About Pressure Reductions for High-Temperature Braided Hose
More
About Hose
More
About Duct Hose
More
High-Temperature Air Hose
Also known as hot air blower hose, this hose stays flexible and strong as it transfers compressed air at temperatures above 300° F. It’s often used to pressurize storage tanks, where hot, compressed air can prevent dry bulk materials from clogging and sticking during unloading. If used in a grounded system, it has a steel wire that gives electrostatic buildup a path to escape. Along with synthetic fabric, this steel wire reinforces the hose, so it keeps its shape under pressure. Made of EPDM, this hose resists UV rays and ozone and can be used outdoors.
Food industry hose is FDA Compliant, so it's safe for use with dry food.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: -40° to 400° F
- Maximum Vacuum: 29" of Hg @ 72° F
- Material: EPDM Rubber
- Color: Black with Yellow Stripe
Per Ft. | |||||||
|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Max. Pressure | Max. Continuous Lg., ft. | 1-99 | 100-Up | |
| 4" | 4 5/8" | 16" | 100 psi @ 72° F | 100 | 0000000 | 000000 | 000000 |
- Temperature Range: -20° to 325° F
- Maximum Vacuum: 29" of Hg @ 72° F
- Material: EPDM Rubber
- Color: Red with White Stripe
Per Ft. | ||||||||
|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Max. Pressure | Specifications Met | Max. Continuous Lg., ft. | 1-99 | 100-Up | |
| 4" | 4 5/8" | 10" | 100 psi @ 72° F | FDA Compliant 21 CFR 177.2600 | 100 | 0000000 | 000000 | 000000 |
Extreme-Temperature Air and Steam Hose with Male Threaded Fittings
- Maximum Vacuum: 29" of Hg @ 72° F
- Temperature Range: -325° to 1,200° F
- Material: 316 Stainless Steel or 321 Stainless Steel
Braided stainless steel construction gives this hose moderate flexibility and makes it tough enough to handle extreme temperatures, as well as vibration.
Single-braided hose with 304 stainless steel NPT threaded fittings have a steel hex nut.
Extreme-Temperature Air and Steam Hose with Flanges
- Temperature Range:
316 Stainless Steel Hose: -325° to 1200° F
321 Stainless Steel Hose: -20° to 950° F - Maximum Vacuum: 29" of Hg @ 72° F
- Material: 316 Stainless Steel or 321 Stainless Steel
Braided stainless steel construction gives this hose moderate flexibility and makes it tough enough to handle extreme temperatures, as well as vibration. Bolt the flanged ends to pumps and tanks. You’ll need a gasket to seal the connection. Flanges that swivel until tightened are easy to align with bolt holes.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Flange OD | ID | OD | Bend Radius | Bolt Circle Dia. | No. of Bolt Holes | Max. Pressure | 12" | 18" | 24" | 30" | 36" | 42" | 48" | 60" | 72" | 96" | 120" | |
316 Stainless Steel Hose with 316 Stainless Steel Flanged Fittings | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 × 4 | 9" × 9" | 4" | 5 1/8" | 22" | 7 1/2" × 7 1/2" | 8 | 275 psi @ 72° F | 0000000 | |||||||||||
321 Stainless Steel Hose with Steel Flanged Fittings | |||||||||||||||||||
| 4 × 4 | 9" × 9" | 4" | 5 1/8" | 22" | 7 1/2" × 7 1/2" | 8 | 285 psi @ 72° F | 000000 | |||||||||||
| Pipe Size | Flange OD | ID | OD | Bend Radius | Bolt Circle Dia. | No. of Bolt Holes | Max. Pressure | 18" | 24" | 30" | 36" | 42" | 48" | 60" | 72" | 96" | 120" | |
316 Stainless Steel Hose with 316 Stainless Steel Flanged Fittings | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 × 4 | 9" × 9" | 4" | 5 1/8" | 22" | 7 1/2" × 7 1/2" | 8 | 275 psi @ 72° F | 0000000 | ||||||||||
321 Stainless Steel Hose with Steel Flanged Fittings | ||||||||||||||||||
| 4 × 4 | 9" × 9" | 4" | 5 1/8" | 22" | 7 1/2" × 7 1/2" | 8 | 285 psi @ 72° F | 0000000 | ||||||||||
High-Vacuum Hose with Claw-Clamp Fittings
More flexible than rigid stainless steel tubing, this hose allows you to link high-vacuum components that are misaligned. Also known as bellows. The ribbed design absorbs vibration so it doesn't transfer from one component to the next. Equipped with a claw-clamp (ISO-K) fitting on each end, this hose connects to large components with fittings starting at trade number 63. Each fitting on the hose requires four claw clamps and a ring (both sold separately) to connect. Not for use in pressure applications.
