Power Source Power Source | Show |
---|
|
For Disc Mount Type For Disc Mount Type |
---|
|
Maximum No-Load Speed Maximum No-Load Speed |
---|
|
|
Length Length |
---|
|
|
|
Number of Speeds Number of Speeds |
---|
|
Average Air Consumption Average Air Consumption |
---|
|
Motor Speed Motor Speed |
---|
|
Arm Range of Motion Arm Range of Motion |
---|
|
The orbital motion produces more consistent finishes than standard disc sanders. Also known as random orbital sanders. They work with either adhesive-back discs or hook and loop discs.
11 1/4"-long and longer sanders give you more control than shorter sanders. They’re useful for sanding the vertical sides of workpieces because you can use two hands to control them.
Sanders with 3/8" orbit diameter are good for aggressive sanding, such as shaping material.
Sanders with 3/16" orbit diameter are useful for general purpose sanding.
Sanders with 3/32" orbit diameter are best for finishing pieces with ultra-fine sanding.
For technical drawings and 3-D models, click on a part number.
Sanders | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spindle | Air Inlet | Replacement Backup Pads | |||||||||||||||
For Disc Dia. | Max. No-Load Speed, rpm | No. of Speeds | hp | Thread Size | Gender | Average Air Consumption | O'all Lg. | Wt., lbs. | Pipe Size | Thread Type | Gender | For Air Hose ID | Includes | Each | Each | ||
3/8" Orbit Dia. | |||||||||||||||||
3 1/2" | 12,000 | Variable | 0.25 | 5/16"-24 | Female | 16 cfm @ 90 psi | 6" | 1 1/2 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 0000000 | 00000000 | 000000 |
5" | 12,000 | Variable | 0.25 | 5/16"-24 | Female | 16 cfm @ 90 psi | 6 1/2" | 1 1/2 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
6" | 12,000 | Variable | 0.25 | 5/16"-24 | Female | 16 cfm @ 90 psi | 7" | 1 3/4 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
3/16" Orbit Dia. | |||||||||||||||||
3 1/2" | 12,000 | Variable | 0.25 | 5/16"-24 | Female | 16 cfm @ 90 psi | 6" | 1 1/2 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
5" | 12,000 | Variable | 0.3 | 5/16"-24 | Female | 19 cfm @ 90 psi | 7" | 2 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
5" | 12,000 | Variable | 0.3 | 5/16"-24 | Female | 2 cfm @ 90 psi | 6 1/2" | 1 1/2 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
5" | 12,000 | Variable | 0.45 | 5/16"-24 | Female | 23 cfm @ 90 psi | 11 1/4" | 2 1/2 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
6" | 12,000 | Variable | 0.3 | 5/16"-24 | Female | 19 cfm @ 90 psi | 7 1/2" | 2 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
6" | 12,000 | Variable | 0.3 | 5/16"-24 | Female | 2 cfm @ 90 psi | 7" | 1 1/2 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
6" | 12,000 | Variable | 0.45 | 5/16"-24 | Female | 23 cfm @ 90 psi | 11 1/2" | 2 3/4 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
8" | 10,000 | Variable | 0.45 | 5/16"-24 | Female | 23 cfm @ 90 psi | 12 1/2" | 4 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
3/32" Orbit Dia. | |||||||||||||||||
3 1/2" | 12,000 | Variable | 0.25 | 5/16"-24 | Female | 16 cfm @ 90 psi | 6" | 1 1/2 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
5" | 12,000 | Variable | 0.25 | 5/16"-24 | Female | 16 cfm @ 90 psi | 6 1/2" | 1 1/2 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
5" | 12,000 | Variable | 0.3 | 5/16"-24 | Female | 19 cfm @ 90 psi | 7" | 1 3/4 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
6" | 12,000 | Variable | 0.25 | 5/16"-24 | Female | 16 cfm @ 90 psi | 7" | 1 1/2 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
6" | 12,000 | Variable | 0.3 | 5/16"-24 | Female | 19 cfm @ 90 psi | 7 1/2" | 2 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
These sanders come ready to hook up to a self-contained dust collection kit (sold separately). The orbital motion produces more consistent finishes than standard disc sanders. Also known as random orbital sanders. Use with adhesive-back vacuum sanding discs.
