1 m Air Hose | McMaster-Carr

Keep your work area tidy with this coiled tubing that extends when you need it and retracts out of the way when you don’t. Tubing is made of tough and abrasion-resistant nylon. It is semi-flexible, so it is good for gradual bends.

Semi-clear tubing gives you a limited view inside the line. Opaque tubing doesn’t allow you to see what’s flowing through the line.

Note: Length refers to the length you can extend the tubing. Overstretching can cause the tubing to lose its ability to fully retract back to its normal state. Retracted length refers to the length of the tubing when coiled.

For technical drawings and 3-D models, click on a part number.

Nylon Plastic
ID	OD	Wall Thick.	Coil OD	Lg.	Retracted Lg.	Max. Pressure	Max. Vacuum		Each
Semi-Clear White
2.7mm	4mm	0.7mm	34mm	1 m	40mm	290 psi @ 72° F	28 in. of Hg @ 72° F	00000000	000000
4mm	6mm	1mm	76mm	1 m	30mm	300 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
6mm	8mm	1mm	93mm	1 m	32mm	220 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
8mm	10mm	1mm	122mm	1 m	30mm	160 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
Opaque Black
2.7mm	4mm	0.7mm	34mm	1 m	40mm	290 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
4mm	6mm	1mm	76mm	1 m	30mm	300 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
6mm	8mm	1mm	93mm	1 m	32mm	220 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
Opaque Blue
2.7mm	4mm	0.7mm	34mm	1 m	40mm	290 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
4mm	6mm	1mm	76mm	1 m	30mm	300 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
6mm	8mm	1mm	93mm	1 m	32mm	220 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
8mm	10mm	1mm	122mm	1 m	30mm	160 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
Opaque Green
6mm	8mm	1mm	93mm	1 m	32mm	220 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
Opaque Red
2.7mm	4mm	0.7mm	34mm	1 m	40mm	290 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
4mm	6mm	1mm	76mm	1 m	30mm	300 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
6mm	8mm	1mm	93mm	1 m	32mm	220 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000

Self-Retracting Firm Rubber Tubing for Air and Water

Clear Tubing

Opaque Tubing

Clear Blue

Opaque Black

Opaque Blue

Opaque Red

Flexible
Compatible with Barbed Tube Fittings
Firm (Durometer 95A)
Temperature Range: -40° to 120° F

Keep your worksite safe and clutter free—this coiled polyurethane rubber tubing extends when you need it and retracts out of the way when you don’t. The material is ether based, so you’ll get the abrasion and tear resistance you’d expect from polyurethane, along with the ability to use it in humid environments. Tubing is flexible and bends easily around objects. It comes in multiple colors, so you can color-code your lines.

Clear tubing allows you to easily monitor flow. It has a colored tint. Opaque tubing doesn’t allow you to see what’s flowing through the line.

For technical drawings and 3-D models, click on a part number.

Polyurethane Rubber
ID	OD	Wall Thick.	Coil OD	Lg.	Retracted Lg.	Max. Pressure	Max. Vacuum		Each
Clear Blue
1.8mm	3mm	0.6mm	19mm	1 m	51mm	185 psi @ 72° F	28 in. of Hg @ 72° F	00000000	000000
2.4mm	4mm	0.8mm	27mm	1 m	51mm	165 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
4mm	6mm	1mm	37mm	1 m	51mm	135 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
8mm	12mm	2mm	82mm	1 m	51mm	120 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
Opaque Black
2.4mm	4mm	0.8mm	27mm	1 m	51mm	165 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
4mm	6mm	1mm	37mm	1 m	51mm	135 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
5mm	8mm	1.5mm	48mm	1 m	51mm	160 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
6.5mm	10mm	1.8mm	65mm	1 m	51mm	135 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
Opaque Blue
2.4mm	4mm	0.8mm	27mm	1 m	51mm	165 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
4mm	6mm	1mm	37mm	1 m	51mm	135 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
5mm	8mm	1.5mm	48mm	1 m	51mm	160 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
6.5mm	10mm	1.8mm	65mm	1 m	51mm	135 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000
Opaque Red
5mm	8mm	1.5mm	48mm	1 m	51mm	160 psi @ 72° F	28 in. of Hg @ 72° F	00000000	00000

General Purpose Aluminum Tubing

Temperature Range: -450° to 400° F
Bending Method: Tube Bender
Compatible Tube Fittings: Flared

This tubing is lightweight with good corrosion resistance and weldability. It has magnesium and silicon added for strength. Tubing is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting.

