How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Push-to-Connect Tube Fittings with Shut-Off for Air

- Temperature Range: 32° to 140° F
- Tubing: Fittings with Blue Release Ring: Use with firm or hard (Durometer 95A-95D) nylon plastic or polyurethane rubber
Fittings with Black Release Ring: Use with firm (Durometer 95A-45D) polyurethane rubber - Specifications Met: ISO 14743, except fittings with blue release ring
A built-in shut-off valve stops airflow when the fittings are disconnected from tubing. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting. Fittings have good corrosion resistance.
Identification rings (sold separately) snap over the release ring so you can color-code your lines.
Clips (sold separately) align and organize your tubing and fittings.
Fittings with PTFE thread sealant offer extra protection against leaks.

Release Ring | ||||||||
---|---|---|---|---|---|---|---|---|
For Tube OD | Pipe Size | Material | Material | Color | Max. Pressure | Features | Each | |
NPT Threads | ||||||||
1/4" | 1/4 | Nickel-Plated Brass | Plastic | Black | 140 psi @ 72° F | PTFE Thread Sealant | 00000000 | 000000 |

Color-code your lines by snapping these rings over the release ring on push-to-connect fittings.

For Tube OD | Material | Number of Clips | Each | |
3/16", 6mm, 1/4" | Nylon Plastic | 8 | 00000000 | 00000 |
Universal-Thread Nickel-Plated Brass
Push-to-Connect Tube Fittings for Air and Water


Threads
with Gasket
- Temperature Range: 0° to 175° F
- Tubing: Use with firm (Durometer 85A-100A) nylon plastic or polyurethane rubber
- Specifications Met: ISO 14743
Made of nickel-plated brass, these tube fittings resist corrosion better than plain brass fittings. The male threaded ends connect to NPT, NPTF, BSPP, BSPT, and other universal threads, so you don’t have to bother matching exact thread types. They also have a reusable gasket to protect against leaks. The tube ends connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect them, push the release ring and pull the tubing out of the fitting. These fittings are sometimes called instant fittings. All meet ISO 14743, which is an international standard for push-to-connect fittings for plastic tubing.


Threads
with Gasket
Fittings with a round body are ideal for tight spaces where fittings with a standard hex body wouldn't fit.


Threads
with Gasket
Nickel-Plated Brass Release Ring | ||||||
---|---|---|---|---|---|---|
For Tube OD | Pipe Size | Material | Gasket Material | Maximum Pressure | Each | |
BSPP, BSPT, NPT, NPTF, Universal Threads | ||||||
1/4" | 1/8 | Nickel-Plated Brass | Buna-N Rubber | 290 psi @ 72° F | 00000000 | 00000 |
Universal-Thread Stainless Steel
Push-to-Connect Tube Fittings for Air and Water


Threads
with Gasket
- Temperature Range: 5° to 390° F
- Tubing: Use with firm (Durometer 85A-100A) nylon plastic or polyurethane rubber
- Specifications Met: ISO 14743
Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job. They also have a reusable gasket to guard against leaks. The tube ends connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect them, push the release ring and pull the tubing out of the fitting. These fittings are often called instant fittings. All meet ISO 14743, an international standard for push-to-connect fittings for plastic tubing.


Threads
with Gasket
For Tube OD | Pipe Size | Material | Gasket Material | Max. Pressure | Each | |
BSPP, BSPT, NPT, NPTF, Universal Threads | ||||||
---|---|---|---|---|---|---|
5/16" | 1/4 | 316 Stainless Steel | Fluoroelastomer Rubber | 250 psi @ 72° F | 00000000 | 000000 |
Nickel-Plated Brass Push-to-Connect Tube Fittings for Air

- For Use With: Air, Lubricated Air
- Temperature Range: 0° to 140° F
- Tubing: Fittings with Release Ring and Fittings with no Release Type: Use with firm or hard (Durometer 95A-60D) nylon plastic, polyethylene plastic or polyurethane rubber
Fittings with Release Sleeve: Use with firm or hard (Durometer 95A-60D) polyethylene plastic or polyurethane rubber
Made of nickel-plated brass, these fittings have better corrosion resistance than unplated brass fittings. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring or sleeve and pull the tubing out of the fitting.
Metric and UN/UNF (SAE Straight) male threads with gasket or thread sealant provide extra protection against leaks. UN/UNF (SAE Straight) threads are also known as O-ring boss threads.
Universal-Thread Moisture-Resistant
Push-to-Connect Tube Fittings for Air and Water


