Filter by
Manufacturer
For Manufacturer
System of Measurement
Bit Shank Size
Drill Chuck Mount Type
Shank Type
Chuck Type
For Use With
Jaw Material
Mounting Hole Thread Size
For Holding
Body Material
Manufacturer Model Number
DFARS Specialty Metals
REACH
Shank Diameter
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
RoHS
Material
Thread Size
For Tool Drive Direction
Export Control Classification Number (ECCN)
Jacobs Taper Drive Type
Albrecht Taper-Mount Keyless Drill Chucks
A self-tightening design causes these chucks to grip tighter as torque increases, which prevents tool-shank slippage and allows for precise drilling. They require an arbor (sold separately).
Also Available: Replacement hoods, ball bearing sets, collars, jaws sets, jaw guides, shells, drive pins, and body and spindle assemblies. Select 2825A6 and specify replacement part and Albrecht model number.
Drill Chucks
Jacobs Taper Mount
For Bit Shank Size | Jacobs Taper | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Inch | mm | Number | Drive Type | Body Material | Jaw Material | Max. No-Load Speed, rpm | Manufacturer Model Number | Each | |
Albrecht | |||||||||
| 0.008"-1/16" | 0-1.5 | 0 | Standard | Steel | Steel | 50,000 | C15-J0 | 2823A11 | 0000000 |
| 0.015"-1/8" | 0-3 | 0 | Standard | Steel | Steel | 35,000 | C30-J0 | 2823A12 | 000000 |
| 0.015"-1/8" | 0-3 | 1 | Standard | Steel | Steel | 35,000 | C30-J1 | 2823A13 | 000000 |
| 0.015"-1/4" | 0-6.5 | 1 | Standard | Steel | Steel | 20,000 | C65-J1 | 2823A15 | 000000 |
| 0.015"-3/8" | 0-10 | 2 | Standard | Steel | Steel | 12,000 | C100-J2 | 2823A18 | 000000 |
| 0.015"-3/8" | 0-10 | 33 | Standard | Steel | Steel | 12,000 | C100-J33 | 2823A17 | 000000 |
| 1/32"-1/2" | 1-13 | 2 | Standard | Steel | Steel | 7,000 | C130-J2 | 2823A21 | 000000 |
| 1/32"-1/2" | 1-13 | 6 | Standard | Steel | Steel | 7,000 | C130-J6 | 2823A22 | 000000 |
| 1/32"-1/2" | 1-13 | 33 | Standard | Steel | Steel | 7,000 | C130-J33 | 2823A19 | 000000 |
| 1/8"-5/8" | 3-16 | 6 | Standard | Steel | Steel | 4,000 | C160-J6 | 2823A23 | 000000 |
Replacement Parts for Albrecht Taper-Mount Keyless Drill Chucks
Ball Bearing Set
Body and Spindle Assembly
Drive Pin
Hood
Jaw Guide
Jaw Set
| For Manufacturer Model Number | Each | |
Albrecht | ||
|---|---|---|
Ball Bearing Set | ||
| C15-J0 | 2825A83 | 000000 |
| C30-J0, C30-J1 | 2825A84 | 00000 |
| C65-J1 | 2825A86 | 00000 |
| C100-J2, C100-J33 | 2825A88 | 00000 |
| C130-J2, C130-J6, C130-J33 | 2825A12 | 00000 |
| C160-J6 | 2825A13 | 00000 |
Body and Spindle Assembly | ||
| C15-J0 | 2825A62 | 000000 |
| C30-J0, CH30-J0 | 2825A63 | 000000 |
| C30-J1 | 2825A64 | 000000 |
| C65-J1 | 2825A19 | 000000 |
| C100-J2 | 2825A68 | 000000 |
| C100-J33 | 2825A67 | 000000 |
