Battery Connection Type Battery Connection Type |
|---|
 | Clamp |
 | Ring Terminal |
 | Two-Pin SAE Connector |
 | North American Style Connector |
 | 12V Vehicle Plug |
 | Sheathed Alligator Clip |
Battery Chemistry Battery Chemistry |
|---|
|
Battery Connection Cord Length Battery ConnectionCord Length |
|---|
|
|
Power Plug Type Power Plug Type |
|---|
|
For Minimum Battery Capacity For MinimumBattery Capacity |
|---|
|
For Maximum Battery Capacity For MaximumBattery Capacity |
|---|
|
Charger Number Charger Number |
|---|
|
For Battery Number For Battery Number |
|---|
|
For Battery Capacity Range For Battery Capacity Range |
|---|
|
Chargers for Large-Cell Batteries
After the battery is fully charged, these chargers continuously provide a low-level charge to maintain the battery without overcharging.
Style D must be used with lithium iron phosphate (LiFePO4) batteries.
Chargers with reverse-polarity protection prevent sparks and short circuits if the connectors touch or if they're not connected properly to the battery.
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Features | Each | |
| 6/12 | 1.2-200 | 1.25 | Clamp (18"), 5/16" ID Ring Terminal (18"), Two-Pin SAE Connector (6 ft.) | Two Prong | 6 | 120V AC | 2" | 7" | 3 3/4" | Charge Status Indicator Reverse-Polarity Protection | 00000000 | 000000 |
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Features | Each | |
| 6/12 | 12-68 | 2, 10 | Clamp (7 ft.) | Two Prong | 7 | 120V AC | 7 3/4" | 10 1/2" | 3 3/4" | Charge Status Indicator Reverse-Polarity Protection | 000000 | 000000 |
| 12 | 13-100 | 20 | Clamp (6 ft.) | Three Prong | 6 | 120V AC | 11" | 8" | 6" | Charge Status Indicator Reverse-Polarity Protection | 000000 | 000000 |
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Features | Each | |
| 24 | 80-150 | 10 | Clamp (8 ft.) | Three Prong | 7 | 120V AC | 6 1/2" | 7" | 8" | Charge Status Indicator Reverse-Polarity Protection | 000000 | 0000000 |
| 24 | 150-350 | 25 | Clamp (8 ft.) | Three Prong | 7 | 120V AC | 8 1/2" | 10" | 9 1/2" | Charge Status Indicator Reverse-Polarity Protection | 000000 | 000000 |
| Charger No. | For Battery No. | For Lithium Type | For Battery Voltage | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Features | Each | |
| K2C12V4A03 | K2B12V7EB, K2B12V10EB, K2B12V19EB, K2B12VG27-2, K2B12VG27-3, K2B12VU1-1 | Lithium Iron Phosphate (LiFePO4) | 12 | 4 | Sheathed Alligator Clip (4 ft.) | Two Prong | 4 | 120V AC | 1 3/16" | 5 1/2" | 2 3/8" | Charge Status Indicator | 000000 | 000000 |
| K2C24V2A03 | K2B24V10EB | Lithium Iron Phosphate (LiFePO4) | 24 | 2 | Sheathed Alligator Clip (4 ft.) | Two Prong | 4 | 120V AC | 1 3/16" | 5 1/2" | 2 3/8" | Charge Status Indicator | 000000 | 00000 |
Water-Resistant Chargers for Large-Cell Batteries
Charge batteries even in wet environments—a sealed housing keeps water out. They have reverse-polarity protection to prevent sparks and short circuits if the ring terminals touch or if they're not connected properly to the battery. After the battery is fully charged, they continuously provide a low-level charge to maintain the battery without overcharging.
Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | No. of | Dia. | Mounting Fasteners Included | Each | |
| 12 | 5-67 | 5 | Two-Pin SAE Connector (4 ft.), 5/16" ID Ring Terminal (18") | Three Prong | 6 | 120V AC | 5" | 5 1/4" | 2" | 4 | 3/16" | No | 00000000 | 0000000 |
| 24 | 2.5-67 | 2.5 | Two-Pin SAE Connector (4 ft.), 5/16" ID Ring Terminal (18") | Three Prong | 6 | 120V AC | 5" | 5 1/4" | 2" | 4 | 3/16" | No | 00000000 | 000000 |
Stationary Chargers for Large-Cell Batteries
Bring batteries to these chargers for maintenance. To prevent overcharging, they automatically shut off when battery is fully charged.