Threads
with Gasket
- Temperature Range: 32° to 100° F
- Tubing: Use with firm (Durometer 90A-95A) nylon plastic or polyurethane rubber
The threads on these fittings mate with NPT, NPTF (Dryseal), BSPT, and BSPP threads. The male threads have a gasket to protect against leaks. Fittings are moisture and corrosion resistant, so they’re good for water and humid air applications. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting.


Threads
with Gasket
Release Ring | ||||||||
---|---|---|---|---|---|---|---|---|
For Tube OD | Pipe Size | Material | Gasket Material | Material | Color | Max. Pressure | Each | |
1/2" | 1/2 | Brass | 304 Stainless Steel, Buna-N Rubber | Plastic | Orange | 140 psi @ 72° F | 000000000 | 00000 |
Low-Temperature/High-Pressure D.O.T. Push-to-Connect Tube Fittings for Air

- Temperature Range: -40° to 200° F
- Tubing: Use with hard (Durometer 65D) nylon plastic
- Specifications Met:
Cartridges: D.O.T. FMVSS 571, SAE J2494-4, SAE J1131
All other fittings: D.O.T. FMVSS 571
Connect high-pressure brake lines with fittings that won’t crack in frigid temperatures. Often used on commercial trucks and trailers, these fittings meet Department of Transportation FMVSS 571 safety standards. Also known as instant fittings, they connect to tubing with a simple push, and an internal gripping ring and O-ring will hold the tubing tight. A built-in tube support slips inside the tubing to prevent it from collapsing. To disconnect, push on the release ring and pull the tubing out of the fitting. All have good corrosion resistance.

For Tube OD | Pipe Size | Material | Max. Pressure | Each | |
NPT Threads | |||||
---|---|---|---|---|---|
5/32" | 1/16 | Brass | 250 psi @ 72° F | 00000000 | 00000 |
Weld-Spatter-Resistant Push-to-Connect Tube Fittings for Air and Water

- Temperature Range: 32° to 100° F
- Tubing: Use with firm or hard (Durometer 90A-50D) nylon plastic or polyurethane rubber
Made of flame-resistant material, these fittings are good for welding and other applications where sparks occur. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting. They have good corrosion resistance.
Fittings with PTFE thread sealant offer extra protection against leaks.
Brass Low-Pressure Barbed Tube Fittings for Air and Water
A brass body provides protection against corrosive environments. Fittings have barbs that grip onto tubing.
NPTF (Dryseal) fittings are compatible with NPT threads.

- Temperature Range: NPT, UN/UNF (SAE Straight) Threads: 32° to 180° F
NPTF Threads: -65° to 75° F
BSPT Threads: -40° to 160° F - Tubing: NPT, UN/UNF (SAE Straight) Threads: Use with firm (Durometer 85A) polyurethane rubber
NPTF Threads: Use with firm (Durometer 95A) polyurethane rubber
BSPT Threads: Use with firm (Durometer 85A) nylon plastic
For Tube ID | Pipe Size | Number of Barbs | Material | Max. Pressure | Lg. | Pkg. Qty. | Pkg. | |
NPTF Threads | ||||||||
---|---|---|---|---|---|---|---|---|
3/32" | 1/8 | Multiple | Brass | 100 psi @ 72° F | 27/32" | 1 | 000000000 | 00000 |

