Use this low-VOC paint in enclosed spaces to stop rust from starting and prevent existing rust from spreading.

Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.

Match the manufacturers’ color of your lift, jack, or motor to cover scratches and wear. This paint resists oil, gas, heat, and sunlight for use in demanding environments.

Match the manufacturers' color of your forklift, lift truck, or pallet truck to cover scratches and wear.

Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

This paint is formulated for use in enclosed spaces.

Make items stand out under emergency lighting or in low-light environments.

Create a washable writing surface.

Unlike other marking paint, this paint sprays in the upright position and dries fast, so it won't drip when applied overhead.

Marks made with this paint fade in approximately 30 days when exposed to sunlight and traffic.

This water-based paint will not harm grass or other plant life.

Spray this paint onto trees, logs, or cut wood—even in the rain—to create a bright mark that can be seen at a distance. This paint mixes with the water in wet wood and allows it to penetrate the surface.

Stain and seal in one application to protect and refresh the appearance of wood surfaces.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention.

Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.

Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.

These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications.

Spray these coatings on glass to create a clear, scratch-resistant surface that repels oil and water. They’re also known as oleophobic and hydrophobic coatings.

Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water.

These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.

Use these coatings on nonporous surfaces that need to withstand high-pressure washdowns. They contain 316 stainless steel flakes, which provide durability and superior corrosion and impact resistance.

These two-part epoxy coatings resist chemicals and other solvents. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.

More durable and scratch resistant than liquid paint, use this dry paint with your powder coating system.

Tough and long-lasting, these flexible coatings protect against rust and corrosion.

Also known as brushable ceramic, these coatings create a hard, low-friction surface. They're often used on liquid processing equipment to protect worn areas and reduce turbulence.

These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.

Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. Once removed, coatings can be melted again for repeat use.

These coatings reflect up to 60% of the sun's rays. They also restore and reinforce your roof by forming a water-resistant seal.

Stop fabric from fading in the sun. These coatings also protect against spots, spills, and stains.

Also known as neatsfoot oil, use these to recondition, waterproof, and preserve leather.

Protect steel and iron parts from corrosion without having to remove the primer before welding them together. Often used on structural steel in demanding environments, these primers can be welded through without affecting the weld’s integrity.

Extend the life of your paint and coatings on damage-prone metal surfaces. When scratched or worn, these primers release small capsules of uncured primer to provide continued corrosion resistance.

These primers stand up to marine exposure and salt spray. Use them to prepare your surface to extend the life of paint and coatings.

A high concentration of zinc gives these primers excellent corrosion resistance for protecting steel—when exposed to moisture and chemicals, the zinc rusts before the underlying steel can. They’re often used with structural steel.

These primers fill surface cracks and are sandable for a smooth basecoat. Use them to prepare your surface to extend the life of paint and coatings.

These primers have excellent adhesion to plastic. Use them to prepare your surface to extend the life of paint and coatings.

Avoid the fumes and strong smell of traditional thinners with these odorless thinners. They’re often used for cleanup and to thin paint for spray applications.

These thinners are often used for cleanup and to thin paint for spray applications.

Strip up to 10 layers of epoxy, polyurethane, and marine coatings at once. Use these removers to prepare surfaces for refinishing.

Strip paint, varnish, and urethane, penetrating several layers at once.