Roller Diameter Roller Diameter |
|---|
|
|
|
Roller Material Roller Material |
|---|
|
Drive Style Drive Style |
|---|
 | |
 |
For Load Direction For Load Direction |
|---|
 | Radial |
 | Combined Radial and Thrust |
 | Thrust |
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
|---|
|
Shoulder Length Shoulder Length |
|---|
|
|
|
Stud Material Stud Material |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Threaded Track Rollers with Adjustable Shoulder
Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Secure the stud with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Ht. Adjustment Capability | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | ||||||||||||||||
| 3/4" | 1/2" | 3/8" | 3/8" | 3/8"-24 | 3/8" | 1/2" | 1/2" | 0.015" | 5,000 | 3,100 | 1,800 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 7/8" | 1/2" | 3/8" | 3/8" | 3/8"-24 | 3/8" | 1/2" | 1/2" | 0.015" | 5,000 | 3,100 | 1,800 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1" | 5/8" | 7/16" | 1/2" | 7/16"-20 | 1/2" | 5/8" | 1/2" | 0.03" | 4,500 | 4,800 | 2,300 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 1/8" | 5/8" | 7/16" | 1/2" | 7/16"-20 | 1/2" | 5/8" | 1/2" | 0.03" | 4,500 | 4,800 | 2,300 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 1/4" | 3/4" | 1/2" | 5/8" | 1/2"-20 | 5/8" | 11/16" | 5/8" | 0.03" | 3,900 | 6,600 | 4,200 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 3/8" | 3/4" | 1/2" | 5/8" | 1/2"-20 | 5/8" | 11/16" | 5/8" | 0.03" | 3,900 | 6,600 | 4,200 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 1/2" | 7/8" | 5/8" | 3/4" | 5/8"-18 | 3/4" | 7/8" | 3/4" | 0.03" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 5/8" | 7/8" | 5/8" | 3/4" | 5/8"-18 | 3/4" | 7/8" | 3/4" | 0.03" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 3/4" | 1" | 3/4" | 7/8" | 3/4"-16 | 7/8" | 1" | 7/8" | 0.03" | 2,600 | 12,000 | 6,400 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 7/8" | 1" | 3/4" | 7/8" | 3/4"-16 | 7/8" | 1" | 7/8" | 0.03" | 2,600 | 12,000 | 6,400 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 2" | 1 1/4" | 7/8" | 1" | 7/8"-14 | 1" | 1 3/16" | 1" | 0.03" | 2,200 | 16,000 | 9,600 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 2 1/4" | 1 1/4" | 7/8" | 1" | 7/8"-14 | 1" | 1 3/16" | 1" | 0.03" | 2,200 | 16,000 | 9,600 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Steel Crowned Rollers with Seal | ||||||||||||||||
| 3/4" | 1/2" | 3/8" | 3/8" | 3/8"-24 | 3/8" | 1/2" | 1/2" | 0.015" | 5,000 | 3,100 | 1,800 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 7/8" | 1/2" | 3/8" | 3/8" | 3/8"-24 | 3/8" | 1/2" | 1/2" | 0.015" | 5,000 | 3,100 | 1,800 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1" | 5/8" | 7/16" | 1/2" | 7/16"-20 | 1/2" | 5/8" | 1/2" | 0.03" | 4,500 | 4,800 | 2,300 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 1/4" | 3/4" | 1/2" | 5/8" | 1/2"-20 | 5/8" | 11/16" | 5/8" | 0.03" | 3,900 | 6,600 | 4,200 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 3/8" | 3/4" | 1/2" | 5/8" | 1/2"-20 | 5/8" | 11/16" | 5/8" | 0.03" | 3,900 | 6,600 | 4,200 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 1/2" | 7/8" | 5/8" | 3/4" | 5/8"-18 | 3/4" | 7/8" | 3/4" | 0.03" | 3,100 | 8,800 | 5,000 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 1 3/4" | 1" | 3/4" | 7/8" | 3/4"-16 | 7/8" | 1" | 7/8" | 0.03" | 2,600 | 12,000 | 6,400 | 250° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 2" | 1 1/4" | 7/8" | 1" | 7/8"-14 | 1" | 1 3/16" | 1" | 0.03" | 2,200 | 16,000 | 9,600 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 2 1/4" | 1 1/4" | 7/8" | 1" | 7/8"-14 | 1" | 1 3/16" | 1" | 0.03" | 2,200 | 16,000 | 9,600 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Roller, mm | Stud, mm | Thread | Shoulder, mm | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Dia. | Lg. | Ht. Adjustment Capability, mm | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | |||||||||||||||||
| 16 | 11 | 6 | 16 | M6 | 1 | 9 | 9 | 7 | 0.5 | 13,000 | 520 | 1,300 | 250° | Needle Roller | Mounting Hardware | 0000000 | 0000000 |
| 19 | 11 | 8 | 20 | M8 | 1.25 | 11 | 11 | 9 | 0.5 | 10,000 | 1,100 | 1,500 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 22 | 12 | 10 | 23 | M10 | 1 | 12 | 13 | 10 | 0.5 | 9,000 | 2,300 | 1,700 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 26 | 12 | 10 | 23 | M10 | 1 | 12 | 13 | 10 | 0.5 | 9,000 | 2,300 | 1,700 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Steel Crowned Rollers with Seal | |||||||||||||||||
| 16 | 11 | 6 | 16 | M6 | 1 | 9 | 9 | 7 | 0.5 | 13,000 | 520 | 1,300 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 19 | 11 | 8 | 20 | M8 | 1.25 | 11 | 11 | 9 | 0.5 | 10,000 | 1,100 | 1,500 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 26 | 12 | 10 | 23 | M10 | 1.25 | 13 | 13 | 10 | 0.5 | 9,000 | 2,300 | 1,700 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Threaded V-Groove Track Rollers with Adjustable Shoulder
Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Secure the stud with a nut for through-hole mounting. All rollers are permanently lubricated.
