Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

An internal check valve permits reverse flow, so these regulators work with double-acting cylinders.

Use these regulators to adjust and maintain the pressure of your tubing air lines.

A lower profile than our other compressed air regulators makes these regulators a better fit in tight spots.

Cleaned and double bagged in an ISO Class 3 and Fed. Spec. Class 1 clean room for protection from contamination, these regulators are suitable for use in clean rooms.

Fit these regulators in tight spaces to adjust and maintain air pressure in sensitive applications where constant, consistent pressure is important.

A 316 stainless steel housing provides superior corrosion resistance and meets NACE (National Association of Corrosion Engineers) material requirement MR-01-75.

With a greater flow capacity than our standard precision compressed air regulators, use these regulators to adjust and maintain air pressure in sensitive high-flow applications where constant, consistent pressure is important.

Designed for control applications that require high reliability and repeatability, these regulators translate electrical signals to output pressure.

Keep an eye on the output pressure in high-flow applications—these regulators have a display so you can monitor your application locally.

Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.

Use a single air supply to meet the pressure requirements of multiple applications—connect one of these manifolds to your air line, and then set a different output pressure for each station.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.

A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.

A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.

With one outlet port before the lubricator and one after, these filter/regulator/lubricators work in systems that require lubrication in some lines but not in others.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Compression fittings bite down on hard metal and plastic tubing for a tighter seal than push-to-connect fittings.

A cast iron body absorbs vibration from pressure changes to reduce wear and noise in your pipeline.

These valves automatically reduce a high, variable inlet pressure to a lower, stable outlet pressure.

For a longer service life than brass and cast iron valves, these have a durable bronze body.

Often used in wet conditions and harsh environments, these valves have a 316 stainless steel body for excellent corrosion resistance.

Rated for more than double the temperature of standard pressure-regulating valves, these can withstand temperatures up to 550° F.

For extremely high-pressure applications in tight spots, these valves handle the same inlet pressures as other ultra-high-pressure-regulating valves within a smaller footprint.

Often used on dispensers, humidifiers, and fountains, these valves have a 316 stainless steel body that can stand up to deionized water and corrosive conditions.

Withstand more than six times the inlet pressure of standard pressure-regulating valves.

Excellent performance at low pressures.

For easy panel mounting in your water system, these valves have threads below the adjustment knob and come with a panel-mount nut.

Withstand inlet pressures up to 3,500 psi.

Our smallest pressure-regulating valve.

Maintain contaminant-free standards in clean room environments. These valves come cleaned and bagged to Fed. Spec. Class 100 and ISO Class 5 clean room standards and have a 316 stainless steel body with a smooth finish to resist dust collection.

A 316 stainless steel body provides exceptional corrosion resistance in wet conditions and harsh environments.

A plastic body and fluoroelastomer seal stand up to harsh chemicals.

Control steam line pressure with ±1 psi accuracy.

Body is cast iron.

For a longer service life than cast iron valves, these have a durable bronze body.