Application Application |
|---|
|
Material Material |
|---|
|
Flame-Resistant Application Flame-Resistant Application |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Closure Type Closure Type |
|---|
|
Lining Material Lining Material |
|---|
|
About Glove Sizing
More
Heat-Reflective Aluminized Jackets
Often used in steel mills and glass plants, aluminized clothing reflects radiant heat and protects against sparks. These jackets have no pockets so they won’t trap hot particles. They have snaps down the front and on the cuffs. A flap down the front has pull tabs to allow for quick removal.
Rayon provides good radiant-heat protection as well as moderate spark protection and protection against molten metal splashes.
Kevlar aramid/fiberglass blend combines good heat resistance with excellent abrasion and cut resistance, in addition to offering protection against molten metal splashes.
PBI/Kevlar aramid blend is lighter than other Kevlar blends. It provides excellent heat and abrasion resistance without weighing you down.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It holds up in higher temperatures than other materials while providing excellent abrasion and cut resistance. It provides protection against molten metal splashes.
When measuring chest size, measure around the fullest part of your chest. Jackets are oversized to fit over work clothes; take all measurements over any clothing you expect to wear under the jacket.
Available Sizes | ||
|---|---|---|
| Size | Chest Size | Lg. |
| S | 36"/38" | 30" |
| M | 40"/42" | 30" |
| L | 44"/46" | 30" |
| XL | 48"/50" | 30" |
| 2XL | 52"/54" | 30" |
Heat-Reflective Aluminized Coats
Often used in steel mills and glass plants, aluminized clothing reflects radiant heat and protects against sparks. These coats have no pockets so they won’t trap hot particles. They have snaps down the front and on the cuffs. A flap down the front has pull tabs to allow for quick removal.
Rayon provides good radiant-heat protection as well as moderate spark protection and protection against molten metal splashes.
Kevlar aramid/fiberglass blend combines good heat resistance with excellent abrasion and cut resistance, in addition to offering protection against molten metal splashes.
PBI/Kevlar aramid blend is lighter than other Kevlar blends. It provides excellent heat and abrasion resistance without weighing you down.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It holds up in higher temperatures than other materials while providing excellent abrasion and cut resistance. It provides protection against molten metal splashes.
When measuring chest size, measure around the fullest part of your chest. Coats are oversized to fit over work clothes; take all measurements over any clothing you expect to wear under the coat.
Available Sizes | ||
|---|---|---|
| Size | Chest Size | Lg. |
| S | 36"/38" | 50" |
| M | 40"/42" | 50" |
| L | 44"/46" | 50" |
| XL | 48"/50" | 50" |
| 2XL | 52"/54" | 50" |
Heat-Reflective Aluminized Pants
Often used in steel mills and glass plants, aluminized clothing reflects radiant heat and protects against sparks. These pants have no pockets so they won’t trap hot particles. They have durable leather belt loops, as well as buttons for suspenders. Cuffs are open to fit over boots.
Rayon provides good radiant-heat protection as well as moderate spark protection and protection against molten metal splashes.
Kevlar aramid/fiberglass blend combines good heat resistance with excellent abrasion and cut resistance, in addition to offering protection against molten metal splashes.
PBI/Kevlar aramid blend is lighter than other Kevlar blends. It provides excellent heat and abrasion resistance without weighing you down.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It holds up in higher temperatures than other materials while providing excellent abrasion and cut resistance. It provides protection against molten metal splashes.
Find your waist size by measuring just above the top of your hip bone. Pants are oversized to fit over work clothes; take all measurements over any clothing you expect to wear under the pants.
Available Sizes | ||
|---|---|---|
| Size | Waist Size | Inseam Lg. |
| S | 30"-32" | 32" |
| M | 34"-36" | 32" |
| L | 38"-40" | 32" |
| XL | 42"-44" | 32" |
| 2XL | 46"-48" | 32" |
| Material | Closure Type | Cuff Style | Features | Color | Choose a Size | Each | |
| Rayon Fabric | Snaps | Open | Leather Belt Loops | Silver | 000000 | 0000000 | |
| Kevlar Aramid/Fiberglass Fabric Blend | Snaps | Open | Leather Belt Loops | Silver | 000000 | 000000 | |
| PBI/Kevlar Aramid Fabric Blend | Snaps | Open | Leather Belt Loops | Silver | 000000 | 000000 | |
| Carbon/Kevlar Aramid Fabric Blend | Snaps | Open | Leather Belt Loops | Silver | 000000 | 000000 |
Heat-Reflective Aluminized Leggings
Often used in steel mills and glass plants, aluminized clothing reflects radiant heat and protects against sparks and molten metal splashes. These leggings protect your shins and the top of your feet. They have a hook and loop closure to adjust the fit and a pull tab for quick removal.
