The standard for high-strength fastening.

These screws are specially tempered to meet ASTM A193 specifications for temperatures up to 1100° F.

Tighten these screws by turning them to the left; once fastened, they prevent counterclockwise-moving parts from loosening.

Insert these plugs into the drive socket to block debris and provide a finished look.

Cleaned and double bagged in an ISO Class 5 (Fed. Std. Class 100) clean room, these screws are ready to use on chambers and components in high-vacuum systems.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water.

Often used to fasten parts in engines and turbines, these are our strongest stainless steel screws. They are comparable in strength to alloy steel with the corrosion resistance of 18-8 stainless steel.

Plastic screws are chemical and oil resistant, nonconductive, and lightweight.

More corrosion resistant than stainless steel screws, nickel alloy screws have excellent resistance to salt water and some acids.

Bronze screws are about 40% stronger than brass screws and provide more corrosion resistance to salt water, gases, and sewage. They are nonmagnetic and electrically conductive.

Nearly as strong as steel, these stainless steel screws won’t rust in outdoor, washdown, and other corrosive environments. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

Made from alloy steel, these screws are nearly twice as strong as stainless steel low-profile screws. With a head height one-third the size of a standard socket head, they fit in the tightest spaces.

With a head one and a half times taller than a standard socket head, these screws are easier to install in deep counterbored holes and other hard-to-reach places.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They have a thread locker to resist vibration.

Stainless steel screws have excellent corrosion resistance in most environments. Wire these screws together for more vibration resistance than other types of socket head screws.

With a tensile strength of 180,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and more than two and a half times stronger than stainless steel screws with split lock washer. The split lock washer helps to resist vibration.

For use where sideways forces are a concern, these screws have a precisely measured unthreaded portion (grip) for a strong hold. Their flanged head distributes pressure where the screw meets the surface, so you don't need a washer.

Serrations under the head grip the material's surface for mild vibration resistance. The flange distributes pressure across the material's surface, eliminating the need for a washer.

Drilled through the head and shaft, these screws vent fluid and gases trapped below the screw, making them good for vacuum applications.

A freely rotating washer distributes pressure over a wider area than a flange, preventing damage to your material's surface.

Nonconductive and softer than brass, the nylon tip reduces vibration and eliminates damage from metal touching metal.

Choose these screws for their adherence to strict military standards for material and construction.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

More corrosion resistant than 18-8 stainless steel screws, these metric screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Choose these screws for their adherence to strict military standards for material and construction.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

To vent fluids and gases trapped under the screw, these metric screws are drilled through the shaft.

These screws are drilled through the shaft to vent fluids and gases trapped under the screw.

A tamper-resistant hex drive (also known as pin-in hex drive) makes these screws difficult to remove without special tools.

18-8 stainless steel button head screws have good chemical resistance and may be mildly magnetic.

More corrosion resistant than 18-8 stainless steel screws, these button head screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Closely spaced threads on these screws fit in holes with a fine pitch. They're not compatible with standard metric threads.

These metric alloy steel screws are nearly twice as strong as stainless steel button head screws.

As strong as alloy steel and about 40% lighter, these metric titanium screws are known for their high strength-to-weight ratio. They stand up to salt water, acids, and chemicals.

Made from brass, these metric button head screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer.

18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. The flange distributes pressure across a wide surface, eliminating the need for a separate washer.