Adjust and maintain the pressure of your compressed air—joiner clamps connect these regulators into your ARO setup.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Designed for installation directly to your air-powered tool, these regulators maintain the set air pressure.

Use these regulators to adjust and maintain the pressure of your tubing air lines.

A pressure-calibrated dial on these regulators allows for easy adjustments to outlet pressure in high-flow applications.

Mount these regulators to a 35 mm DIN rail with the included brackets. Use them to adjust and maintain the pressure of your compressed air.

A 316 stainless steel housing allows these regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

View and control output pressure remotely and at the source.

Mount these regulators to a 35 mm DIN rail with the included bracket. Designed for control applications that require high reliability and repeatability, they translate electrical signals to output pressure.

Fit these regulators in tight spaces to adjust and maintain air pressure in sensitive applications where constant, consistent pressure is important to generate precise force and movement.

Mount these regulators to a 35 mm DIN rail with the included bracket.

Prevent unintentional or unauthorized pressure changes in lines that demand constant, consistent air pressure. These regulators have a tamper-resistant cover that threads over the adjusting screw to block access.

Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.

Use a single air supply to meet the pressure requirements of multiple applications—connect one of these manifolds to your air line, and then set a different output pressure for each station.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.

A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets.

A cast iron body absorbs vibration from pressure changes to reduce wear and noise in your pipeline.

Often used in wet conditions and harsh environments, these valves have a 316 stainless steel body for excellent corrosion resistance.

To maintain contaminant-free standards in clean room environments, these valves come cleaned and bagged to Fed. Std. Class 100 and ISO Class 5 clean room standards and have a 316 stainless steel body with a smooth finish to resist dust collection.

Prevent changes to your pressure setting—these valves come set at a nonadjustable outlet pressure.

Valves have a brass body and NPT connections.

Rated for more than double the temperature of standard pressure-regulating valves, these can withstand temperatures up to 550° F.

Change outlet pressure without using a gauge—turn the dial to adjust the outlet pressure in 5 or 10 psi increments.

Excellent performance at low pressures.

Regulate pressure in air and inert gas systems from your instrument panel—these valves have threads below the adjustment knob and come with a panel-mount nut.

Commonly used for oxygen service and other high-purity applications, these valves come cleaned and bagged to prevent contamination.

Maintain contaminant-free standards in clean room environments. These valves come cleaned and bagged to Fed. Spec. Class 100 and ISO Class 5 clean room standards and have a 316 stainless steel body with a smooth finish to resist dust collection.

Valves have a brass body.

Regulate air, gas, and liquid pressure on food, beverage, and pharmaceutical lines with these valves—they’re 3-A certified to meet sanitary design standards.

Body is cast iron.

Designed for oxygen service and other high-purity applications, these valves can withstand the extreme cold of liquid argon, liquid carbon dioxide, liquid nitrogen, and liquid oxygen.

For a longer service life than standard valves for cryogenic liquids, these have a durable bronze body. They’re for use with liquid argon, liquid carbon dioxide, liquid nitrogen, and liquid oxygen.

These valves meet NSF/ANSI 61 for use in drinking water systems.

Compression fittings bite down on hard metal and plastic tubing for a tighter seal than push-to-connect fittings.

These valves have a brass body.

A lighter and more corrosion-resistant alternative to metal vacuum-regulating valves.