| C130-J2 | 2825A22 | 000000 |
| C130-J6 | 2825A23 | 000000 |
| C130-J33 | 2825A21 | 000000 |
| C160-J6 | 2825A24 | 000000 |
Collar | ||
| C15-J0 | 2825A43 | 000000 |
| C30-J0, C30-J1 | 2825A4 | 000000 |
| C65-J1 | 2825A46 | 00000 |
| C100-J2, C100-J33 | 2825A48 | 00000 |
| C130-J2, C130-J6, C130-J33 | 2825A14 | 00000 |
| C160-J6 | 2825A15 | 00000 |
Drive Pin | ||
| C15-J0 | 2825A01 | 00000 |
| C30-J0, C30-J1 | 2825A02 | 00000 |
| C65-J1 | 2825A04 | 00000 |
| C100-J2, C100-J33 | 2825A06 | 00000 |
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A07 | 00000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A08 | 00000 |
Hood | ||
| C15-J0 | 2825A49 | 000000 |
| C30-J0, C30-J1 | 2825A51 | 000000 |
| C65-J1 | 2825A53 | 000000 |
| C100-J2, C100-J33 | 2825A56 | 000000 |
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A11 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A57 | 000000 |
Jaw Guide | ||
| C15-J0 | 2825A25 | 000000 |
| C30-J0, C30-J1 | 2825A26 | 000000 |
| C65-J1 | 2825A28 | 000000 |
| C100-J2, C100-J33 | 2825A16 | 000000 |
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A17 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A18 | 000000 |
Jaw Set | ||
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A77 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A78 | 000000 |
Shell | ||
| C15-J0 | 2825A91 | 00000 |
| C30-J0, C30-J1 | 2825A92 | 00000 |
| C65-J1 | 2825A94 | 00000 |
| C100-J2, C100-J33 | 2825A96 | 00000 |
| C130-J2, C130-J6, C130-J33 | 2825A97 | 00000 |
| C160-J6 | 2825A98 | 00000 |
Corrosion-Resistant Thread-Mount Keyless Drill Chucks
Threaded Mount
Made of stainless steel, these chucks are rust and corrosion resistant. A self-tightening design causes them to grip tighter as torque increases, which prevents tool-shank slippage and allows for precise drilling. They mount directly onto your machine’s threaded spindle.
For Bit Shank Size | ||||||||
|---|---|---|---|---|---|---|---|---|
| Inch | mm | Mounting Hole Thread Size  | Body Material | Jaw Material | Max. No-Load Speed, rpm | Manufacturer Model Number | Each | |
Albrecht | ||||||||
| 0"-1/8" | 0-3 | 3/8"-24 | 440B Stainless Steel | 440B Stainless Steel | 7,500 | CS30- 3/8" | 8890A44 | 0000000 |
| 1/32"-1/4" | 0.6-7.4 | 3/8"-24 | 440B Stainless Steel | 440B Stainless Steel | 5,000 | CS50- 3/8" | 8890A55 | 000000 |
Keyless Drill Chucks with Integral Arbor
The integral arbor is more rigid for greater accuracy than a drill chuck used with a separate arbor.
R8 taper spindles are often found on manual milling machines.
Also Available: Replacement hoods, ball bearing sets, collars, jaws sets, jaw guides, shells, and drive pins. Select 30075A6 and specify replacement part and Albrecht model number.
