These blowguns have a metal body.

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Compact enough to carry with you, these guns have a built-in quick-disconnect hose coupling for easy connection to an air line.

Two inlets allow connection to air lines above or below. Use the top inlet when the blowgun is suspended from an overhead hose and the bottom inlet for bench and floor hoses.

Connect the included hose to your air supply and these blowguns are ready to use.

The included hose is ready to connect to your air supply.

Designed to reduce noise, these blowguns are quieter than similar standard guns.

These guns include a rubber tip that won't damage your workpiece.

Maximize comfort and minimize strain with these lightweight guns.

The extra length lets you access hard-to-reach areas.

Blow air backward from the nozzle to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

Clear dust and debris, test air ducts for leaks, and dry large surfaces without needing a compressed air line.

Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.

A nonconductive plastic nozzle and tip protect against accidental contact with live electrical circuits. These blowguns are tested to 1,000 volts to meet IEC 60900.

Safely blow dust and debris off your clothes. These blowers are a safer alternative to compressed air and help you meet OSHA regulations.

These guns provide more than three times the airflow of standard static-eliminating blowguns.

Also known as air-shield and safety-shield nozzles, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Control consumption and noise by adjusting the airflow.

Attach to your blowgun to direct airflow.

Extend these telescoping nozzles to increase your reach.

These nozzles are made of FDA-listed materials.

Air blows out of these flat nozzles in a wide pattern at a 90° angle from the inlet, distributing air over a wider area than focused-airflow nozzles. They’re FDA compliant 21 CFR 110.40 for use in the food industry.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

These needle-style nozzles force air to a precise pinpoint.

As compressed air flows through these nozzles, they rotate to efficiently and evenly blow off large areas.

The magnetic base mounts to your work surface and has a control valve for adjusting airflow.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Shaped to fit into extremely tight spaces, these nozzles can be used to remove parts from molds. Tap the wedge into position, attach the nozzle to a blowgun, and activate the airflow to release the part.

Turn your blowgun into a scraper to remove and blow away debris at the same time.

Clean parts with compressed air without propelling fluids and debris all over your shop. These vacuum/blowers quickly blow coolant, oil, and chips off your parts while a vacuum sucks them into a removable drum for recycling or disposing of them.

Clean without the hassle of a cord.

The flexible hose provides access to blind holes in tanks, bins, and barrels.

Use as either a vacuum or a blower—change the airflow direction to switch functions. Use to clean up dirt, dust, metal chips, and glass.

This vacuum/blower is for light cleaning and has a capacity of a 1/2 quart.