Keep electronics inside enclosures from overheating by converting compressed air into a stream of cold air.

Often used in low-noise environments such as labs and clean rooms, these are quieter than standard enclosure-cooling vortex tubes.

Cool electronics inside enclosures while keeping out rain, snow, splashing water, and dirt.

Cool electronics inside enclosures to your desired temperature while keeping out rain, snow, splashing water, and dirt.

Set the thermostat and these vortex tubes switch on only when needed.

UL classified for hazardous locations, these vortex tubes convert compressed air into a stream of cold air to keep electronics within enclosures from overheating while also keeping dust and other contaminants out.

Protect equipment in enclosures and cabinets from overheating with chilled air.

Also known as Peltier coolers, these coolers use electrical current to transfer heat away from your enclosure while sealing out contaminants.

Produce twice as much cool air as standard mobile evaporative air coolers.

Choose these air conditioners for temporary spot cooling.

Mount these air conditioners in a window.

Built to withstand harsh environments, these air conditioners meet ANSI/ISA 12.12.01 and NEC Class I, Division 2, Groups A, B, C, and D ratings for hazardous locations.

Vortex tubes convert compressed air into a stream of cold air.

Tablets gradually dissolve, preventing deposits from developing on the pan.

Each comb fits two different fin spacings.

Remove moisture and contaminants from your system to prevent corrosion and maintain efficient operation.

Monitor refrigerant pressure on an LCD when servicing air conditioning systems.

Running on 48V DC power or lower, these compact fans fit inside electronics and other small, heat-sensitive equipment to keep things cool.

Safely cool electronics and equipment where explosive gases could be present due to equipment failure. ATEX certified, these fans meet European standards for hazardous locations.

These fans produce greater airflow than standard equipment-cooling fans.

Operate these fans with a DC power source.

Able to withstand submersion in up to 3 meters of water, these fans cool electronics in food processing areas and outdoors.

Cool down electronics in areas that require frequent and intense sanitizing. Rated IP69K, these AC-powered fans withstand harsh jets of water and block dust from reaching their motor.

Kits include a fan, guard, and power cord. They keep heat-sensitive equipment such as electronic components cool.

With the addition of a thermostat, the fans in these kits switch on only when needed.

Also known as crossflow blowers, these create a wider stream of air than other equipment-cooling blowers.

These fans meet U.S. Navy specification MIL-DTL-68.

Generate at least 25% greater airflow than economy and premium fans.

Position these fans near meeting areas to circulate air without drowning out voices.

Often used on loading docks, these fans have a pivoting extension arm and tilting fan head so you can direct air where it's needed as well as move it out of the way when it's not.

Generate at least 25% greater airflow than economy and premium fans.

Wheel these mobile fans wherever you need them. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

With a ball-bearing motor and cupped fan blades, these fans last longer and focus airflow better than economy fans.

Cool down areas where you don't have an outlet—these fans are lightweight and battery-powered so you can tote them anywhere.

A bright yellow guard makes these fans easy to spot.

Position these fans near meeting areas to circulate air without drowning out voices.

Wheels make it easy to move these fans.

Generate at least 25% greater airflow than standard office pedestal fans.

Draw fresh air in or push stale air out of your windows. Reverse airflow with the flip of a switch.

Keep cool with these personal-size wall-mount fans.

Mount these fans on a bench top or in a vehicle.

You can mount these fans on beams and walls.

Often used in welding shops and oil refineries, the motor in these fans is rated as safe for use around flammable and combustible gas, vapor, and dust.

Use these fans to draw stagnant and humid air out of a room.

Aim a stream of air at hot spots and equipment inside your enclosure to prevent overheating.

Operate these fans with a DC power source.

Expandable fan trays come with three fans but can hold up to nine for greater airflow.

To quickly dry flat surfaces, these fans direct air downward.

These aftercoolers have a fan that chills hot air coming from a compressor. Cooling the air condenses water for removal from your compressed air system.

Cool air through refrigeration to condense water vapor.

With a clear polycarbonate bowl that’s visible from all angles and silica gel desiccant that changes from blue to pink, it’s easy to see when it’s time to change the cartridge on these dryer/filters and dryer/filter/regulators.

These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

Spray on to clean without rinsing.

Stacked, corrugated plates maximize contact with liquid or steam flowing through these brazed plate heat exchangers for faster heat transfer than shell and tube heat exchangers.

Use hose to charge and test your air conditioning units.

Quickly heat or cool beverages and condiments using these heat exchangers, which have a sanitary design certified by 3-A.

Also known as shell and tube heat exchangers, these transfer heat using liquid or steam that flows through the shell to heat or cool liquid in the tubes.