For technical drawings and 3-D models, click on a part number.

Metric

For Use With Air, Diesel Fuel, Fuel Oil, Gasoline, Hydraulic Fluid, Water
OD, mm	Wall Thick., mm	ID, mm	Max. Pressure	Temper	Temper Rating		1 m
10	1.5	7	2,600 psi @ 72° F	T6	Hard	000000000	000000
12	2	8	2,900 psi @ 72° F	T6	Hard	000000000	000000
16	2	12	2,100 psi @ 72° F	T6	Hard	000000000	000000

Smooth-Bore Seamless Stainless Steel Tubing

Straight

Seamless construction with no weld bead gives this tubing an interior with unrestricted flow. It is stronger than welded tubing and can be flared without splitting.

304 stainless steel has very good corrosion resistance.

316 stainless steel offers excellent corrosion resistance.

Tubing that meets ASTM specifications adheres to international standards for dimensions and materials.

For technical drawings and 3-D models, click on a part number.

Metric Straights

Temperature Range: -325° to 1500° F
Bending Method: Tube Bender
For Use With: Hydraulic Fluid, Oil, Water, Natural Gas, Air
Compatible Tubing Fittings: see table

304 Stainless Steel
OD, mm	Wall Thick., mm	ID, mm	Max. Pressure	Temper Rating	Compatible Tube Fittings	Specifications Met		1 m
3	0.5	2	4,500 psi @ 72° F	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
4	1	2	6,800 psi @ 72° F	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	00000
6	1	4	4,500 psi @ 72° F	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	00000
8	1.5	5	5,100 psi @ 72° F	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	00000
10	1.5	7	4,100 psi @ 72° F	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
10	2	6	5,500 psi @ 72° F	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
12	2	8	4,500 psi @ 72° F	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
16	2	12	3,400 psi @ 72° F	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
18	1.5	15	2,250 psi @ 72° F	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
18	2	14	3,000 psi @ 72° F	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
25	1.5	22	1,650 psi @ 72° F	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
316 Stainless Steel
3	0.5	2	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	0000000	000000
3	1	1	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
4	1	2	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	0000000	000000
6	1	4	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	0000000	00000
6	1.5	3	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
8	1	6	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	00000
8	1.5	5	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	0000000	000000
10	1	8	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
10	1.5	7	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	00000
10	2	6	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	0000000	000000
12	1	10	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
12	1.5	9	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
12	2	8	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	0000000	000000
14	1.5	11	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	0000000	000000
16	1.5	13	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
16	2	12	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	DIN 17458	00000000	000000
18	1.5	15	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
18	2	14	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
20	2	16	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	DIN 17458	00000000	000000
25	1.5	22	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000
25	2	21	Not Rated	Soft	Butt Weld, Compression, Flared, Yor-Lok	ASTM A269	00000000	000000

Welded Stainless Steel Tubing

Straight

When your application does not require a smooth interior, this tubing is an economical choice. It has a weld bead on the inside.

304 stainless steel has very good corrosion resistance.

316 stainless steel offers excellent corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Metric Straights