Sanders | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spindle | Air Inlet | Replacement Backup Pads | ||||||||||||||||
For Disc Dia. | No. of Vacuum Holes | Max. No-Load Speed, rpm | No. of Speeds | hp | Thread Size | Gender | Average Air Consumption | O'all Lg. | Wt., lbs. | Pipe Size | Thread Type | Gender | For Air Hose ID | Includes | Each | Each | ||
5" | 5 | 12,000 | Variable | 0.3 | 5/16"-24 | Female | 2 cfm @ 90 psi | 8 1/2" | 1 1/2 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 0000000 | 00000000 | 000000 |
6" | 6 | 12,000 | Variable | 0.3 | 5/16"-24 | Female | 2 cfm @ 90 psi | 9" | 1 1/2 | 1/4 | NPT | Female | 1/4" | Backup Pad | 00000000 | 000000 | 00000000 | 00000 |
Required Dust-Collection Kit | 00000000 | Each | 000000 |
These sanders move in a rotary motion.
Sanders for 2” dia. discs are used with Style B quick-change discs and require a backup pad (not included).
Sanders for discs 3” dia. and larger are used with adhesive-back discs.
Sanders | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spindle | Air Inlet | Replacement Backup Pads | |||||||||||||||
For Disc Dia. | Max. No-Load Speed, rpm | No. of Speeds | hp | Thread Size | Gender | Average Air Consumption | O'all Lg. | Wt., lbs. | Pipe Size | Thread Type | Gender | For Air Hose ID | Includes | Each | Each | ||
3", 4 1/2", 5" | 20,000 | Variable | 0.3 | 7/16"-20 | Male | 4 cfm @ 90 psi | 8 1/4" | 2 1/2 | 3/8 | NPT | Female | 3/8" | Three Backup Pads | 0000000 | 000000 | 0000000 | 00000 |
6" | 10,000 | Variable | 1/2 | 5/16"-24 | Female | 4 cfm @ 90 psi | 9 1/2" | 4 | 1/4 | NPT | Female | 3/8" | Backup Pad | 0000000 | 00000 | 0000000 | 00000 |
With a built-in water hose that lubricates your work surface and washes away the resulting grit, these sanders are less likely to scratch your surface than other air-powered sanders. They also extend the life of your sandpaper. Use them to polish molds, car bodies, and other surfaces that are easy to scratch. Their random orbital motion creates a finish that’s free of swirls and more consistent than standard disc sanders. Pair them with hook and loop sanding discs; swap discs out using the quick-release pad.
Spindle | Air Inlet | Hose | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Disc Dia. | Max. No-Load Speed, rpm | No. of Speeds | Thread Size | Gender | Average Air Consumption | O'all Lg. | Wt., lbs. | Pipe Size | Thread Type | Gender | For Air Hose ID | Includes | Lg., ft | Material | Color | Each | |
6" | 13,000 | Variable | 5/16"-24 | Female | 11 cfm @ 90 psi | 7" | 2 1/2 | 1/4 | NPT | Male | 3/8" | Backup Pad, Water Hose with Built-In Filter | 20 | Vinyl Plastic | Blue | 0000000 | 0000000 |
The narrow belt is good for sanding in tight spaces. These sanders have an arm that pivots 360°. Sanding belts are sold separately.
Adjustable belt tracking lets you maintain proper belt tension.
For Belt | Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg. | Max. No-Load Speed, sfpm | No. of Speeds | hp | Motor Speed, rpm | Average Air Consumption | O'all Lg. | Wt., lbs. | Pipe Size | Thread Type | Gender | For Air Hose ID | Features | Each | |
3/8" | 13" | 4,354 | Variable | 0.35 | 22,000 | 7 cfm @ 90 psi | 12" | 2 | 1/4 | NPT | Female | 3/8" | Exhaust Muffler | 00000000 | 0000000 |
1/2" | 18" | 5,730 | Variable | 1/2 | 20,000 | 22 cfm @ 90 psi | 15" | 2 1/2 | 1/4 | NPT | Female | 3/8" | Exhaust Muffler, Adjustable Belt Tracking | 00000000 | 000000 |
3/4" | 20 1/2" | 5,730 | Variable | 1/2 | 20,000 | 22 cfm @ 90 psi | 16 1/4" | 2 3/4 | 1/4 | NPT | Female | 3/8" | Exhaust Muffler, Adjustable Belt Tracking | 00000000 | 000000 |
The insulated housing reduces vibration and won’t transmit cold air to the operator’s hand. The narrow belt is good for sanding in tight spaces. These sanders have adjustable belt tracking that lets you maintain proper belt tension. Sanding belts are sold separately.