- Temperature Range: See table
- Tubing: Inch: Use with firm (Durometer 95A) polyurethane rubber
Metric: Use with polyurethane rubber
For Tube ID | Number of Barbs | Material | Max. Pressure | Temp. Range, °F | Lg. | Each | |
0.17" | Multiple | Brass | 100 psi @ 72° F | -65° to 75° | 27/32" | 000000000 | 00000 |
Choose-a-Color Aluminum Low-Pressure Barbed Tube Fittings for Air and Water
- For Use With: Air, Lubricated Air, Water
- Temperature Range: -40° to 230° F
- Tubing: Use with hard (Durometer 75A-60D) EVA plastic, polyethylene plastic, polyurethane rubber or PVDF plastic
Color-code fittings for easy identification. Fittings are aluminum, which is lightweight with good corrosion resistance. The barb grips onto tubing, providing a secure hold with no clamp required.
Aluminum Low-Pressure Barbed Tube Fittings for Air and Water
- For Use With: Air, Lubricated Air, Water
- Temperature Range: -40° to 230° F
- Tubing: Use with hard (Durometer 75A-60D) EVA plastic, polyethylene plastic, polyurethane rubber or PVDF plastic
Made of aluminum, these fittings are lighter in weight than other metal barbed tube fittings and have good corrosion resistance. The barb grips onto tubing, providing a secure hold with no clamp required.
Stainless Steel High-Pressure Barbed Tube Fittings for Air and Water
- Temperature Range: See table
- Tubing: Use with firm (Durometer 75A-95A) EVA plastic, polyethylene plastic, polypropylene plastic or PVC plastic
Fittings withstand pressures up to 250 psi. They are 303 stainless steel for very good corrosion resistance.

For Tube ID | Pipe Size | Material | Max. Pressure | Temp. Range, °F | Number of Barbs | Each | |
NPT Threads | |||||||
---|---|---|---|---|---|---|---|
1/8" | 1/8 | 303 Stainless Steel | 250 psi @ 72° F | -40° to 1200° F | Single | 0000000 | 00000 |
0.17" | 1/8 | 303 Stainless Steel | 250 psi @ 72° F | -40° to 1200° F | Single | 0000000 | 0000 |
BSPT Threads | |||||||
1/8" | 1/8 | 303 Stainless Steel | 250 psi @ 72° F | -40° to 1200° F | Single | 0000000 | 0000 |
0.17" | 1/8 | 303 Stainless Steel | 250 psi @ 72° F | -40° to 1200° F | Single | 0000000 | 0000 |
Brass High-Pressure Barbed Tube Fittings for Air and Water
- Temperature Range: -40° to 250° F
- Tubing: Use with hard (Durometer 65A-60D) EVA plastic, polyurethane rubber or PTFE plastic
These fittings can handle higher pressures than other brass barbed tube fittings for air and water. The barb grips onto tubing, providing a secure hold with no clamp required. Fittings are brass for good corrosion resistance.
For technical drawings and 3-D models, click on a part number.

For Tube ID | Pipe Size | Material | Barb Material | Max. Pressure | Each | |
NPT Threads | ||||||
---|---|---|---|---|---|---|
1/8" | 1/8 | Brass | 321 Stainless Steel | 250 psi @ 72° F | 00000000 | 000000 |
Tight-Seal Plastic Barbed Tube Fittings for Air and Water
Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections. Fittings are nylon for excellent impact and abrasion resistance.

- Temperature Range: See table
- Tubing: Use with firm (Durometer 75A-80A) polyurethane rubber or PVC plastic
- Clarity: Black: Opaque; White: Opaque; Off-White: Semi-Clear
Easy-View Plastic Barbed Tube Fittings for Air and Water
- Temperature Range: -210° to 270° F
- Tubing: Use with firm or soft (Durometer 45A-90A) polyurethane rubber or PVC plastic
Monitor flow with these clear fittings. They have a single barb that creates a smooth clamping surface for extra-tight connections that minimize leaks. Fittings are polycarbonate for excellent impact resistance.

For Tube ID | Material | Color | Max. Pressure | Pkg. Qty. | Pkg. | |
1/8" | Polycarbonate Plastic | Clear | 125 psi @ 72° F | 10 | 0000000 | 00000 |
Quick-Assembly Brass Compression Tube Fittings for Air and Water

- Temperature Range: 0° to 150° F
- Tubing: Fittings with acetal plastic sleeves: Use with (firm or hard) polyethylene plastic or polypropylene plastic
Fittings with brass sleeves: Use with (firm or hard) nylon plastic, polyethylene plastic or polypropylene plastic
These fittings include a nut with a built-in sleeve (ferrule), so there’s no need to remove the nut for assembly. The sleeve compresses the tubing as you tighten the nut, creating a strong seal. Fittings are also known as flareless fittings. They are brass for good corrosion resistance.
Tube supports are recommended if you want to use the fittings with soft polyethylene, polypropylene, or PVC plastic tubing. They prevent the tube from collapsing.
UN/UNF (SAE Straight) male threads have a gasket to protect against leaks. Also known as O-ring boss threads.