Double-claw clamps attach to the grooves on the fittings.
Single-claw clamps have a clamp on one end and an exposed bolt on the other. Thread the bolt-end directly into the body of pumps, valves, or other high-vacuum components.
- Temperature Range: Not Rated
- Material:
6" Lengths: 321 Stainless Steel
Other Lengths: 304 Stainless Steel - Fitting Material: 304 Stainless Steel
| For Tube OD | Flange OD | High-Vacuum Flange Size | ID | OD | Wall Thickness | Bend Radius | High Vacuum Connection Type | Max. Vacuum | Each | |
6" Lg. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 4" | 5.12" | 100 | 4" | 4 15/16" | 0.008" | 3 1/2" | ISO-K | 1 × 10 -9 torr @ 72° F | 0000000 | 0000000 |
12" Lg. | ||||||||||
| 4" | 5.12" | 100 | 4" | 4 13/16" | 0.008" | 8" | ISO-K | 1 × 10 -9 torr @ 72° F | 0000000 | 000000 |
24" Lg. | ||||||||||
| 4" | 5.12" | 100 | 4" | 4 13/16" | 0.008" | 8" | ISO-K | 1 × 10 -9 torr @ 72° F | 0000000 | 000000 |
36" Lg. | ||||||||||
| 4" | 5.12" | 100 | 4" | 4 13/16" | 0.008" | 8" | ISO-K | 1 × 10 -9 torr @ 72° F | 0000000 | 000000 |
39" Lg. | ||||||||||
| 4" | 5.12" | 100 | 4" | 4 13/16" | 0.008" | 8" | ISO-K | 1 × 10 -9 torr @ 72° F | 0000000 | 000000 |
| For Tube OD | For Flange OD | For High-Vacuum Flange Size | High Vacuum Connection Type | Material | Max. Vacuum | Each | |
Double Claw | |||||||
|---|---|---|---|---|---|---|---|
| 2 1/2", 3", 4" | 3.74", 4.33", 5.12" | 63, 80, 100 | ISO-K | Aluminum | 1 × 10 -9 torr @ 72° F | 0000000 | 00000 |
Single Claw | |||||||
| 2 1/2", 3", 4" | 3.74", 4.33", 5.12" | 63, 80, 100 | ISO-K | Aluminum | 1 × 10 -9 torr @ 72° F | 0000000 | 0000 |
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Tube OD | For Flange OD | For High-Vacuum Flange Size | High Vacuum Connection Type | O-Ring | Inner Ring | Max. Vacuum | Max. Temp., °F | Each | |
| 4" | 5.12" | 100 | ISO-K | Viton® Fluoroelastomer Rubber | 304 Stainless Steel | 1 × 10 -9 torr @ 72° F | 400° | 0000000 | 000000 |
Crush-Resistant Duct Hose for Air
- Flexible
- Compatible Clamps: Worm-Drive Clamps
- Color: Blue
- Temperature Range: -40° to 225° F
Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.
For technical drawings and 3-D models, click on a part number.
