Material Material | Show |
---|
|
Thickness Thickness |
---|
|
|
|
Diameter Diameter |
---|
Shape Shape |
---|
![]() | ![]() |
Sheet and Bar | Rod and Disc |
![]() | |
90° Angle |
Tolerance Rating Tolerance Rating |
---|
|
Hardness Rating Hardness Rating |
---|
|
Specifications Met Specifications Met |
---|
|
Aluminum Performance Properties Aluminum PerformanceProperties |
---|
|
Yield Strength Yield Strength |
---|
|
Heat Treatment Heat Treatment |
---|
|
Appearance Appearance |
---|
|
Certificate Certificate |
---|
![]() | Material Certificate with Traceable Lot Number |
Fabrication Fabrication |
---|
|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Heat Treatable Heat Treatable |
---|
|
Elongation Elongation |
---|
|
Mechanical Finish Mechanical Finish |
---|
|
More
Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.
Hot- and cold-rolled sheets are cut from large pieces to the widths and lengths listed, so the edges may not be parallel.
Cold-drawn bars are formed by a die for close-tolerance widths, then cut to the lengths listed.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Thick. | Thick. Tolerance | Fabrication | Heat Treatment | Temperature Range, °F | Each | |
6" × 6" | ||||||
---|---|---|---|---|---|---|
0.032" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.040" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 0000 |
0.050" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 0000 |
0.063" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 0000 |
0.090" | -0.003" to 0.003" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
1/8" | -0.004" to 0.004" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.160" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.190" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
1/4" | -0.019" to 0.019" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
3/8" | -0.022" to 0.022" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
1/2" | -0.028" to 0.028" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
3/4" | -0.031" to 0.104" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
1" | -0.039" to 0.124" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
1 1/2" | -0.039" to 0.124" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
2" | -0.055" to 0.150" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
2 1/2" | -0.075" to 0.200" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3" | -0.075" to 0.200" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
6" × 12" | ||||||
0.032" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.040" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.050" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.063" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.090" | -0.003" to 0.003" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
1/8" | -0.004" to 0.004" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.160" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.190" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
1/4" | -0.019" to 0.019" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
3/8" | -0.022" to 0.022" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
1/2" | -0.028" to 0.028" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
3/4" | -0.031" to 0.104" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
1" | -0.039" to 0.124" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
1 1/2" | -0.039" to 0.124" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
2" | -0.055" to 0.150" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
2 1/2" | -0.075" to 0.200" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
3" | -0.075" to 0.200" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
6" × 24" | ||||||
0.032" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.040" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.050" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.063" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.090" | -0.003" to 0.003" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
1/8" | -0.004" to 0.004" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.160" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.190" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
1/4" | -0.019" to 0.019" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
3/8" | -0.022" to 0.022" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
1/2" | -0.028" to 0.028" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
3/4" | -0.031" to 0.104" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
1" | -0.039" to 0.124" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
1 1/2" | -0.039" to 0.124" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
2" | -0.055" to 0.150" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
2 1/2" | -0.075" to 0.200" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
3" | -0.075" to 0.200" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
8" × 8" | ||||||
0.032" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 0000 |
0.040" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.050" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.063" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.090" | -0.003" to 0.003" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
1/8" | -0.004" to 0.004" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.160" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.190" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
1/4" | -0.019" to 0.019" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
3/8" | -0.022" to 0.022" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
1/2" | -0.028" to 0.028" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
3/4" | -0.031" to 0.104" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1" | -0.039" to 0.124" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1 1/2" | -0.039" to 0.124" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
2" | -0.055" to 0.150" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
2 1/2" | -0.075" to 0.200" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3" | -0.075" to 0.200" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
12" × 12" | ||||||
0.032" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.040" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.050" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.063" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.090" | -0.003" to 0.003" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
1/8" | -0.004" to 0.004" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.160" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.190" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
1/4" | -0.019" to 0.019" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
3/8" | -0.022" to 0.022" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1/2" | -0.028" to 0.028" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3/4" | -0.031" to 0.104" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1" | -0.039" to 0.124" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1 1/2" | -0.039" to 0.124" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
2" | -0.055" to 0.150" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
2 1/2" | -0.075" to 0.200" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3" | -0.075" to 0.200" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
12" × 24" | ||||||
0.032" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.040" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.050" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.063" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.090" | -0.003" to 0.003" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
1/8" | -0.004" to 0.004" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.160" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.190" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1/4" | -0.019" to 0.019" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3/8" | -0.022" to 0.022" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1/2" | -0.028" to 0.028" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3/4" | -0.031" to 0.104" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1" | -0.039" to 0.124" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1 1/2" | -0.039" to 0.124" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