(SAE Straight) Male
Threads with Gasket
For Tube OD | Thread Size | Material | Gasket Material | Sleeve Material | Max. Pressure | Each | |
UN/UNF (SAE Straight) Threads | |||||||
---|---|---|---|---|---|---|---|
1/8" | 10-32 | Brass | Buna-N Rubber | Brass | 150 psi @ 72° F | 0000000 | 00000 |
Brass Luer Lock Tube Couplings for Air

Quickly connect low-pressure air lines with these luer lock couplings. Made of brass, they are stronger and more durable than plastic tube couplings. These couplings have a nickel plating for extra protection against corrosive environments. Luer lock connections are universal, so you can connect any plug and socket to each other, regardless of the pipe or tube size. You can also connect them to syringes and needles. These couplings have a compact body, so they’re easy to fit in tight spaces. All are open-flow style, so there is no shut-off valve to stop the flow when the coupling is separated.
Note: For a complete coupling, order a plug and a socket.
Luer Lock Tube Couplings for Plastic and Rubber Tubing—High-Purity

- For Use With: Air, Water
- Temperature Range: Nylon Plastic: -50° to 275° F
Polyolefin Plastic: Up to 355° F
Polypropylene Plastic: -5° to 150° F - Tubing: Use with soft or firm (Durometer 50A-95A) polyolefin plastic, PVC plastic, silicone rubber, TPE plastic, or TPU plastic
To prevent contamination, these couplings are cleaned, double bagged, and packaged in a clean room. This makes them a great choice for applications where cleanliness is critical, such as semiconductor manufacturing. Known for their versatility, they fit any luer lock plug, socket, syringe, or needle. They’re quick to attach and detach, so they’re often used in lines that are frequently disconnected. Thanks to their compact body, they fit in tight spaces. Use them in low-pressure applications.
Note: For a complete coupling, order a plug and a socket.
Barbed couplings securely grip tubing and hose.
Nylon couplings have excellent impact and abrasion resistance. Use them in general purpose applications. Polyolefin couplings are BPA-free and autoclavable. Polypropylene couplings resist moisture and chemicals, including solvents. They also stand up to impact and abrasion.
37° Flared Fittings for Stainless Steel Tubing

- Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Specifications Met: ISO 8434, SAE J514, except fittings with BSPP and BSPT threads meet SAE J514 only
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They withstand high pressure, so they’re often used in hydraulic applications. Made from 316 stainless steel, they resist corrosion from water and chemicals. A complete fitting requires a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.

- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: See table
For Tube OD | Material | Temp. Range, °F | Each | |
3/8" | 316 Stainless Steel | -420° to 1200° | 000000000 | 000000 |

- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
For Tube OD | Nut Material | Each | |
3/8" | 316 Stainless Steel | 000000000 | 00000 |

- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°. Sleeves are 316 stainless steel for excellent corrosion resistance. They are also known as ferrules.
Inch × metric sleeve adapters convert the fitting from inch to metric.
Precision AN 37° Flared Fittings for Stainless Steel Tubing

- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -320° to 1200° F
- Tubing: Use with seamless 304 or 316 stainless steel
- Specifications Met: See table
The threads on the tube end of these fittings are Class 3A or 3B and adhere to tighter tolerances than other 37° flared fittings. They are made to exact AS (formerly AN) specifications and provide a tight metal-to-metal seal on tubing that is flared to 37°. Fittings require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
Yor-Lok Fittings for Stainless Steel Tubing

A nut with two sleeves (ferrules) gives these fittings extra gripping power. The sleeves bite into tubing as you tighten the nut, creating a strong seal. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and A-Lok fittings.
316 stainless steel fittings have excellent corrosion resistance.