Temperature Range: -420° to 600° F
Bending Method: Tube Bender

304 Stainless Steel—For Use With Air, Natural Gas, Oil, Water
OD, mm	Wall Thickness, mm	ID, mm	Maximum Pressure	Temper Rating		1 m
1	0.25	0.5	3,000 psi @ 72° F	Hard	00000000	000000
2	0.25	1.5	3,000 psi @ 72° F	Hard	00000000	00000
2	0.4	1.2	4,000 psi @ 72° F	Hard	00000000	00000
2	0.5	1	4,000 psi @ 72° F	Hard	00000000	00000
3	0.25	2.5	3,000 psi @ 72° F	Hard	00000000	00000
3	0.4	2.2	4,000 psi @ 72° F	Hard	00000000	00000
3	0.5	2	4,000 psi @ 72° F	Hard	00000000	00000
4	0.25	3.5	3,000 psi @ 72° F	Hard	00000000	00000
4	0.4	3.2	4,000 psi @ 72° F	Hard	00000000	00000
4	0.5	3	4,000 psi @ 72° F	Hard	00000000	00000
5	0.25	4.5	3,000 psi @ 72° F	Hard	00000000	00000
5	0.4	4.2	4,000 psi @ 72° F	Hard	00000000	00000
5	0.5	4	4,000 psi @ 72° F	Hard	00000000	00000
6	0.25	5.5	3,000 psi @ 72° F	Hard	00000000	00000
6	0.4	5.2	4,000 psi @ 72° F	Hard	00000000	00000
6	0.5	5	4,000 psi @ 72° F	Hard	00000000	00000
7	0.25	6.5	3,000 psi @ 72° F	Hard	00000000	00000
7	0.5	6	4,000 psi @ 72° F	Hard	00000000	00000
8	0.25	7.5	3,000 psi @ 72° F	Hard	00000000	00000
8	0.4	7.2	4,000 psi @ 72° F	Hard	00000000	00000
8	0.5	7	4,000 psi @ 72° F	Hard	00000000	00000
10	0.5	9	1,800 psi @ 72° F	Hard	00000000	000000
12	0.5	11	1,500 psi @ 72° F	Hard	00000000	000000
16	0.5	15	1,000 psi @ 72° F	Hard	00000000	000000
316 Stainless Steel—For Use With Air, Natural Gas, Oil, Water
1	0.25	0.5	3,000 psi @ 72° F	Hard	00000000	00000
2	0.25	1.5	3,000 psi @ 72° F	Hard	00000000	00000
2	0.4	1.2	4,000 psi @ 72° F	Hard	00000000	00000
2	0.5	1	4,000 psi @ 72° F	Hard	00000000	00000
3	0.25	2.5	3,000 psi @ 72° F	Hard	00000000	00000
3	0.4	2.2	4,000 psi @ 72° F	Hard	00000000	00000
3	0.5	2	4,000 psi @ 72° F	Hard	00000000	00000
4	0.25	3.5	3,000 psi @ 72° F	Hard	00000000	00000
4	0.4	3.2	4,000 psi @ 72° F	Hard	00000000	00000
4	0.5	3	4,000 psi @ 72° F	Hard	00000000	00000
5	0.25	4.5	3,000 psi @ 72° F	Hard	00000000	00000
5	0.4	4.2	4,000 psi @ 72° F	Hard	00000000	00000
5	0.5	4	4,000 psi @ 72° F	Hard	00000000	00000
6	0.25	5.5	3,000 psi @ 72° F	Hard	00000000	00000
6	0.4	5.2	4,000 psi @ 72° F	Hard	00000000	00000
6	0.5	5	4,000 psi @ 72° F	Hard	00000000	00000
7	0.25	6.5	3,000 psi @ 72° F	Hard	00000000	00000
7	0.5	6	4,000 psi @ 72° F	Hard	00000000	00000
8	0.25	7.5	3,000 psi @ 72° F	Hard	00000000	00000
8	0.4	7.2	4,000 psi @ 72° F	Hard	00000000	00000
8	0.5	7	4,000 psi @ 72° F	Hard	00000000	00000
10	0.5	9	1,800 psi @ 72° F	Hard	00000000	000000
12	0.5	11	1,500 psi @ 72° F	Hard	00000000	000000

General Purpose Copper Tubing

Straight

This tubing has good corrosion resistance and excellent heat transfer qualities. It is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting. All tubing meets international standards for copper tubing.

For technical drawings and 3-D models, click on a part number.

Metric Straights

Temperature Range: -20° to 400° F
Bendable: No
Specifications Met: ASTM B68, ASTM B75
Compatible Tube Fittings: Solder Connect

For Use With Air, Hydraulic Fluid, Oil, Water
OD, mm	Wall Thick., mm	ID, mm	Max. Pressure	Temper Rating		1 m
4	1	2	7,400 psi @ 72° F	Hard	00000000	000000
6	1	4	3,100 psi @ 72° F	Hard	0000000	00000
8	1	6	2,100 psi @ 72° F	Hard	0000000	00000
10	1	8	1,600 psi @ 72° F	Hard	0000000	00000
12	1	10	1,200 psi @ 72° F	Hard	0000000	00000
14	1	12	1,000 psi @ 72° F	Hard	0000000	00000
16	1	14	1,500 psi @ 72° F	Hard	00000000	00000
18	1	16	1,300 psi @ 72° F	Hard	00000000	000000
20	1	18	1,200 psi @ 72° F	Hard	00000000	000000

Brass Tubing

Frequently used in a wide range of plumbing applications, this tubing holds up well in mildly corrosive environments. Tubing is seamless, so it has a smooth interior for unrestricted flow.

For technical drawings and 3-D models, click on a part number.