Rayon provides good radiant-heat protection as well as moderate spark protection.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than rayon. It holds up in higher temperatures than rayon while providing excellent abrasion and cut resistance.
Heat-Reflective Aluminized Aprons
Often used in steel mills and glass plants, aluminized clothing reflects radiant heat and protects against sparks. These aprons have no pockets so they won’t trap hot particles. They have adjustable neck and waist straps to modify the fit. The straps snap on and off so you can remove them quickly.
Rayon provides good radiant-heat protection as well as moderate spark protection and protection against molten metal splashes.
Kevlar aramid/fiberglass blend combines good heat resistance with excellent abrasion and cut resistance, in addition to offering protection against molten metal splashes.
PBI/Kevlar aramid blend is lighter than other Kevlar blends. It provides excellent heat and abrasion resistance without weighing you down.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It holds up in higher temperatures than other materials while providing excellent abrasion and cut resistance. It provides protection against molten metal splashes.
| Lg. | Wd. | Closure Type | Features | Color | Size | Each | |
Rayon Fabric | |||||||
|---|---|---|---|---|---|---|---|
| 39" | 24" | Snaps | Adjustable Neck Strap, Adjustable Waist Strap | Silver | One Size | 000000 | 000000 |
Kevlar Aramid/Fiberglass Fabric Blend | |||||||
| 30" | 24" | Snaps | Adjustable Neck Strap, Adjustable Waist Strap | Silver | XS | 0000000 | 00000 |
| 39" | 24" | Snaps | Adjustable Neck Strap, Adjustable Waist Strap | Silver | M | 000000 | 00000 |
| 42" | 24" | Snaps | Adjustable Neck Strap, Adjustable Waist Strap | Silver | L | 0000000 | 00000 |
| 48" | 24" | Snaps | Adjustable Neck Strap, Adjustable Waist Strap | Silver | XL | 0000000 | 00000 |
PBI/Kevlar Aramid Fabric Blend | |||||||
| 39" | 24" | Snaps | Adjustable Neck Strap, Adjustable Waist Strap | Silver | One Size | 000000 | 00000 |
Carbon/Kevlar Aramid Fabric Blend | |||||||
| 39" | 24" | Snaps | Adjustable Neck Strap, Adjustable Waist Strap | Silver | One Size | 000000 | 00000 |
Heat-Reflective Aluminized Shrouds
Protect your neck from heat, sparks, and molten metal splashes. Often used in steel mills and glass plants, these shrouds are made of aluminized material. Use the hook and loop tabs to fasten them to a hard hat (sold separately). They have snaps in the front to close the shroud around the front of your neck.
Rayon provides good radiant-heat protection as well as moderate spark protection.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than rayon. It holds up in higher temperatures than rayon while providing excellent abrasion and cut resistance.
Aluminized Hoods for Heat Protection
Protect your head and neck from extreme heat. To fit your head, these hoods use an adjustable ratchet suspension. There's enough room inside to wear glasses, goggles, or a respirator.
Rayon provides good radiant-heat protection as well as moderate spark protection and protection against molten metal splashes.
Kevlar/Nomex aramid blend combines good heat resistance with excellent abrasion and cut resistance, in addition to offering protection against molten metal splashes.
PBI/Kevlar aramid blend is a strong, lighter weight fabric that offers good heat resistance without the bulk of other Kevlar blends.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It combines good heat resistance with excellent abrasion and cut resistance. It provides protection against molten metal splashes.