- For Use With: Air, Cutting Oil, Fuel Oil, Gasoline, Hydraulic Fluid, Mineral Oil, Natural Gas, Steam, Water
- Tubing: Use with welded or seamless 304/304L or 316/316L stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
Caps for tubing have a nut and a sleeve so you can close off the end of your tubing in place of a fitting.
For Tube | ||||||
---|---|---|---|---|---|---|
OD | Wall Thick. | Material | Max. Pressure | Temp. Range, °F | Each | |
For Tubing | ||||||
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | -420° to 1200° | 00000000 | 000000 |

Use these nuts with Yor-Lok sleeves and fittings to create an extra-strong seal on stainless steel tubing. They are 316 stainless steel for excellent corrosion resistance.
For Tube | ||||||
---|---|---|---|---|---|---|
OD | Wall Thick. | Nut Material | Max. Pressure | Temp. Range, °F | Each | |
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |


Couple these sleeves with Yor-Lok nuts and fittings to create an extra-strong seal on stainless steel tubing. Sleeves are 316 stainless steel for excellent corrosion resistance. They are also known as ferrules.

Save time installing sleeves and nuts—these sets come oriented in the correct direction and order on a dispenser. To install them, slide off a set and place it on your tubing. Each front sleeve, back sleeve, and nut is made of 316 stainless steel for excellent corrosion resistance. Five sets of sleeves and nuts come on each dispenser. Sleeves are also known as ferrules.
For Tube | Front Sleeve | Back Sleeve | Nut | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
OD | Wall Thick. | Material | Lg. | No. Included | Lg. | No. Included | Lg. | No. Included | Max. Pressure | Each | |
Sets with Dispenser | |||||||||||
3/16" | 0.035" | 316 Stainless Steel | 3/16" | 5 | 3/32" | 5 | 15/32" | 5 | 5,500 psi @ 72° F | 0000000 | 000000 |

For Tube OD | Sleeve Material | Max. Pressure | Temp. Range, °F | Each | |
3/16" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 000000 |
Compression Fittings for Stainless Steel Tubing

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included. Fittings are also known as flareless fittings or bite fittings. Use them in low- to medium-pressure applications.
303 stainless steel fittings and 360 brass fittings have good corrosion resistance. Metric and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks. UN/UNF (SAE Straight) threads are also known as O-ring boss threads.


(SAE Straight) Male
Threads with Gasket
- For Use With:
303 Stainless Steel, 316 Stainless Steel with 17-4 PH Stainless Steel Sleeve, and 360 Brass: Air, Water, Hydraulic Fluid
316 Stainless Steel: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water - Temperature Range: See table
- Tubing: See table
- Specifications Met:
316 Stainless Steel: ISO 8434, DIN 2353
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: SAE J514
For Tube | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
OD | Wall Thick. | Thread Size | Material | Gasket Material | Sleeve Material | Max. Pressure | Temp. Range, °F | For Tube Material | For Tube Fabrication | Each | |
UN/UNF (SAE Straight) Threads | |||||||||||
1/4" | 0.03" | 10-32 | 303 Stainless Steel | Fluoroelastomer Rubber | 303 Stainless Steel | 2,000 psi @ 72° F | -4° to 400° | 304 Stainless Steel, 316 Stainless Steel | Seamless, Welded | 0000000 | 000000 |
1/4" | 0.03" | 10-32 | 360 Brass | Buna-N Rubber | 360 Brass | 2,000 psi @ 72° F | -40° to 250° | 304 Stainless Steel, 316 Stainless Steel | Seamless, Welded | 0000000 | 00000 |

- For Use With: See table
- Temperature Range: See table
- Tubing: See table
- Specifications Met: See table
For Tube | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
OD | Wall Thick. | Nut Material | Max. Pressure | For Use With | Temp. Range, °F | For Tube Material | For Tube Specifications Met | For Tube Fabrication | Specifications Met | Each | |
1/4" | 0.035" | 316 Stainless Steel | 4,000 psi @ 72° F | Air, Hydraulic Fluid, Water | -420° to 1200° | 304 Stainless Steel, 316 Stainless Steel | ASTM A269 | Seamless, Welded | SAE J514 | 000000000 | 00000 |

