About Plastic and Rubber Tubing
More
Hard Plastic Tubing for Air and Water
This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.
Nylon tubing can handle lower temperatures than polypropylene tubing and can withstand higher pressures. It has slightly softer walls than polypropylene tubing, making it more flexible and impact absorbent.
Opaque tubing doesn’t allow you to see what’s flowing through the line. Semi-clear tubing gives you a limited view inside the line.
For technical drawings and 3-D models, click on a part number.
- Semi-Flexible
- Compatible with Compression and Push to Connect Tube Fittings
- Hard (Rockwell R78)
- Temperature Range: -60° to 200° F
| ID | OD | Wall Thick. | Bend Radius | Max. Pressure | Max. Vacuum | Lengths, ft. | Per Ft. | |
Inch | ||||||||
|---|---|---|---|---|---|---|---|---|
Black | ||||||||
| 11/64" | 1/4" | 3/64" | 3/4" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 00000 | |
Blue | ||||||||
| 11/64" | 1/4" | 3/64" | 3/4" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 000 | |
Green | ||||||||
| 11/64" | 1/4" | 3/64" | 3/4" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 000 | |
Red | ||||||||
| 11/64" | 1/4" | 3/64" | 3/4" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 000 | |
Yellow | ||||||||
| 11/64" | 1/4" | 3/64" | 3/4" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 000 | |
- Semi-Flexible
- Compatible with Compression and Push to Connect Tube Fittings
- Hard (Rockwell R78)
- Temperature Range: -60° to 200° F
- Semi-Flexible
- Compatible with Compression and Push to Connect Tube Fittings
- Hard (Rockwell R93)
- Temperature Range: 40° to 200° F
Hard Plastic Tubing for Vehicle Air Systems
- Semi-Flexible
- Compatible with Compression and Push to Connect Tube Fittings
- Hard (Durometer 65D)
- Temperature Range: -40° to 200° F
Safely power seat controls, horns, and other vehicle parts with compressed air. This tubing meets SAE or D.O.T. testing and performance standards for use in air-powered vehicle systems. It’s opaque, so you can’t see what’s flowing through the line. Semi-flexible, it’s good for gradual bends.
Tubing that meets D.O.T. FMVSS 106 is rated for use in motor vehicle brake systems. It’s also known as air brake tubing.
For technical drawings and 3-D models, click on a part number.
Flame-Retardant Hard Plastic Tubing for Air and Water
This tubing is self-extinguishing to delay the spread of flames to valuable equipment. Tubing is opaque, so you cannot see what’s flowing through the line. It is semi-flexible, so it is good for gradual bends.
Nylon tubing can withstand higher pressures than polyethylene tubing. It meets UL 94 V-0 for better flame retardance than polyethylene tubing, and is best suited for spot-welding or other applications where sparks can occur.
Polyethylene tubing can handle a wider temperature range than nylon tubing. It meets UL 94 V-2 for flame retardance and UL 1820 specifications and testing requirements for flame propagation and smoke density. It is designed for use in air control systems.
Tubing with stripe allows you to color-code your lines for easy identification.
For technical drawings and 3-D models, click on a part number.
- Semi-Flexible
- Compatible with Push to Connect Tube Fittings
- Hard (Durometer 50D)
- Temperature Range: 32° to 140° F
- Specifications Met: UL 94 V-0
Black with
White Stripe
Black with
Green Stripe
with Orange
Stripe
Black with
Purple Stripe
Black with
Yellow Stripe
Black with
Blue Stripe
- Semi-Flexible
- Compatible with Push to Connect Tube Fittings
- Hard
- Temperature Range: -70° to 175° F
- Specifications Met: UL 1820, UL 94 V-2
Self-Retracting Hard Plastic Tubing for Air and Water
- Semi-Flexible
- Compatible with Barbed and Push to Connect Tube Fittings
- Hardness:
Inch: Hard (Rockwell R80)
Metric: Hard (Rockwell R75) - Temperature Range: -40° to 180° F
Keep your work area tidy with this coiled tubing that extends when you need it and retracts out of the way when you don’t. Tubing is made of tough and abrasion-resistant nylon. It is semi-flexible, so it is good for gradual bends.