You can change the contact arm on your sander to sand different types of surfaces.
For Belt | Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg. | Max. No-Load Speed, sfpm | No. of Speeds | hp | Motor Speed, rpm | Average Air Consumption | O'all Lg. | Wt., lbs. | Pipe Size | Thread Type | Gender | For Air Hose ID | Arm Range of Motion | Each | |
Fixed Arm | |||||||||||||||
1/2" | 24" | 5,800 | Variable | 1/2 | 20,000 | 4 cfm @ 90 psi | 14 1/2" | 3 | 1/4 | NPT | Female | 3/8" | __ | 0000000 | 0000000 |
Pivoting Arm | |||||||||||||||
3/4" | 18" | 4,550 | Variable | 1/2 | 20,000 | 4 cfm @ 90 psi | 14 1/4" | 2 1/2 | 1/4 | NPT | Female | 3/8" | 360° | 0000000 | 000000 |
3/4" | 20 1/2" | 4,550 | Variable | 1/2 | 20,000 | 4 cfm @ 90 psi | 14 1/4" | 2 1/2 | 1/4 | NPT | Female | 3/8" | 360° | 0000000 | 000000 |
For Belt | ||||
---|---|---|---|---|
Arm Style | Wd. | Lg. | Each | |
For Fixed-ArmSander | ||||
Standard | 1/2" | 24" | 0000000 | 000000 |
Heavy Duty | 1/2" | 24" | 0000000 | 000000 |
For Narrow Spaces | 1/4" | 24" | 0000000 | 00000 |
Low Profile | 1/4" | 24" | 0000000 | 000000 |
For Curved Surfaces | 1/4", 1/2" | 24" | 0000000 | 00000 |
For Pivoting-ArmSander | ||||
Standard | 5/8", 3/4" | 18" | 0000000 | 00000 |
Heavy Duty | 5/8", 3/4" | 18" | 0000000 | 000000 |
For Narrow Spaces | 1/4" | 18" | 0000000 | 00000 |
For Narrow Spaces | 5/8", 3/4" | 20 1/2" | 0000000 | 000000 |
For Curved Surfaces | 1/4", 1/2" | 18" | 0000000 | 00000 |
For Curved Surfaces | 5/8", 3/4" | 18" | 0000000 | 000000 |
Component | Each | |
For Fixed-Arm Sander | ||
---|---|---|
Air Motor | 0000000 | 0000000 |
Air Motor Repair Kit | 0000000 | 000000 |
Drive Wheel | 0000000 | 00000 |
Idler Arm Assembly | 0000000 | 00000 |
Idler Wheel Assembly | 0000000 | 00000 |
Safety Throttle Lever | 0000000 | 00000 |
Tension Spring | 0000000 | 0000 |
Throttle Lever Pin | 0000000 | 0000 |
For Pivoting-Arm Sander | ||
Air Motor | 0000000 | 000000 |
Air Motor Repair Kit | 0000000 | 000000 |
Belt Aligning Tension Spring | 0000000 | 0000 |
Drive Wheel | 0000000 | 00000 |
Safety Throttle Lever | 0000000 | 00000 |
Throttle Lever Pin | 0000000 | 0000 |
Set Screw | 0000000 | 0000 |
For Fixed-Arm and Pivoting-Arm Sander | ||
Belt Aligning Knob | 0000000 | 0000 |
The orbital motion produces consistent finishes. Also known as jitterbug sanders. Sanding sheets are sold separately.
