection to an air line.

No need to juggle multiple nozzles with different spray angles—just turn the cover to adjust the spray angle from 0° to 80°.

No need to switch between nozzles—push these nozzles in and pull them out to change their pressure level, and twist their cover to adjust the spray angle between 0° and 40°. Their quick-disconnect hose connection makes attaching and removing them easy.

For light duty spray-down applications, attach these wash guns to any standard garden hose.