Semi-clear tubing gives you a limited view inside the line. Opaque tubing doesn’t allow you to see what’s flowing through the line.
Note: Length refers to the length you can extend the tubing. Overstretching can cause the tubing to lose its ability to fully retract back to its normal state. Retracted length refers to the length of the tubing when coiled.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Wall Thick. | Coil OD | Lg. | Retracted Lg. | Max. Pressure | Max. Vacuum | Each | |
Nylon Plastic  | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Semi-Clear White | |||||||||
| 11/64" | 1/4" | 3/64" | 1 3/4" | 4 ft. | 6" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 000000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 5 1/2 ft. | 9" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 7 1/2 ft. | 12" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 15 1/2 ft. | 25" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 22 1/2 ft. | 36" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
Opaque Black | |||||||||
| 11/64" | 1/4" | 3/64" | 1 3/4" | 4 ft. | 6" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 5 1/2 ft. | 9" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 7 1/2 ft. | 12" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 15 1/2 ft. | 25" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 22 1/2 ft. | 36" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
Opaque Blue | |||||||||
| 11/64" | 1/4" | 3/64" | 1 3/4" | 4 ft. | 6" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 5 1/2 ft. | 9" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 7 1/2 ft. | 12" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 15 1/2 ft. | 25" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 22 1/2 ft. | 36" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
Opaque Green | |||||||||
| 11/64" | 1/4" | 3/64" | 1 3/4" | 4 ft. | 6" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 5 1/2 ft. | 9" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 7 1/2 ft. | 12" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 15 1/2 ft. | 25" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 22 1/2 ft. | 36" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
Opaque Orange | |||||||||
| 11/64" | 1/4" | 3/64" | 1 3/4" | 4 ft. | 6" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 5 1/2 ft. | 9" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 7 1/2 ft. | 12" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 15 1/2 ft. | 25" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 22 1/2 ft. | 36" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 00000 |
Opaque Red | |||||||||
| 11/64" | 1/4" | 3/64" | 1 3/4" | 4 ft. | 6" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 5 1/2 ft. | 9" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 7 1/2 ft. | 12" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 15 1/2 ft. | 25" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
| 11/64" | 1/4" | 3/64" | 1 3/4" | 22 1/2 ft. | 36" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
Crack-Resistant Hard Plastic Tubing for Air and Water
- Semi-Flexible
- Compatible with Compression Tube Fittings
- Hard (Durometer 65D)
Made of resilient polypropylene, this tubing won’t crack due to stress or impact. Tubing is semi-clear, so you get a limited view inside the line. It is semi-flexible, so it is good for gradual bends.
For technical drawings and 3-D models, click on a part number.
Moisture-Resistant Hard Plastic Tubing for Air and Water
- Rigid
- Compatible with Compression Tube Fittings
- Hard (Rockwell 120)
- Temperature Range: -20° to 180° F
Made of moisture-resistant acetal, this tubing won’t soften and lose strength, even in high-humidity environments. Tubing is opaque, so you cannot see what’s flowing through the line. It is rigid and will not bend.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Wall Thick. | Max. Pressure | Color | Lg., ft. | Each | |
Opaque Acetal Plastic | |||||||
|---|---|---|---|---|---|---|---|
| 11/64" | 1/4" | 3/64" | 260 psi @ 72° F | White | 5 | 000000 | 00000 |
Low-Temperature Firm Plastic Tubing for Air and Water
- Flexible
- Compatible with Compression Tube Fittings
- Firm (Durometer 90A)
- Temperature Range: -100° to 160° F
This EVA tubing maintains its flexibility, even when temperatures drop to -100° F. Tubing has excellent impact and crack resistance, and also resists grease and UV light. It is semi-clear, so you get a limited view of what’s flowing through the line. Tubing is flexible, so it bends easily around objects.
For technical drawings and 3-D models, click on a part number.