Sanders | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Sheet | Air Inlet | Replacement Backup Pads | ||||||||||||||
Wd. | Lg. | Max. No-Load Speed, orbits/min. | No. of Speeds | hp | Average Air Consumption | O'all Lg. | Wt., lbs. | Pipe Size | Thread Type | Gender | For Air Hose ID | Includes | Each | Each | ||
3 2/3" | 9" | 8,000 | Variable | 0.3 | 12 cfm @ 90 psi | 8 1/4" | 4 | 1/4 | NPT | Female | 3/8" | Backup Pad | 0000000 | 0000000 | 0000000 | 000000 |
Replacement Shoe Assembly | 0000000 | Each | 000000 |
Automate sanding on your line by attaching these sanders to a robot arm. Compared to sanders operated by humans, these apply the same force and pattern for a more consistent and repeatable finish. To program them, connect them to your robot controller using the solenoid valves with wire leads. They’re certified by Universal Robots (UR), which means they’ve validated that these sanders are compatible with their arms. To help ensure an accurate finish, use a force torque sensor (not included).
Attach these sanders to your robot’s wrist with mounts for end of robot arm and robot tool (each sold separately). The mounts for end of robot arm have a mounting pattern that conforms to ISO 31.5 mm, 40 mm, and 50 mm, so they’ll work with most industrial robots and cobots. Since they’re a quick-connect tool changer, they let you switch out one sander for another without taking apart hardware.
Add an air coupler to install your own quick-connect fittings for the air input on these sanders.
Disc sanders, or random orbital sanders, move in both circular and back and forth motions. That’s why they leave minimal swirl patterns and aren’t limited to moving with the grain of your workpiece. However, these sanders can’t fit into corners because their pads are circular.
Sheet sanders use rectangular sanding sheets that are good for fitting into corners, but they must sand with the grain pattern of your workpiece. Sanders for 8"-long sheets only move back and forth; they’re known as inline sanders. Those for 7"-long sheets move in an orbital motion and are known as jitterbug sanders.
Sanders with a 3/8" stroke length are good for aggressive sanding that produces a rough finish (best for grits 16 to 80), such as grinding and deburring. Sanders with a 3/16" stroke length work for general purpose sanding (best for grits 100 to 240), such as deburring, texturing, and adding smooth finishes. Sanders with a 3/32" stroke length are for ultra-fine sanding (best for grits greater than 280), including extra-smooth finishing and polishing.
Add a debris collection system to keep the area clean. If you’re using them in a hazardous location where large amounts of debris could be flammable, be sure to use a system that’s certified for your location.
For Disc | For Sheet | Spindle | Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stroke Lg. | Dia. | Mount Type | Lg. | Wd. | Max. No-Load Speed | Power, hp | Thread Size | Gender | Average Air Consumption @ Pressure | O'all Lg. | Wt. | Pipe Size | Thread Type | Gender | Includes | Each | |
Disc | |||||||||||||||||
3/16" | 5" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | Solenoid Valve with Wire Leads | 00000000 | 000000000 |
3/16" | 6" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | Solenoid Valve with Wire Leads | 00000000 | 00000000 |
3/32" | 5" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | Solenoid Valve with Wire Leads | 00000000 | 00000000 |
3/32" | 6" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | Solenoid Valve with Wire Leads | 00000000 | 00000000 |
Sheet | |||||||||||||||||
3/8" | __ | __ | 8" | 2 3/4" | 2,400 strokes/min. | 0.3 | __ | __ | 18 cfm @ 90 psi | 5 1/4" | 3.7 lbs. / 1.7 kg | 1/4 | NPT | Female | Solenoid Valve with Wire Leads | 00000000 | 00000000 |
3/32" | __ | __ | 7" | 3 2/3" | 10,000 rpm | 0.28 | __ | __ | 18 cfm @ 90 psi | 5 1/4" | 2.4 lbs. / 1 kg | 1/4 | NPT | Female | Solenoid Valve with Wire Leads | 00000000 | 00000000 |
Bolt Circle Dia. (Mount. Hole Pattern Compatibility) | Mounting Fasteners Included | Mounting Plate Dia., mm | Max. Load Cap. | Wt. | Lg., mm | Each | |