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Features | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
For Wet-Cell Lead Acid Batteries | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 12 | 240-300 | 30 | 175-amp North American Style Connector (8 ft.) | Charge Status Indicator, Ammeter | Three Prong | 7 | 120V AC | 12 3/16" | 7 1/2" | 5 1/2" | 0000000 | 0000000 |
| 24 | 240-300 | 30 | 175-amp North American Style Connector (8 ft.) | Charge Status Indicator, Ammeter | Three Prong | 7 | 120V AC | 12 3/16" | 7 1/2" | 5 1/2" | 0000000 | 000000 |
| 36 | 160-200 | 25 | 175-amp North American Style Connector (8 ft.) | Charge Status Indicator, Ammeter | Three Prong | 7 | 120V AC | 12 3/16" | 7 1/2" | 5 1/2" | 0000000 | 000000 |
Multiple-Battery Stationary
Chargers for Large-Cell Batteries
Charge up to eight batteries at once. After the battery is fully charged, these chargers continuously provide a low-level charge to maintain the battery without overcharging.
| For Battery Voltage | For No. of Batteries | For Battery Cap. Range, amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Features | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 8 | 24/44-75 | 2-12 | Clamp (6 ft.) | Charge Status Indicator | Three Prong | 9 | 120V AC | 12 1/8" | 19 1/8" | 12" | 0000000 | 0000000 |
Hand-Held Charger/Starters for Large-Cell Batteries
Small enough to carry, these charger/starters provide a 125-amp starting current. They have reverse-polarity protection to prevent sparks and short circuits if the clamps touch or if they're not connected properly to the battery. After the battery is fully charged, they continuously provide a low-level charge to maintain the battery without overcharging.
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Starting Current, A | Battery Connection Type (Cord Lg.) | Features | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 24-75 | 2/15-40 | 125 | Clamp (8 ft.) | Charge Status Indicator, Reverse-Polarity Protection | Two Prong | 6 | 120V AC | 8" | 8 3/4" | 8 3/4" | 0000000 | 0000000 |
Charger/Starters for Large-Cell Batteries
Wheel these charger/starters to batteries that need maintenance. They provide higher starting currents than Hand-Held Charger/Starters for Large-Cell Batteries. All have reverse-polarity protection to prevent sparks and short circuits if the clamps touch or if they're not connected properly to the battery.
Automatic charger/starters turn off when the battery is fully charged, but will continue to monitor the battery and turn back on if voltage drops.
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Starting Current, A | Battery Connection Type (Cord Lg.) | Features | Wheel Material | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
Automatic | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | ||||||||||||||
| 12 | 13-120 | 45 | 130 | Clamp (6 ft.) | Power Supply, Ammeter, Reverse-Polarity Protection | Rubber | Three Prong | 6 | 120V AC | 33" | 12" | 12" | 000000 | 0000000 |
Solar Panel Chargers for Large-Cell Batteries
Keep batteries charged even when electricity is unavailable. These chargers can be used in any battery capacity range.
Automatic chargers continuously provide a low-level charge to maintain the battery without overcharging.
Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Output Wattage, W | Battery Connection Type (Cord Lg.) | No. of | Dia. | Mounting Fasteners Included | Includes | Backing Material | Ht. | Wd. | Dp. | Each | |
Rigid | ||||||||||||||
Automatic Chargers for Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | ||||||||||||||
| 12 | __ | 0.2 | 2.4 | Clamp (108"), 12V Vehicle Plug (108") | 4 | 0.11" | Yes | __ | __ | 19 3/8" | 10 1/4" | 1 3/8" | 00000000 | 000000 |
| 12 | __ | 0.4 | 4.8 | Clamp (132"), 12V Vehicle Plug (132") | 4 | 0.11" | Yes | __ | __ | 17 1/4" | 15" | 2 3/4" | 00000000 | 00000 |
Flexible | ||||||||||||||
Manual Chargers for Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | ||||||||||||||
| 12 | 2-50 | 0.45 | 7 | 5/16" ID Ring Terminal (15ft.), 3/8" ID Ring Terminal (15ft.) | 4 | 3/8" | No | 3-ft. Cord with 12V Vehicle Socket | Vinyl Plastic | 23" | 14 1/2" | 3/64" | 0000000 | 000000 |
| 12 | 5-100 | 0.9 | 14 | 5/16" ID Ring Terminal (15ft.), 3/8" ID Ring Terminal (15ft.) | 4 | 3/8" | No | 3-ft. Cord with 12V Vehicle Socket | Vinyl Plastic | 42" | 14 1/2" | 3/64" | 0000000 | 000000 |
| 5-ft. Power Cord with 12V Vehicle Plug for Flexible Chargers | 0000000 | Each | 000000 |
Power Cords for Large-Cell Battery Solar Panel Chargers
Connect a flexible solar panel charger to a vehicle outlet to charge the vehicle’s battery.
| Manufacturer | Manufacturer Model No. | Battery Connection Type | Battery Connection Cord Lg., ft. | Each | |
| PowerFilm | RA-1 | 12V Vehicle Plug | 5 | 0000000 | 000000 |