With Morse Taper Shank
Drill Chuck
with Morse
Taper Shank
with Morse
Taper Shank
Morse Taper | For Bit Shank Size | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Number | Dia. | Inch | mm | Body Material | Jaw Material | Max. No-Load Speed, rpm | Manufacturer Model Number | Each | |
Albrecht | |||||||||
| 2 | 0.7" | 1/32"-1/2" | 1-13 | Steel | Steel | 7,000 | CP130-2MT | 30075A45 | 0000000 |
| 3 | 0.938" | 1/32"-1/2" | 1-13 | Steel | Steel | 7,000 | CP130-3MT | 30075A46 | 000000 |
| 3 | 0.938" | 1/8"-5/8" | 3-16 | Steel | Steel | 4,000 | CP160-3MT | 30075A54 | 000000 |
| 4 | 1.231" | 1/32"-1/2" | 1-13 | Steel | Steel | 7,000 | CP130-4MT | 30075A47 | 000000 |
| 4 | 1.231" | 1/8"-5/8" | 3-16 | Steel | Steel | 4,000 | CP160-4MT | 30075A56 | 000000 |
With Straight Shank
Drill
Chuck with
Straight Shank
Chuck with
Straight Shank
For Bit Shank Size | ||||||||
|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Inch | mm | Body Material | Jaw Material | Max. No-Load Speed, rpm | Manufacturer Model Number | Each | |
Albrecht | ||||||||
| 5/8" | 1/32"-1/2" | 1-13 | Steel | Steel | 7,000 | CP130- 5/8 | 30075A49 | 0000000 |
Replacement Parts for Keyless Drill Chucks
Ball Bearing Set
Collar
Drive Pin
Hood
Jaw Guide
Jaw Set
Shell
| For Manufacturer Model Number | Each | |
Albrecht | ||
|---|---|---|
Ball Bearing Set | ||
| CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A33 | 000000 |
| C160-J6 | 2825A13 | 00000 |
Collar | ||
| CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A32 | 00000 |
| C160-J6 | 2825A15 | 00000 |
Drive Pin | ||
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A07 | 00000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A08 | 00000 |
Hood | ||
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A11 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A57 | 000000 |
Jaw Guide | ||
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A17 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A18 | 000000 |
Jaw Set | ||
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A77 | 000000 |
| C160-J6, CP160-3MT, CP160-4MT, CP160-R8 | 2825A78 | 000000 |
Shell | ||
| CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A31 | 00000 |
| CP160-3MT, CP160-4MT, CP160-R8 | 2825A35 | 00000 |
Parts for Albrecht Keyless Drill Chucks
Ball Bearing Set
Body and Spindle Assembly
Collar
Drive Pin
Hood
Jaw Guide
Jaw Set
Shell
Replace worn-out components to extend the life of your Albrecht keyless drill chuck.
| For Manufacturer Model Number | Each | |
Albrecht | ||
|---|---|---|
Ball Bearing Set | ||
| C15-J0, CH15-J0 | 2825A83 | 000000 |
| C30-J0, CH30-J0, C30-J1, CH30-J1 | 2825A84 | 00000 |
| C65-J1 | 2825A86 | 00000 |
| C100-J2, C100-J33 | 2825A88 | 00000 |
| C130-J2, C130-J6, CD130-J6, C130-J33, CD130-J33 | 2825A12 | 00000 |
| C160-J6 | 2825A13 | 00000 |
