These blowguns have a metal body.

The rubber tip won't damage parts.

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Two inlets allow connection to air lines above or below. Use the top inlet when the blowgun is suspended from an overhead hose and the bottom inlet for bench and floor hoses.

Connect the included hose to your air supply and these blowguns are ready to use.

The included hose is ready to connect to your air supply.

These guns include a rubber tip that won't damage your workpiece.

Also known as air-shield and safety-shield blowguns, an outer air curtain deflects flying chips and dust while the center airstream blows away debris.

The extra length lets you access hard-to-reach areas.

These blowguns provide more than two times the airflow of standard guns.

Clear dust and debris, test air ducts for leaks, and dry large surfaces without needing a compressed air line.

The flat nozzle distributes air over a wide area.

These tubular holders have open ends. Slide a blowgun inside for storage.

Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.

Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).

Safely blow dust and debris off your clothes. These blowers are a safer alternative to compressed air and help you meet OSHA regulations.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Adjust airflow to control consumption and noise.

These premium nozzles are engineered for the most efficient airflow consumption.

Also known as air-shield and safety-shield nozzles, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

The extra length allows access into hard-to-reach areas.

The magnetic base mounts to your work surface and has a control valve for adjusting airflow.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Shaped to fit into extremely tight spaces, these nozzles can be used to remove parts from molds. Tap the wedge into position, attach the nozzle to a blowgun, and activate the airflow to release the part.

Attach one of these swivels to an air nozzle to direct air 30° left, right, up, and down.

Create a sheet of high-velocity air.

Secure an air knife to the bracket and position where needed. Two swiveling joints allow 360° movement.

Also known as air wipes, these use a 360° airstream to blow off, dry, clean, and cool tubes, cables, extruded shapes, and hoses.

Dry and cool parts, wipe conveyor belts, control coating depth, and blow liquid, chips, and dust off of equipment in sanitary environments.

Combine high-volume airflow with low-heat output for warming and drying.

Use these blowers for production drying, heat shrinking, and other applications requiring heat over 1000°F.

Prevent buildup of electrostatic discharge (ESD) that can damage electronic components.