Air Blowoff Nozzles | McMaster-Carr

Shaped to fit into extremely tight spaces, these nozzles can be used to remove parts from molds. Tap the wedge into position, attach the nozzle to a blowgun, and activate the airflow to release the part.

Blow-and-Spray Air Nozzles

Convert your blowgun to a spray gun. These nozzles spray air and liquids at the same time.

Air Nozzle Swivels

Attach one of these swivels to an air nozzle to direct air 30° left, right, up, and down.

Blow-and-Brush Air Nozzles

Blow debris and sweep it away with the built-in brush.

Blowguns

These blowguns have a metal body.

Plastic-Body Blowguns

The lightweight plastic construction makes these blowguns more comfortable to hold than metal.

Blowguns with Nonmarring Tip

The rubber tip won't damage parts.

Low-Noise Blowguns

Designed to reduce noise, these blowguns are quieter than similar standard guns.

Chip-Guard Blowguns

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Pocket Blowguns

Compact enough to carry with you, these guns have a built-in quick-disconnect hose coupling for easy connection to an air line.

Blowguns with Air Hose

Connect the included hose to your air supply and these blowguns are ready to use.

Dual Air-Inlet Blowguns

Two inlets allow connection to air lines above or below. Use the top inlet when the blowgun is suspended from an overhead hose and the bottom inlet for bench and floor hoses.

Inline Blowguns

Operate a blowgun without disconnecting your air tool—these guns fit between the tool and air hose. Good for blowing away debris after using an air-powered sander or grinder.

Extended-Reach Blowguns

The extra length lets you access hard-to-reach areas.

Extended-Reach Blowguns with Air Hose

The included hose is ready to connect to your air supply.

Plastic-Body Extended-Reach Blowguns

The lightweight plastic body is more comfortable to hold than metal.

Extended-Reach Blowguns with Nonmarring Tip

These guns include a rubber tip that won't damage your workpiece.

Chip-Guard Extended-Reach Blowguns

Also known as air-shield and safety-shield blowguns, an outer air curtain deflects flying chips and dust while the center airstream blows away debris.

Low-Noise Extended-Reach Blowguns

Designed to reduce noise, these blowguns are quieter than similar standard guns.

Adjustable-Length Blowguns

Increase your reach with the telescoping nozzle.

Extended-Reach High-Airflow Blowguns

The extra length lets you access hard-to-reach areas.

Plastic-Body High-Airflow Blowguns

Maximize comfort and minimize strain with these lightweight guns.

High-Airflow Blowguns

These blowguns provide more than two times the airflow of standard guns.

90° Airflow Blowguns

Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.

Wide-Airflow Blowguns

The flat nozzle distributes air over a wide area.

Compressed-Air Blowguns for Large Areas

The most powerful blowguns we sell, these use compressed air to clean and blow debris.

Reverse-Airflow Blowguns

Blow air backward from the nozzle to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

Clean-Air Blowguns

Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.

Blow-and-Spray Blowguns

Also known as siphon guns, these spray air and liquids at the same time. Push the lever and the airflow creates suction that draws water, cleaning solution, or other liquids through the hose.

High-Airflow Static-Eliminating Blowguns

These guns provide more than three times the airflow of standard static-eliminating blowguns.

Static-Eliminating Blowguns

Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).

Hands-Free Static-Eliminating Blowguns

Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.

Electrical-Insulating Blowguns

A nonconductive plastic nozzle and tip protect against accidental contact with live electrical circuits. These blowguns are tested to 1,000 volts to meet IEC 60900.

Air-Powered Tube Cleaners

Launch foam cylinders through hose and tubing to power away dirt and deposits. Unlike cleaners with brushes, these work on flexible, curved, and coiled tubing as well as those with fittings, valves, and 90° bends.

Heat Guns

Flat-Tip Heat Gun Nozzles

Create a wide airflow that’s good for drying and stripping paint.

Deflecting Flat-Tip Heat Gun Nozzles

A deflector protects adjacent areas from heating. The flat shape creates a wide airflow.

Heat Gun Nozzle Sets

Sets include a focused nozzle for concentrated airflow, a flat-tip nozzle for heating wide surfaces, and a deflecting nozzle that protects adjacent surfaces from heating.

Focused-Tip Heat Gun Nozzles

Concentrate a heat gun's airflow.

Curved-Tip Heat Gun Nozzles

Shaped to hold round objects, use these nozzles for installing heat-shrink tubing and bending plastic pipe.

Plastic-Welding Heat Gun Nozzles

Insert plastic welding rod through a second opening in the nozzle. It directs air to heat the rod and weld plastic.

Safety Shields for Heat Gun Nozzles

Prevent accidental contact with hot nozzles.