Housing Material Housing Material |
|---|
|
Air Consumption @ Maximum Vacuum Air Consumption @Maximum Vacuum |
|---|
|
For Surface Type For Surface Type |
|---|
 |  |
| Flat | Angled |
 | |
| Varied Height |
Liquid Suction Flow Rate @ 5 ft. of Lift Liquid Suction FlowRate @ 5 ft. of Lift |
|---|
|
|
Liquid Suction Flow Rate @ 10 ft. of Lift Liquid Suction FlowRate @ 10 ft. of Lift |
|---|
|
|
Air-Powered Create-a-Vacuum Fittings
Connect these fittings to a vacuum cup and compressed air source to create a vacuum-generating system. They are also known as venturi devices.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Overall | Air Connection | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Size | Air Consumption @ Max. Vacuum | Ht. | Wd. | Material | Pipe Size | Thread Type | Gender | Each | |
BSPP Female | ||||||||||
| 1/8 | __ | 0.42 scfm @ 26.5 in. of Hg | 1 3/8" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 000000 | 000000 |
| 1/8 | __ | 0.74 scfm @ 26.5 in. of Hg | 1 3/8" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 000000 | 00000 |
| 1/8 | __ | 1.26 scfm @ 26.5 in. of Hg | 1 3/8" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 000000 | 00000 |
| 1/4 | __ | 0.42 scfm @ 26.5 in. of Hg | 1 3/8" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 000000 | 00000 |
| 1/4 | __ | 0.74 scfm @ 26.5 in. of Hg | 1 3/8" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 000000 | 00000 |
| 1/4 | __ | 1.26 scfm @ 26.5 in. of Hg | 1 3/8" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 000000 | 00000 |
BSPP Male | ||||||||||
| 1/8 | __ | 0.42 scfm @ 26.5 in. of Hg | 1 7/8" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 0000000 | 00000 |
| 1/8 | __ | 0.74 scfm @ 26.5 in. of Hg | 1 7/8" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 0000000 | 00000 |
| 1/8 | __ | 1.26 scfm @ 26.5 in. of Hg | 1 7/8" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 0000000 | 00000 |
| 1/4 | __ | 0.42 scfm @ 26.5 in. of Hg | 2 1/8" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 0000000 | 00000 |
| 1/4 | __ | 0.74 scfm @ 26.5 in. of Hg | 2 1/8" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 0000000 | 00000 |
| 1/4 | __ | 1.26 scfm @ 26.5 in. of Hg | 2 1/8" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 0000000 | 00000 |
| 1/4 | __ | 1.55 scfm @ 26.5 in. of Hg | 2 1/8" | 1 5/8" | Aluminum | 1/4 | BSPP | Female | 0000000 | 00000 |
| 1/4 | __ | 2.37 scfm @ 26.5 in. of Hg | 2 1/8" | 1 7/8" | Aluminum | 1/4 | BSPP | Female | 0000000 | 00000 |
| 1/4 | __ | 3.81 scfm @ 26.5 in. of Hg | 2 1/8" | 2" | Aluminum | 1/4 | BSPP | Female | 0000000 | 00000 |
Metric Female | ||||||||||
| __ | M6 | 0.42 scfm @ 26.5 in. of Hg | 1 1/4" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 0000000 | 00000 |
| __ | M6 | 0.74 scfm @ 26.5 in. of Hg | 1 1/4" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 0000000 | 00000 |
| __ | M6 | 1.26 scfm @ 26.5 in. of Hg | 1 1/4" | 1 1/4" | Aluminum | 1/4 | BSPP | Female | 0000000 | 00000 |
Metric Male | ||||||||||
| __ | M10 | 1.55 scfm @ 26.5 in. of Hg | 1 7/8" | 1 5/8" | Aluminum | 1/4 | BSPP | Female | 0000000 | 000000 |
| __ | M10 | 2.37 scfm @ 26.5 in. of Hg | 1 7/8" | 1 7/8" | Aluminum | 1/4 | BSPP | Female | 0000000 | 000000 |
| __ | M10 | 3.81 scfm @ 26.5 in. of Hg | 1 7/8" | 2" | Aluminum | 1/4 | BSPP | Female | 0000000 | 000000 |
Air-Powered Vacuum Lifters
These all-in-one lifters include a rubber vacuum cup and a device to generate suction without an installed vacuum system. Also known as venturi devices, they connect to any compressed air source.
Warning: Never use to lift people or items over people.