- For Use With:
17-4 PH Stainless Steel: Air, Hydraulic Fluid, Water
316 Stainless Steel: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water - Temperature Range:
17-4 PH Stainless Steel: -420° to 1200° F
316 Stainless Steel: -75° to 750° F - Tubing:
17-4 PH Stainless Steel: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A269
316 Stainless Steel: Use with seamless 304 or 316/316L/316Ti stainless steel that meets DIN EN 10216-5 or DIN EN 10305-1 - Specifications Met:
17-4 PH Stainless Steel: SAE J514
316 Stainless Steel: ISO 8434-1, DIN 2353
For Tube | |||||
---|---|---|---|---|---|
OD | Wall Thick. | Sleeve Material | Max. Pressure | Each | |
1/4" | 0.035" | 17-4 PH Stainless Steel | 4,000 psi @ 72° F | 000000000 | 00000 |
Precision Compression Fittings for Stainless Steel Tubing

- For Use With: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water
- Temperature Range: -420° to 1200° F
- Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Compatible With: Parker CPI
Made to tighter tolerances than other compression fittings, these are designed for high-precision applications. Also known as instrumentation fittings and flareless fittings. They come with a nut and a single sleeve (ferrule). The sleeve bites into tubing as you tighten the nut to create a strong seal. Fittings are 316 stainless steel for excellent corrosion resistance. A molybdenum disulfide coating on the nut acts as a lubricant for easy installation.

Caps for tubing have a nut and a sleeve so you can close off the end of your tubing in place of a fitting.
For Tube | For Tubing | ||||
---|---|---|---|---|---|
OD | Wall Thick. | Material | Max. Pressure | Each | |
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 | 000000 |

For Tube | ||||
---|---|---|---|---|
OD | Wall Thick. | Nut Material | Max. Pressure | |
3/16" | 0.035" | Molybdenum-Disulfide-Coated 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 |

For Tube | ||||
---|---|---|---|---|
OD | Wall Thick. | Sleeve Material | Max. Pressure | |
3/16" | 0.035" | 316 Stainless Steel | 5,500 psi @ 72° F | 00000000 |
37° Flared Fittings for Steel Tubing

- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Tubing: Use with seamless steel
- Specifications Met: SAE J514
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately. Fittings are zinc-plated steel for fair corrosion resistance.

- Temperature Range: -60° to 400° F
For Tube OD | Material | Max. Pressure | Each | |
3/8" | Zinc-Plated Steel | 1,250 psi @ 72° F | 000000000 | 00000 |
45° Flared Fittings for Copper and Brass Tubing

- Temperature Range: -65° to 250° F
- Tubing: Use with seamless brass and copper that meets ASTM B280
No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They require a nut (sold separately) for each tube end. Fittings are also known as refrigeration and SAE fittings. They are brass for good corrosion resistance.
Copper tube size is the accepted designation of the copper tubing industry, not the actual tube OD.

- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water;
except caps for 1/8" tube OD are only for use with refrigerant - Specifications Met: See table
For Tube | Each | |||||||
---|---|---|---|---|---|---|---|---|
OD | Wall Thick. | Material | Max. Pressure | Specifications Met | 1-9 | 10-49 | 50-Up | |
1/2" | 0.032" | Brass | 750 psi @ 72° F | SAE J512, SAE J513, UL Listed | 000000000 | 00000 | 00000 | 00000 |



- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water; except nuts for 1" tube OD are not for use with fuel oil
- Specifications Met: SAE J512, SAE J513, UL Listed; except nuts for 1" tube OD meet SAE J512 and SAE J513 only
For Tube | Each | ||||||||
---|---|---|---|---|---|---|---|---|---|
OD | Wall Thick. | Nut Material | Max. Pressure | Lg. | 1-19 | 20-99 | 100-Up | ||
Short Nuts | |||||||||
A | 1/2" | 0.032" | Brass | 750 psi @ 72° F | 1" | 000000000 | 00000 | 00000 | 00000 |
A | 1/2" | 0.083" | Brass | 750 psi @ 72° F | 1 1/8" | 000000000 | 0000 | 0000 | 0000 |
B | 1/2" | 0.032" | Brass | 750 psi @ 72° F | 27/32" | 000000000 | 0000 | 0000 | 0000 |
Long Nuts | |||||||||
A | 1/2" | 0.083" | Brass | 750 psi @ 72° F | 1 5/8" | 000000000 | 0000 | 0000 | 0000 |
Precision Compression Fittings for Copper Tubing