Metric Straights

Temperature Range: -20° to 150° F
Compatible with Solder Connect Tube Fittings
Bendable: Yes

For Use With Air
OD, mm	Wall Thick., mm	ID, mm	Temper	Temper Rating		1 m
1	0.225	0.5	H02	1/2 Hard	0000000	00000
1.5	0.225	1	H02	1/2 Hard	0000000	0000
2	0.225	1.5	H02	1/2 Hard	0000000	0000
2	0.45	1	H02	1/2 Hard	0000000	0000
2.5	0.225	2	H02	1/2 Hard	0000000	0000
3	0.225	2.5	H02	1/2 Hard	0000000	0000
3	0.45	2	H02	1/2 Hard	0000000	0000
3.5	0.225	3	H02	1/2 Hard	0000000	0000
4	0.225	3.5	H02	1/2 Hard	0000000	0000
4	0.45	3	H02	1/2 Hard	0000000	00000
4.5	0.225	4	H02	1/2 Hard	0000000	0000
5	0.225	4.5	H02	1/2 Hard	0000000	0000
5	0.45	4	H02	1/2 Hard	0000000	00000
6	0.45	5	H02	1/2 Hard	0000000	00000
7	0.45	6	H02	1/2 Hard	0000000	00000
8	0.45	7	H02	1/2 Hard	0000000	00000
9	0.45	8	H02	1/2 Hard	0000000	00000
10	0.45	9	H02	1/2 Hard	0000000	00000
11	0.45	10	H02	1/2 Hard	0000000	00000
12	0.45	11	H02	1/2 Hard	0000000	00000
13	0.45	12	H02	1/2 Hard	0000000	00000

Smooth-Bore Seamless Steel Tubing

Seamless construction with no weld bead gives this tubing a smooth interior for unrestricted flow. It is stronger than welded tubing and can be flared without splitting. Do not use in corrosive environments.

For technical drawings and 3-D models, click on a part number.

Metric Straights

Temperature Range: See Table
Bending Method: Tube Bender
For Use With: Air, Hydraulic Fluid, Oil
Compatible Tubing Fittings: Compression

							1 m
OD, mm	Wall Thick., mm	ID, mm	Max. Pressure	Temperature Range, °F	Temper Rating	Specifications Met		Each
Steel
4	1	2	Not Rated	-5° to 570°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
6	1	4	5,600 psi @ 72° F	-5° to 570°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
8	1	6	4,200 psi @ 72° F	-5° to 570°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
8	2	4	8,500 psi @ 72° F	-5° to 570°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
10	1.5	7	5,400 psi @ 72° F	-5° to 570°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
12	1.5	9	4,500 psi @ 72° F	-5° to 570°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
14	2	10	5,100 psi @ 72° F	-5° to 570°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
15	1.5	12	3,600 psi @ 72° F	-5° to 570°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
16	2	12	4,500 psi @ 72° F	-5° to 570°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
16	3	10	6,700 psi @ 72° F	-5° to 570°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
18	2	14	4,000 psi @ 72° F	-5° to 570°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
20	2	16	3,600 psi @ 72° F	-5° to 570°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
25	2	21	2,800 psi @ 72° F	-5° to 570°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
Zinc-Plated Steel
4	1	2	7,200 psi @ 72° F	68° to 240°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
6	1	4	5,100 psi @ 72° F	68° to 240°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
8	1	6	3,800 psi @ 72° F	68° to 240°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
8	2.5	3	10,000 psi @ 72° F	68° to 240°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
10	1.5	7	4,600 psi @ 72° F	68° to 240°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
12	1.5	9	3,800 psi @ 72° F	68° to 240°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
14	2	10	4,400 psi @ 72° F	68° to 240°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
15	1.5	12	3,100 psi @ 72° F	68° to 240°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
16	2	12	3,800 psi @ 72° F	68° to 240°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
16	3	10	5,800 psi @ 72° F	68° to 240°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
18	2	14	3,200 psi @ 72° F	68° to 240°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
20	2	16	2,900 psi @ 72° F	68° to 240°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000
25	2	21	2,300 psi @ 72° F	68° to 240°	Soft	DIN 2391, DIN EN 10305-4	000000000	00000

Email Us

About Plastic and Rubber Tubing

About Metal Tubing

Self-Retracting Hard Plastic Tubing for Air and Water

Self-Retracting Firm Rubber Tubing for Air and Water

General Purpose Aluminum Tubing

Smooth-Bore Seamless Stainless Steel Tubing

Welded Stainless Steel Tubing

General Purpose Copper Tubing

Brass Tubing

Smooth-Bore Seamless Steel Tubing