An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

No need for thread adapters—these filter/regulator/lubricators have an NPT inlet and a BSPP outlet.

Connect SMC modular filter/regulator/lubricator components with the same series number.

Connect Norgren modular filter/regulator/lubricator components with the same series number.

Connect Parker modular filter/regulator/lubricator components with the same series number.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

Mount these filter/regulators to a 35 mm DIN rail with the included brackets. The filter and regulator are joined top-to-bottom, so they fit in the same space as a filter alone.

Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.

Swap out Norgren modular filter/regulator/lubricator components without unthreading your air line connections.

Swap out ARO modular filter/regulator/lubricator components without unthreading your air line connections.

Swap out Festo modular filter/regulator/lubricator components without unthreading your air line connections.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Distribute compressed air to multiple locations from a single source.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air. Joiner clamps connect these air filters into your Parker setup.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.

Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.

Discharge up to 300 gallons of water and particles per hour—these filters handle compressed air that’s high in moisture content.

Quickly install these filters on your air line—no pipe nipples or joiner clamps required. Their push-to-connect fittings create tight seals around tubing.

Made of corrosion-resistant material, these filters withstand harsh environments where standard filters can break down and fail.

Replace a damaged bowl, or change the bowl material or drain type on your SMC modular compressed air filter.

Replace a damaged bowl, or change the bowl material or drain type on your Wilkerson modular compressed air filter.

Replace a damaged bowl or change the bowl material or drain type on your ARO modular compressed air filter.

Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your ARO modular compressed air filter to trap solid particles and water droplets.

Replace the filter element in your Wilkerson modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your Aventics modular compressed air filter to trap solid particles and water droplets.

Also known as coalescing filters, these filter elements fit into Parker modular compressed air filters to remove oil and fine particles.

Also known as coalescing filters, these filter elements fit in SMC modular compressed air filters to remove oil and particles.

Also known as coalescing filters, these filter elements fit in Norgren modular compressed air filters to remove oil and fine particles.

Replace failing or lost O-rings in SMC modular compressed air filters.

Replace failing or lost O-rings in Aventics modular compressed air filters.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment. Joiner clamps connect these air filters into your Norgren setup.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Use these filters to extend the service life of air-powered tools and equipment and then throw them away when you're done.

Mount these filters to a 35 mm DIN rail with the included brackets.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

Produce clean air for instrumentation and other applications, such as food or medical device manufacturing.

Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.

Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Replace a damaged bowl, or change the bowl material on your ARO modular compressed air lubricator.

Replace a damaged bowl on your Norgren modular compressed air lubricator.

Replace a damaged bowl, or change the bowl material on your Wilkerson modular compressed air lubricator.

Replace a cracked or lost sight dome on your Parker modular compressed air lubricator.

Replace a cracked or lost sight dome on your SMC modular compressed air lubricator.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air—joiner clamps connect these regulators into your ARO setup.

Adjust and maintain the pressure of your compressed air—joiner clamps connect these regulators into your Aventics setup.

Adjust and maintain the pressure of your compressed air.

A lower profile than our other compressed air regulators makes these regulators a better fit in tight spots.

An internal check valve permits reverse flow, so these regulators work with double-acting cylinders.

A pressure-calibrated dial on these regulators allows for easy adjustments to outlet pressure in high-flow applications.

Cleaned and double bagged in an ISO Class 3 and Fed. Spec. Class 1 clean room for protection from contamination, these regulators are suitable for use in clean rooms.

Use these regulators to adjust and maintain the pressure of your tubing air lines.