Lifters | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Air Connection | Temp., °F | Replacement Cups | |||||||||||||||
| Cap. @ Vacuum | Max. Vacuum | Air Consumption @ Pressure | For Surface Type | For Use With | Cup Color | Cup Dia. | Ht. | Wd. | Housing Material | Pipe Size | Thread Type | Gender | Min. | Max. | Each | Each | ||
Flat Cup—For Smooth Surfaces | ||||||||||||||||||
Polyurethane Rubber | ||||||||||||||||||
| 21 lbs. @ 27 in. of Hg | 27 in. of Hg | 1 scfm @ 45 psi | Flat | Sheet Metal, Plastic | Green | 1.97" | 2.11" | 4 3/8" | Aluminum | 1/8 | BSPP | Female | 50° | 120° | 0000000 | 0000000 | 0000000 | 000000 |
| 55 lbs. @ 27 in. of Hg | 27 in. of Hg | 1 scfm @ 45 psi | Flat | Sheet Metal, Plastic | Green and Yellow | 3.03" | 1 3/4" | 4 3/8" | Aluminum | 1/8 | BSPP | Female | 50° | 120° | 0000000 | 000000 | 0000000 | 00000 |
Single Bellows Cup—For Smooth and Textured Surfaces | ||||||||||||||||||
Polyurethane Rubber | ||||||||||||||||||
| 41 lbs. @ 27 in. of Hg | 27 in. of Hg | 1 scfm @ 45 psi | Flat, Angled, Varied Height | Sheet Metal, Plastic | Green and Yellow | 3.11" | 2.71" | 4 3/8" | Aluminum | 1/8 | BSPP | Female | 50° | 120° | 0000000 | 000000 | 0000000 | 00000 |
Electric Vacuum Lifters
Connect these lifters to an electrical source to create an airless lifter. An additional vacuum-cup port on the front of the lifter provides versatility when installing.
Warning: Never use to lift people or items over people.
Overall | Temp., °F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. @ Vacuum | Max. Vacuum | For Surface Type | For Use With | Cup Color | Cup Dia. | Ht. | Wd. | Lg. | Housing Material | Voltage | Current, A | Electrical Connection Type | Min. | Max. | Each | |
Single Bellows Cup—For Smooth Surfaces | ||||||||||||||||
Buna-N Rubber | ||||||||||||||||
| 0.54 lbs. @ 24 in. of Hg | 5 in. of Hg | Flat, Angled | Plastic, Sheet Metal | Black | 0.45" | 1 3/4" | 2" | 1 3/4" | Aluminum, Plastic | 12V DC | 0.5 | Hardwire | Not Rated | 120° | 0000000 | 0000000 |
| Replacement Cup | 00000000 | Each | 00000 |
Steam-Powered Jet Pumps
Use plant steam to pump liquids and gases, prime pumps, and remove fumes. When high-pressure steam enters the intake, it creates suction that draws a second liquid or gas into the pump body and discharges a pressurized blend of the two. The discharge pressure is greater than the suction flow but lower than the intake pressure. Gas suction flow is calculated using steam at atmospheric pressure. They have no moving parts or seals, eliminating downtime for lubrication and repairs. They're also known as eductors, ejectors, and injectors.
Note: Liquid suction flow rate is calculated using 80 psi steam at 0-40 feet of discharge head.
Bronze is more corrosion resistant than cast iron.
316 stainless steel pumps provide the most corrosion resistance.