Spiral | Per Ft. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Compresses To | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Max. Continuous Lg., ft. | 1-49 | 50-Up | |
Polypropylene | ||||||||||||
| 4" | 4 3/8" | 5" | 45% | 5 psi @ 72° F | 0.011" | Ribbed | Left Hand | Plastic | 50 | 0000000 | 00000 | 00000 |
Heat-Reflective Duct Hose for Air
- Flexible
- Compatible Clamps: Worm-Drive and Quick-Release Clamps
- Color: Silver
- Temperature Range: -65° to 625° F
A metalized polyester cover reflects heat so the temperature inside the hose won't rise. Hose has a smooth interior for unrestricted flow.
Spiral | Per Ft. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Compresses To | Max. Vacuum | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Max. Continuous Lg., ft. | 1-11 | 12-Up | |
Fiberglass Hose with Metalized Polyester Cover | |||||||||||||
| 4" | 4 1/8" | 3" | 25% | 27 in. of Hg @ 72° F | 30 psi @ 72° F | 0.027" | Smooth | Right Hand | Metal | 12 | 0000000 | 000000 | 000000 |
Bend-and-Stay Metal Duct Hose for Air
- Very Flexible
- Compatible Clamps: Worm-Drive Clamps
- Temperature Range: -100° to 435° F
Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape. Hose is not for continuous flexing. The hose may need support.
| ID | OD | Bend Radius | Compresses To | Material Thick. | Interior Surface Texture | Lg., ft. | Each | |
Aluminum | ||||||||
|---|---|---|---|---|---|---|---|---|
| 4" | 4 1/16" | 6" | 30% | 0.005" | Ribbed | 8 | 00000000 | 000000 |
Quick-Attach Duct Hose with Wear Strip for Air
- Very Flexible
- Color: Yellow; Wear Strip is Black
- Temperature Range: -20° to 180° F
The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps. To connect hose, slip a duct hose connector into one end and cinch the belt for a secure hold. Hose has a wear strip that protects against damage caused by dragging. Hose meets UL 94 V-0 for flame retardance.
Blo-N-Vent Duct Hose with Wear Strip for Air
- Very Flexible
- Compatible Clamps: Worm-Drive Clamps
- Color: Yellow; Wear Strip is Black
- Temperature Range: -65° to 250° F
A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage. Hose meets UL 94 V-0 for flame retardance.
Hose with embedded wire ends has a wire rope sewn into each end that lets you connect lengths of hose without a duct hose connector or clamp. Squeeze the end on one hose and slip it into the opening of another.
Spiral | Per Ft. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Compresses To | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Specifications Met | 1-24 | 25-Up | |
Neoprene-Coated Polyester | ||||||||||||
| 4" | 4 5/16" | 3" | 20% | 5.4 psi @ 72° F | 0.013" | Ribbed | Right Hand | Metal | UL 94 V-0 | 0000000 | 000000 | 00000 |
Blo-N-Vent Duct Hose for Air
- Very Flexible
- Compatible Clamps: Worm-Drive Clamps
- Color: Yellow
- Temperature Range: -65° to 250° F
Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible. Hose meets UL 94 V-0 for flame retardance.
Spiral | Per Ft. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Compresses To | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Specifications Met | Max. Continuous Lg., ft. | 1-24 | 25-Up | |
Neoprene-Coated Polyester | |||||||||||||
| 4" | 4 5/16" | 3" | 20% | 5.4 psi @ 72° F | 0.013" | Ribbed | Right Hand | Metal | UL 94 V-0 | 25 | 0000000 | 00000 | 00000 |
Insulated Duct Hose for Indoor Air
- Very Flexible
- Compatible Clamps: Worm-Drive Clamps
- Color: Silver
- Temperature Range: -20° to 140° F
Insulated with a layer of fiberglass, this ultra-thin, lightweight hose keeps air at a constant temperature. Use scissors or a utility knife to cut the hose to length.