- For Use With: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water
- Temperature Range: -40° to 350° F
- Tubing: Use with seamless copper that meets ASTM B68, ASTM B75, or ASTM B88
- Compatible With: Parker CPI
Made to tighter tolerances than other compression fittings, these are designed for high-precision applications. They are also known as instrumentation fittings and flareless fittings. They come with a nut and a single sleeve (ferrule). The sleeve bites into tubing as you tighten the nut to create a strong seal. Fittings are brass for good corrosion resistance.

Caps for tubing have a nut and a sleeve so you can close off the end of your tubing in place of a fitting.
For Tube | Caps For Tubing | |||||
---|---|---|---|---|---|---|
OD | Wall Thick. | Material | Nut Material | Max. Pressure | Each | |
3/16" | 0.035" | Brass | Brass | 2,300 psi @ 72° F | 00000000 | 00000 |

For Tube | |||||
---|---|---|---|---|---|
OD | Wall Thick. | Sleeve Material | Max. Pressure | Each | |
3/16" | 0.035" | Brass | 1,200 psi @ 72° F | 00000000 | 00000 |
Yor-Lok Fittings for Copper Tubing

- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Gasoline, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -40° to 400° F
- Tubing: Use with seamless copper
- Specifications Met: ASME B31.3
A nut with two sleeves (ferrules) gives these fittings extra gripping power. The sleeves bite into tubing as you tighten the nut, creating a strong seal. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. Fittings are brass for good corrosion resistance. They are compatible with Swagelok®, Let-Lok, and A-Lok fittings.

Caps for tubing have a nut and a sleeve so you can close off the end of your tubing in place of a fitting.
For Tube | For Tubing | ||||
---|---|---|---|---|---|
OD | Wall Thick. | Material | Max. Pressure | Each | |
3/16" | 0.035" | Brass | 2,300 psi @ 72° F | 00000000 | 00000 |

For Tube OD | Nut Material | Max. Pressure | Each | |
3/16" | Brass | 2,300 psi @ 72° F | 00000000 | 00000 |

Front Sleeve | Back Sleeve | |||||||
---|---|---|---|---|---|---|---|---|
For Tube OD | Sleeve Material | Lg. | No. Included | Lg. | No. Included | Max. Pressure | Each | |
3/16" | Brass | 3/16" | 1 | 3/32" | 1 | 2,300 psi @ 72° F | 00000000 | 00000 |

Save time installing sleeves—these sets come oriented in the correct direction and order on a dispenser. To install them, slide off a set and place it on your tubing. Each set includes a front and back sleeve. The sleeves are also known as ferrules.
Front Sleeve | Back Sleeve | |||||||
---|---|---|---|---|---|---|---|---|
For Tube OD | Sleeve Material | Lg. | No. Included | Lg. | No. Included | Max. Pressure | Each | |
3/16" | Brass | 3/16" | 10 | 7/64" | 10 | 1,800 psi @ 72° F | 00000000 | 000000 |

Save time installing sleeves and nuts—these sets come oriented in the correct direction and order on a dispenser. To install them, slide off a set and place it on your tubing. Each set includes a front sleeve, a back sleeve, and a nut. The sleeves are also known as ferrules.
Front Sleeve | Back Sleeve | Nut | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Tube OD | Material | Lg. | No. Included | Lg. | No. Included | Lg. | No. Included | Max. Pressure | Each | |
3/16" | Brass | 3/16" | 5 | 7/64" | 5 | 15/32" | 5 | 1,800 psi @ 72° F | 0000000 | 000000 |

For Tube | Tube Support | |||||
---|---|---|---|---|---|---|
OD | ID | Style | Material | Max. Pressure | Each | |
3/16" | 1/8" | Barbed | Brass | 1,800 psi @ 72° F | 0000000 | 00000 |