| CP130-2MT, CPD130-2MT, CP130-3MT, CPD130-3MT, CP130-4MT, CPD130-4MT, CP130-5/8, CPD130-5/8, CP130-R8, CPD130-R8 | 2825A33 | 00000 |
Body and Spindle Assembly | ||
| C15-J0, CH15-J0 | 2825A62 | 000000 |
| C30-J0, CH30-J0 | 2825A63 | 000000 |
| C30-J1, CH30-J1 | 2825A64 | 000000 |
| C65-J1 | 2825A19 | 000000 |
| C100-J2 | 2825A68 | 000000 |
| C100-J33 | 2825A67 | 000000 |
| C130-J2 | 2825A22 | 000000 |
| C130-J6, CD130-J6 | 2825A23 | 000000 |
| C130-J33, CD130-J33 | 2825A21 | 000000 |
| C160-J6 | 2825A24 | 000000 |
Collar | ||
| C15-J0, CH15-J0 | 2825A43 | 000000 |
| C30-J0, CH30-J0, C30-J1, CH30-J1 | 2825A4 | 000000 |
| C65-J1 | 2825A46 | 00000 |
| C100-J2, C100-J33 | 2825A48 | 00000 |
| C130-J2, C130-J6, CD130-J6, C130-J33, CD130-J33 | 2825A14 | 00000 |
| C160-J6 | 2825A15 | 00000 |
| CP130-2MT, CPD130-2MT, CP130-3MT, CPD130-3MT, CP130-4MT, CPD130-4MT, CP130-5/8, CPD130-5/8, CP130-R8, CPD130-R8 | 2825A32 | 00000 |
Drive Pin | ||
| C15-J0, CH15-J0 | 2825A01 | 00000 |
| C30-J0, CH30-J0, C30-J1, CH30-J1 | 2825A02 | 00000 |
| C65-J1 | 2825A04 | 00000 |
| C100-J2, C100-J33 | 2825A06 | 00000 |
| C130-J2, C130-J6, CD130-J6, C130-J33, CD130-J33, CP130-2MT, CPD130-2MT, CP130-3MT, CPD130-3MT, CP130-4MT, CPD130-4MT, CP130-5/8, CPD130-5/8, CP130-R8, CPD130-R8 | 2825A07 | 00000 |
| C160-J6, CP160-2MT, CP160-3MT, CP160-4MT, CP160-R8 | 2825A08 | 00000 |
Hood | ||
| C15-J0, CH15-J0 | 2825A49 | 000000 |
| C30-J0, CH30-J0, C30-J1, CH30-J1 | 2825A51 | 000000 |
| C65-J1 | 2825A53 | 000000 |
| C100-J2, C100-J33 | 2825A56 | 000000 |
| C130-J2, C130-J6, CD130-J6, C130-J33, CD130-J33, CP130-2MT, CPD130-2MT, CP130-3MT, CPD130-3MT, CP130-4MT, CPD130-4MT, CP130-5/8, CPD130-5/8, CP130-R8, CPD130-R8 | 2825A11 | 000000 |
| C160-J6, CP160-2MT, CP160-3MT, CP160-4MT, CP160-R8 | 2825A57 | 000000 |
Jaw Guide | ||
| C15-J0, CH15-J0 | 2825A25 | 000000 |
| C30-J0, CH30-J0, C30-J1, CH30-J1 | 2825A26 | 000000 |
| C65-J1 | 2825A28 | 000000 |
| C100-J2, C100-J33 | 2825A16 | 000000 |
| C130-J2, C130-J6, CD130-J6, C130-J33, CD130-J33, CP130-2MT, CPD130-2MT, CP130-3MT, CPD130-3MT, CP130-4MT, CPD130-4MT, CP130-5/8, CPD130-5/8, CP130-R8, CPD130-R8 | 2825A17 | 000000 |
| C160-J6, CP160-2MT, CP160-3MT, CP160-4MT, CP160-R8 | 2825A18 | 000000 |
Jaw Set | ||
| C130-J2, C130-J6, C130-J33, CP130-2MT, CP130-3MT, CP130-4MT, CP130-5/8, CP130-R8 | 2825A77 | 000000 |
| C160-J6, CP160-2MT, CP160-3MT, CP160-4MT, CP160-R8 | 2825A78 | 000000 |
Shell | ||
| C15-J0, CH15-J0 | 2825A91 | 00000 |
| C30-J0, CH30-J0, C30-J1, CH30-J1 | 2825A92 | 00000 |
| C65-J1 | 2825A94 | 00000 |
| C100-J2, C100-J33 | 2825A96 | 00000 |
| C130-J2, C130-J6, CD130-J6, C130-J33, CD130-J33 | 2825A97 | 00000 |
| C160-J6 | 2825A98 | 00000 |
| CP130-2MT, CPD130-2MT, CP130-3MT, CPD130-3MT, CP130-4MT, CPD130-4MT, CP130-5/8, CPD130-5/8, CP130-R8, CPD130-R8 | 2825A31 | 00000 |
| CP160-2MT, CP160-3MT, CP160-4MT, CP160-R8 | 2825A35 | 00000 |