Spiral | Insulation | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Compresses To | Maximum Airflow, fpm | Material Thick. | Interior Surface Texture | Direction | Material | Material | R Value | Thick. | Specifications Met | Lg., ft. | Each | |
Fiberglass Hose with Silver Metalized Film Cover | |||||||||||||||
| 4" | 6" | 4" | 20% | 5,000 | 0.002" | Ribbed | Left Hand | Metal | Fiberglass | 4.2 | 1" | NFPA 90A, NFPA 90B, UL 181 Class 1 | 25 | 00000000 | 000000 |
High-Temperature Duct Hose with Wear Strip for Air
- Very Flexible
- Compatible Clamps: Worm-Drive Clamps
- Color: Yellow; Wear Strip is Black
- Temperature Range: -20° to 325° F
An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose. Hose meets UL 94 V-0 for flame retardance. It has a wear strip that protects against damage caused by dragging.
Spiral | Per Ft. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Compresses To | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Specifications Met | Max. Continuous Lg., ft. | 1-24 | 25-Up | |
Acrylic-Coated Polyester | |||||||||||||
| 4" | 4 5/16" | 2 1/2" | 15% | 4 psi @ 72° F | 0.018" | Ribbed | Right Hand | Metal | UL 94 V-0 | 25 | 0000000 | 000000 | 00000 |
Insulated Blo-N-Vent Duct Hose with Wear Strip for Air
- Very Flexible
- Compatible Clamps: Worm-Drive and Quick-Release Clamps
- Color: Yellow; Wear Strip is Black
- Temperature Range: -40° to 250° F
A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments. Hose has a wear strip that protects against damage caused by dragging. The liner meets UL 94 V-0 for flame retardance. The ends are cuffed for easy attachment to duct hose connectors.
Easy-Store Duct Hose for Air
- Very Flexible
- Compatible Clamps: Worm-Drive Clamps
- Color: Silver
- Temperature Range: 0° to 200° F
The most compressible hose we offer, this duct hose collapses to 5% of its length for easy storage.
Spiral | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Compresses To | Material Thick. | Interior Surface Texture | Direction | Material | Specifications Met | Lg., ft. | Each | |
Polyester Hose with Metalized Film Cover | |||||||||||
| 4" | 4 3/8" | 4" | 5% | 0.001" | Ribbed | Left Hand | Metal | NFPA 90A, NFPA 90B, UL 181 Class 1 | 25 | 00000000 | 000000 |
Slide these connectors into the end of your hose and secure with a clamp to create longer lengths.
| For Hose ID | ID | OD | Lg. | Specifications Met | Each | |
Galvanized Steel | ||||||
|---|---|---|---|---|---|---|
| 4" | 3 31/32" | 4" | 5 3/8" | ASTM A653-07-CS Type B | 00000000 | 00000 |
Slide these connectors into the end of your hose and secure with a clamp to create longer lengths.
Insulated Bend-and-Stay Metal Duct Hose for Air
- Very Flexible
- Compatible Clamps: Worm-Drive Clamps
- Color: Silver
- Temperature Range: -100° to 435° F
Bend this hose into position in heating and cooling applications where it’s important to maintain the temperature of the air inside the hose. Unlike fabric duct hose, this lightweight aluminum hose holds its shape once it’s curved around corners. It’s insulated with a layer of fiberglass, so it keeps air flowing through at a consistent temperature even when it’s routed through hot or cold spaces. The metalized film cover seals out moisture, protecting the insulation underneath.
This hose is not meant to be continuously flexed. Lengths beyond 6 ft. may need support.
Spiral | Insulation | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Compresses To | Max. Airflow, fpm | Max. Vacuum | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Material | R Value | Thick. | Specifications Met | Lg., ft. | Each | |
Aluminum Hose with Metalized Film Cover | |||||||||||||||||
| 4" | 7 1/16" | 1 1/2" | 25% | 5,000 | 0.88 in. of Hg @ 72° F | 0.4 psi @ 72° F | 0.006" | Ribbed | Right Hand | Metal | Fiberglass | 4.2 | 1 1/2" | NFPA 90A/90B, UL 181 Class 1 | 8 | 0000000 | 000000 |