Liquid Suction Flow Rate, gpm | Gas Suction Flow, cfm | Intake Pressure, psi | Suction | Intake | Discharge | Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| @ 5 ft. of Lift | 10 ft. of Lift | @ 20 ft. of Lift | @ 20 psi Steam | @ 50 psi Steam | @ 80 psi Steam | Max. Suction Lift, ft. | For Liquids | For Gases | Temp. Range, °F | Pipe Size | Thread Type | Pipe Size | Thread Type | Pipe Size | Thread Type | Lg. | Wd. | Each | |
For Use With Air, Inert Gas, Steam, Water | |||||||||||||||||||
Cast Iron | |||||||||||||||||||
| 6 | 5 | 3 | 5 | 4 | 3 | 20 | 35-150 | 20-80 | -20° to 150° | 1/2 | NPT | 3/8 | NPT | 1/2 | NPT | 4 1/2" | 1 1/8" | 0000000 | 0000000 |
| 10 | 9 | 5 | 8 | 6 | 6 | 20 | 35-150 | 20-80 | -20° to 150° | 3/4 | NPT | 1/2 | NPT | 3/4 | NPT | 5 7/8" | 1 1/4" | 0000000 | 000000 |
| 17 | 15 | 9 | 14 | 11 | 10 | 20 | 35-150 | 20-80 | -20° to 150° | 1 | NPT | 3/4 | NPT | 1 | NPT | 7 1/8" | 1 3/4" | 0000000 | 000000 |
| 31 | 27 | 15 | 24 | 20 | 17 | 20 | 35-150 | 20-80 | -20° to 150° | 1 1/4 | NPT | 1 | NPT | 1 1/4 | NPT | 9" | 2 3/8" | 0000000 | 000000 |
| 51 | 44 | 25 | 40 | 32 | 28 | 20 | 35-150 | 20-80 | -20° to 150° | 1 1/2 | NPT | 1 | NPT | 1 1/2 | NPT | 11" | 2 5/8" | 0000000 | 000000 |
| 93 | 80 | 46 | 73 | 58 | 51 | 20 | 35-150 | 20-80 | -20° to 150° | 2 | NPT | 1 1/4 | NPT | 2 | NPT | 14 3/8" | 3 1/2" | 0000000 | 000000 |
Bronze | |||||||||||||||||||
| 6 | 5 | 3 | 5 | 4 | 3 | 20 | 35-150 | 20-80 | -20° to 150° | 1/2 | NPT | 3/8 | NPT | 1/2 | NPT | 4 1/2" | 1 1/8" | 0000000 | 000000 |
| 10 | 9 | 5 | 8 | 6 | 6 | 20 | 35-150 | 20-80 | -20° to 150° | 3/4 | NPT | 1/2 | NPT | 3/4 | NPT | 5 7/8" | 1 1/4" | 0000000 | 000000 |
| 17 | 15 | 9 | 14 | 11 | 10 | 20 | 35-150 | 20-80 | -20° to 150° | 1 | NPT | 3/4 | NPT | 1 | NPT | 7 1/8" | 1 3/4" | 0000000 | 000000 |
| 31 | 27 | 15 | 24 | 20 | 17 | 20 | 35-150 | 20-80 | -20° to 150° | 1 1/4 | NPT | 1 | NPT | 1 1/4 | NPT | 9" | 2 3/8" | 0000000 | 000000 |
| 51 | 44 | 25 | 40 | 32 | 28 | 20 | 35-150 | 20-80 | -20° to 150° | 1 1/2 | NPT | 1 | NPT | 1 1/2 | NPT | 11" | 2 5/8" | 0000000 | 000000 |
| 93 | 80 | 46 | 73 | 58 | 51 | 20 | 35-150 | 20-80 | -20° to 150° | 2 | NPT | 1 1/4 | NPT | 2 | NPT | 14 3/8" | 3 1/2" | 0000000 | 000000 |
316 Stainless Steel | |||||||||||||||||||
| 6 | 5 | 3 | 5 | 4 | 3 | 20 | 35-150 | 20-80 | -150° to 150° | 1/2 | NPT | 3/8 | NPT | 1/2 | NPT | 4 1/2" | 1 1/8" | 0000000 | 000000 |
| 10 | 9 | 5 | 8 | 6 | 6 | 20 | 35-150 | 20-80 | -150° to 150° | 3/4 | NPT | 1/2 | NPT | 3/4 | NPT | 5 7/8" | 1 1/4" | 0000000 | 000000 |
| 17 | 15 | 9 | 14 | 11 | 10 | 20 | 35-150 | 20-80 | -150° to 150° | 1 | NPT | 3/4 | NPT | 1 | NPT | 7 1/8" | 1 3/4" | 0000000 | 000000 |
| 31 | 27 | 15 | 24 | 20 | 17 | 20 | 35-150 | 20-80 | -150° to 150° | 1 1/4 | NPT | 1 | NPT | 1 1/4 | NPT | 9" | 2 3/8" | 0000000 | 000000 |
| 51 | 44 | 25 | 40 | 32 | 28 | 20 | 35-150 | 20-80 | -150° to 150° | 1 1/2 | NPT | 1 | NPT | 1 1/2 | NPT | 11" | 2 5/8" | 0000000 | 000000 |
| 93 | 80 | 46 | 73 | 58 | 51 | 20 | 35-150 | 20-80 | -150° to 150° | 2 | NPT | 1 1/4 | NPT | 2 | NPT | 14 3/8" | 3 1/2" | 0000000 | 00000000 |