Attach to your blowgun to direct airflow.

Also known as air-shield and safety-shield nozzles, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

The extra length allows access into hard-to-reach areas.

These needle-style nozzles force air to a precise pinpoint.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Adjust airflow to control consumption and noise.

Shaped to fit into extremely tight spaces, these nozzles can be used to remove parts from molds. Tap the wedge into position, attach the nozzle to a blowgun, and activate the airflow to release the part.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Choose a base, hose, and nozzle for a custom setup.

Attach one of these swivels to an air nozzle to direct air 30° left, right, up, and down.

These blowguns have a metal body.

The rubber tip won't damage parts.

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Two inlets allow connection to air lines above or below. Use the top inlet when the blowgun is suspended from an overhead hose and the bottom inlet for bench and floor hoses.

Connect the included hose to your air supply and these blowguns are ready to use.

Also known as air-shield and safety-shield blowguns, an outer air curtain deflects flying chips and dust while the center airstream blows away debris.

Designed to reduce noise, these blowguns are quieter than similar standard guns.

These blowguns provide more than two times the airflow of standard guns.

The extra length lets you access hard-to-reach areas.

Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.

Clear dust and debris, test air ducts for leaks, and dry large surfaces without needing a compressed air line.

Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.

A nonconductive plastic nozzle and tip protect against accidental contact with live electrical circuits. These blowguns are tested to 1,000 volts to meet IEC 60900.

Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).

Create a sheet of high-velocity air.

Producing the same airflow as standard air knives, these are quieter and use 18% less compressed air.

Also known as air wipes, these use a 360° airstream to blow off, dry, clean, and cool tubes, cables, extruded shapes, and hoses.

Attach to a blower for high-speed airflow at low pressure.

A deflector protects adjacent areas from heating. The flat shape creates a wide airflow.

Prevent accidental contact with hot nozzles.

Create a wide airflow that’s good for drying and stripping paint.

Attach these chucks to your air hose so you can connect the hose to Schrader valves.

Use as either a vacuum or a blower—change the airflow direction to switch functions. Use to clean up dirt, dust, metal chips, and glass.

For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.

These nozzles handle coolant pressure up to 150 psi.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.

UL classified for hazardous locations, these vortex tubes convert compressed air into a stream of cold air to keep electronics within enclosures from overheating while also keeping dust and other contaminants out.

In addition to being quieter than standard enclosure-cooling vortex tubes, these stand up to washdowns and weather. They convert compressed air into a stream of cold air to keep electronics within enclosures from overheating while also keeping dust and other contaminants out.

Quietly cool electronics inside enclosures to your desired temperature while keeping out rain, snow, splashing water, and dirt.

These NEMA-rated vortex tube are designed to keep water out during washdowns.

Cool electronics inside enclosures to your desired temperature while keeping out rain, snow, splashing water, and dirt.