Low Profile—Black PTFE-Coated Aluminum | |||||||
---|---|---|---|---|---|---|---|
31.5 mm (ISO 31.5) 40 mm (ISO 40) 50 mm (ISO 50) | Yes | 83 | 110 lbs. / 50 kg | 0.53 lbs. / 0.24 kg | 19 | 00000000 | 0000000 |
Mounting Plate | |||||||
---|---|---|---|---|---|---|---|
Bolt Hole Thread Size (No. of Holes) | Mounting Fasteners Included | Lg., mm | Wd., mm | Wt. | Lg., mm | Each | |
Low Profile—Black PTFE-Coated Aluminum | |||||||
M6 (4) | No | 62 | 38 | 0.16 lbs. / 0.07 kg | 12 | 00000000 | 000000 |
Female Threaded Air Connection | Female Quick-Disconnect Air Connection | Male Threaded Air Connection | Male Quick-Disconnect Air Connection | ||||||
---|---|---|---|---|---|---|---|---|---|
Pipe Size | Thread Type | Coupling Size | Quick-Disconnect Shape | Pipe Size | Thread Type | Coupling Size | Quick-Disconnect Shape | Each | |
1/4 | NPT | 1/4 | Industrial | 1/4 | NPT | 1/4 | Industrial | 00000000 | 000000 |
For Disc | For Sheet | Spindle | Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stroke Lg. | Dia. | Mount Type | Lg. | Wd. | Max. No-Load Speed | Power, hp | Thread Size | Gender | Average Air Consumption @ Pressure | O'all Lg. | Wt. | Pipe Size | Thread Type | Gender | Each | |
Disc | ||||||||||||||||
3/16" | 5" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | 00000000 | 000000000 |
3/16" | 6" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | 00000000 | 00000000 |
3/32" | 5" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | 00000000 | 00000000 |
3/32" | 6" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | 00000000 | 00000000 |
Sheet | ||||||||||||||||
3/8" | __ | __ | 8" | 2 3/4" | 2,400 strokes/min. | 0.3 | __ | __ | 18 cfm @ 90 psi | 5 1/4" | 3.7 lbs. / 1.7 kg | 1/4 | NPT | Female | 00000000 | 00000000 |
3/32" | __ | __ | 7" | 3 2/3" | 10,000 rpm | 0.28 | __ | __ | 18 cfm @ 90 psi | 5 1/4" | 2.4 lbs. / 1 kg | 1/4 | NPT | Female | 00000000 | 00000000 |
More durable than our Light Duty Grinders, these are designed for more frequent use.
Grinders have an angled head for accessing hard-to-reach places and a threaded spindle. They have a lever lock to prevent accidental start-up.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Inlet | Speed Control | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wheel Dia. | Max. Speed, rpm | Power, hp | For Arbor Hole Size | Airflow | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Type | Switch Type | O'all Lg. | Wt., lbs. | Each | |
4" | 11,000 | 3/4 | 3/8"-24 | 12 cfm @ 90 psi | Front | NPT | 1/4 | 3/8" | Variable | Lever | 9" | 4 | 00000000 | 0000000 |
7" | 4,500 | 1 | 5/8"-11 | 12 cfm @ 90 psi | Front | NPT | 1/4 | 3/8" | Variable | Lever | 12" | 5 3/4 | 00000000 | 000000 |
Rated for continuous use to take on tough jobs, these grinders have heavy duty gears for smooth operation and long tool life.
Grinders have an angled head for accessing hard-to-reach places and a threaded spindle. They have a lever lock to prevent accidental start-up.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Inlet | Speed Control | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wheel Dia. | Max. Speed, rpm | Power, hp | For Arbor Hole Size | Airflow | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Type | Switch Type | O'all Lg. | Wt., lbs. | Each | |
4" | 12,000 | 1 | 3/8"-24 | 17 cfm @ 90 psi | Rear | NPT | 3/8 | 3/8" | Variable | Lever | 9 1/4" | 3 3/4 | 0000000 | 0000000 |
4 1/2" | 12,000 | 1 | 5/8"-11 | 17 cfm @ 90 psi | Rear | NPT | 3/8 | 3/8" | Variable | Lever | 9 1/4" | 3 3/4 | 0000000 | 000000 |
Use these grinders for light, intermittent grinding and sanding.
Grinders have an angled head for accessing hard-to-reach places and a threaded spindle. They have a lever lock to prevent accidental start-up.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Inlet | Speed Control | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wheel Dia. | Max. Speed, rpm | Power, hp | For Arbor Hole Size | Airflow | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Type | Switch Type | O'all Lg. | Wt., lbs. | Each | |
4" | 11,000 | 3/4 | 3/8"-24 | 6 cfm @ 90 psi | Front | NPT | 1/4 | 3/8" | Variable | Lever | 9" | 4 | 00000000 | 0000000 |