440C stainless steel rollers offer better corrosion resistance than steel rollers.
Rollers with a plastic overmold make less noise than other rollers, and they’re suitable for corrosive environments. However, they have lower weight capacities than other similarly sized rollers and they’re less corrosion resistant than other stainless steel rollers.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Groove | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Includes | Each | |
Steel V-Groove Rollers with Seal | |||||||||||||||||
| 1 1/2" | 45/64" | 7/16" | 1" | 7/16"-20 | 1/2" | 3/4" | 1/32" | 3/8" | 3/16" | 8,000 | 230 | 230 | 140 | 225° | Mounting Hardware | 0000000 | 0000000 |
| 1 1/2" | 25/32" | 7/16" | 1" | 7/16"-20 | 1/2" | 3/4" | 1/32" | 3/8" | 3/16" | Not Rated | 300 | 300 | 200 | 225° | Mounting Hardware | 0000000 | 000000 |
| 2" | 13/16" | 1/2" | 1 1/4" | 1/2"-20 | 5/8" | 13/16" | 1/32" | 5/8" | 5/16" | 6,000 | 600 | 500 | 370 | 225° | Mounting Hardware | 0000000 | 000000 |
| 2 1/2" | 1 1/4" | 3/4" | 1 3/4" | 3/4"-16 | 57/64" | 1 3/8" | 1/16" | 1" | 1/2" | 6,000 | 1,100 | 1,000 | 470 | 225° | Mounting Hardware | 0000000 | 000000 |
| 3 1/2" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/64" | 1 1/2" | 1/16" | 1 1/4" | 5/8" | 4,000 | 2,200 | 1,900 | 1,300 | 225° | Mounting Hardware | 0000000 | 000000 |
| 3 1/2" | 1 57/64" | 3/4" | 2" | 3/4"-16 | 1 1/64" | 1 1/2" | 1/8" | 1 1/4" | 5/8" | Not Rated | 7,200 | 3,700 | 3,100 | 225° | Mounting Hardware | 0000000 | 000000 |
Roller, mm | Stud, mm | Thread | Groove, mm | Radial Load Cap., lbs. | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Shoulder Lg., mm | Hex Shoulder Wd., mm | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Features | Includes | Each | |
Steel V-Groove Rollers with Seal | |||||||||||||||||||
| 20 | 8 | 6 | 8 | M6 | 1 | 6 | 3.4 | 11.11 | 4 | 2 | 5,000 | 270 | 270 | 50 | 245° | __ | Mounting Hardware | 0000000 | 000000 |
| 31 | 11 | 10 | 11 | M8 | 1.25 | 9 | 4.1 | 14.29 | 6 | 3 | 3,400 | 590 | 590 | 140 | 245° | __ | Mounting Hardware | 0000000 | 00000 |
| 31 | 11 | 10 | 25 | M10 | 1.5 | 15 | 2.6 | 14 | 10 | 3 | 3,400 | 590 | 590 | 140 | 210° | __ | Mounting Hardware | 0000000 | 00000 |
| 46 | 16 | 11 | 15 | M10 | 1.5 | 11 | 5.7 | 19.05 | 8 | 4 | 2,200 | 1,300 | 1,300 | 380 | 245° | __ | Mounting Hardware | 0000000 | 00000 |
| 46 | 16 | 12 | 30 | M12 | 1.75 | 18 | 3.4 | 19 | 8 | 4 | 2,200 | 1,300 | 1,300 | 350 | 210° | __ | Mounting Hardware | 0000000 | 00000 |
| 60 | 19 | 12 | 19 | M12 | 1.75 | 14 | 6.8 | 22.23 | 9 | 5 | 1,700 | 2,100 | 2,100 | 900 | 210° | __ | __ | 0000000 | 00000 |
440C Stainless Steel V-Groove Rollers with Seal | |||||||||||||||||||
| 20 | 8 | 6 | 15 | M6 | 1 | 9 | 2.1 | 12 | 4 | 2 | 5,300 | 220 | 220 | 40 | 500° | __ | Mounting Hardware | 0000000 | 000000 |
| 46 | 16 | 12 | 30 | M12 | 1.75 | 18 | 3.4 | 19 | 8 | 4 | 2,200 | 1,100 | 1,100 | 300 | 500° | __ | Mounting Hardware | 0000000 | 000000 |
440C Stainless Steel V-Groove Rollers without Seal | |||||||||||||||||||
| 20 | 8 | 6 | 8 | M6 | 1 | 6 | 3.3 | 11.11 | 4 | 2 | 5,300 | 270 | 270 | 50 | 245° | Shielded | __ | 0000000 | 00000 |
| 20 | 8 | 6 | 8 | M6 | 1 | 6 | 3.3 | 12 | 4 | 2 | 975 | 12 | 12 | 6 | 245° | Plastic Overmold, Shielded | __ | 0000000 | 00000 |
| 20 | 8 | 6 | 15 | M6 | 1 | 9 | 2.1 | 12 | 4 | 2 | 3,400 | 270 | 270 | 50 | 245° | Shielded | Mounting Hardware | 0000000 | 00000 |
| 31 | 11 | 10 | 11 | M8 | 1.25 | 8 | 4 | 14 | 6 | 3 | 620 | 16 | 16 | 9 | 245° | Plastic Overmold, Shielded | __ | 0000000 | 00000 |