Hoods | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Lens | Replacement Face Shields | ||||||||||
| Material | Size | Color | Lg. | Color | Material | Ht. | Wd. | Each | Each | ||
| Rayon Fabric | One Size | Silver | 22" | Clear | Polycarbonate Plastic | 7" | 11" | 000000 | 0000000 | 0000000 | 000000 |
| Kevlar/Nomex Aramid Fabric Blend | One Size | Silver | 22" | Clear | Polycarbonate Plastic | 7" | 11" | 0000000 | 000000 | 0000000 | 00000 |
| PBI/Kevlar Aramid Fabric Blend | One Size | Silver | 22" | Clear | Polycarbonate Plastic | 7" | 11" | 000000 | 000000 | 0000000 | 00000 |
| Carbon/Kevlar Aramid Fabric Blend | One Size | Silver | 22" | Clear | Polycarbonate Plastic | 7" | 11" | 000000 | 000000 | 0000000 | 00000 |
Heat-Reflective Aluminized Gloves
Made of aluminized fabric, these gloves reflect radiant heat and protect against sparks. They protect your hands from intermittent exposure to extreme heat during jobs such as metal forging and glass manufacturing. All of the gloves are aluminized on the back of the cuff, hand, fingers, and thumb.
Rayon gloves are the economical choice for good radiant heat and moderate spark protection and protection against molten metal splashes.
Kevlar/Nomex aramid blend gloves combine heat-resistant fibers with the excellent abrasion resistance of Kevlar. They provide protection against molten metal splashes.
PBI/Kevlar aramid blend gloves are lighter weight than other aluminized gloves we carry. They offer good heat resistance without the bulk of other Kevlar blend gloves. They're also reinforced with Kevlar fibers for added strength.
Carbon/Kevlar aramid blend gloves are heavyweight gloves that last longer than Kevlar/Nomex aramid blend gloves in comparable service. They provide protection against molten metal splashes.
| Lg. | Cuff Style | Lining Material | Color | For Heat Exposure Type | Size | Pair | |
Rayon Fabric | |||||||
|---|---|---|---|---|---|---|---|
| 14" | Open | Wool/Cotton Fabric Blend | Silver | Direct | One Size | 000000 | 000000 |
Kevlar/Nomex Aramid Fabric Blend | |||||||
| 14" | Open | Wool/Cotton Fabric Blend | Silver | Direct | One Size | 000000 | 00000 |
PBI/Kevlar Aramid Fabric Blend | |||||||
| 14" | Open | Wool/Cotton Fabric Blend | Silver | Direct | One Size | 000000 | 00000 |
Carbon/Kevlar Aramid Fabric Blend | |||||||
| 14" | Open | Wool/Cotton Fabric Blend | Silver | Direct | One Size | 000000 | 00000 |
Welding Hand Pads
Slip these pads over gloves for additional protection against sparks and spatter. They are made from highly heat-reflective aluminized rayon and have straps to hold them in place.
Heat-Reflective Aluminized Boot Covers
Often used in steel mills, foundries, and glass plants, these covers reflect radiant heat and protect against sparks. They reach mid-calf and have a zipper down the front as well as a flame-resistant cotton lining. A skid-resistant sole grips wet and slippery surfaces for good traction.
Rayon provides good radiant heat protection and moderate spark protection and protection against molten metal splashes.
Kevlar/Nomex aramid blend combines good heat resistance with excellent abrasion and cut resistance, in addition to offering protection against molten metal splashes.
PBI/Kevlar aramid blend is lighter than other Kevlar blends. It provides excellent heat and abrasion resistance without weighing you down.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It holds up better in higher temperatures than other materials while providing excellent abrasion and cut resistance. It provides protection against molten metal splashes.
| Ht. | Closure Type | Features | Color | For Men's Shoe Size | For Women's Shoe Size | Pair | |
Rayon Fabric | |||||||
|---|---|---|---|---|---|---|---|
| 12" | Zipper | Skid-Resistant Sole | Silver | One Size | One Size | 000000 | 0000000 |
Kevlar/Nomex Aramid Fabric Blend | |||||||
| 12" | Zipper | Skid-Resistant Sole | Silver | One Size | One Size | 000000 | 000000 |
PBI/Kevlar Aramid Fabric Blend | |||||||
| 12" | Zipper | Skid-Resistant Sole | Silver | One Size | One Size | 000000 | 000000 |
Carbon/Kevlar Aramid Fabric Blend | |||||||
| 12" | Zipper | Skid-Resistant Sole | Silver | One Size | One Size | 000000 | 000000 |