2" | -0.055" to 0.150" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
2 1/2" | -0.075" to 0.200" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3" | -0.075" to 0.200" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
18" × 18" | ||||||
0.032" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.040" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.050" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.063" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
0.090" | -0.003" to 0.003" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 00000 |
1/8" | -0.004" to 0.004" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
0.160" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
0.190" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 00000000 | 000000 |
1/4" | -0.019" to 0.019" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3/8" | -0.022" to 0.022" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1/2" | -0.028" to 0.028" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3/4" | -0.031" to 0.104" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1" | -0.039" to 0.124" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1 1/2" | -0.039" to 0.124" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
2" | -0.055" to 0.150" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
2 1/2" | -0.075" to 0.200" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3" | -0.075" to 0.200" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
24" × 24" | ||||||
0.032" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.040" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.050" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.063" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 00000 |
0.090" | -0.003" to 0.003" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1/8" | -0.004" to 0.004" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.160" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.190" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1/4" | -0.019" to 0.019" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3/8" | -0.022" to 0.022" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1/2" | -0.028" to 0.028" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3/4" | -0.031" to 0.104" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1" | -0.039" to 0.124" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1 1/2" | -0.039" to 0.124" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
2" | -0.055" to 0.150" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
2 1/2" | -0.075" to 0.200" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 00000000 |
3" | -0.075" to 0.200" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 00000000 |
24" × 48" | ||||||
0.032" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.040" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.050" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.063" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.090" | -0.003" to 0.003" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1/8" | -0.004" to 0.004" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.160" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.190" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1/4" | -0.019" to 0.019" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3/8" | -0.022" to 0.022" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1/2" | -0.028" to 0.028" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3/4" | -0.031" to 0.104" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 00000000 |
1" | -0.039" to 0.124" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 00000000 |
48" × 48" | ||||||
0.032" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.040" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.050" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.063" | -0.002" to 0.002" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.090" | -0.003" to 0.003" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1/8" | -0.004" to 0.004" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.160" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
0.190" | -0.007" to 0.007" | Cold Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
1/4" | -0.019" to 0.019" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 000000 |
3/8" | -0.022" to 0.022" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 00000000 |
1/2" | -0.028" to 0.028" | Hot Rolled | Hardened | -320° to 210° | 0000000 | 00000000 |
Wd. | Temper | Heat Treatment | Temperature Range, °F | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/4" Thick. (-0.002" to 0.002" Tolerance) | |||||||||
---|---|---|---|---|---|---|---|---|---|
1" | T651 | Hardened | -320° to 210° | 0000000 | |||||
2" | T651 | Hardened | -320° to 210° | 0000000 | |||||
2 1/2" | T651 | Hardened | -320° to 210° | 0000000 | |||||
1/2" Thick. (-0.002" to 0.002" Tolerance) | |||||||||
1" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
1 1/2" | T651 | Hardened | -320° to 210° | 0000000 | |||||
2" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
2 1/2" | T651 | Hardened | -320° to 210° | 0000000 | |||||
3" | T651 | Hardened | -320° to 210° | 0000000 | |||||
4" | T651 | Hardened | -320° to 210° | 0000000 | |||||
3/4" Thick. (-0.003" to 0.003" Tolerance) | |||||||||
1" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
2" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
3" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
1" Thick. (-0.003" to 0.003" Tolerance) | |||||||||
1" | T651 | Hardened | -320° to 210° | 0000000 | |||||
1 1/2" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
2" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
2 1/2" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
3" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
1" Thick. (-0.0025" to 0.0025" Tolerance) | |||||||||
4" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
1 1/4" Thick. (-0.003" to 0.003" Tolerance) | |||||||||
1 1/2" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
2" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
2 1/2" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
3" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
1 1/2" Thick. (-0.003" to 0.003" Tolerance) | |||||||||
1 1/2" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
2" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
2 1/2" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
3" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
4" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
2" Thick. (-0.005" to 0.005" Tolerance) | |||||||||
2" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
2 1/2" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
3" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
4" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
2 1/2" Thick. (-0.008" to 0.008" Tolerance) | |||||||||
2 1/2" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
3" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
3" Thick. (-0.008" to 0.008" Tolerance) | |||||||||
3" | T7351 | Hardened | -320° to 210° | 0000000 | |||||
4" | T7351 | Hardened | -320° to 210° | 0000000 |
Choose between sheets and bars that are precision ground on all six sides or just on the top and bottom. Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.
Sheets and bars that are precision ground on all sides are consistently flat, square, and parallel on all six sides. They’re also known as blanks and are ready for use in your CNC machine.
Sheets and bars that are precision ground on top and bottom are also known as flat stock.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Thick. | Thick. Tolerance | Heat Treatment | Temp. Range, °F | Parallel Tolerance | Flatness Tolerance | 2" × 12" | 4" × 12" | 6” × 6” | 6” × 12” | 8" × 8" | 8" × 12" | 12" × 12" | 12” × 24” | |
3/16" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.004" | 0.010" | 0000000 | ||||||||
1/4" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.004" | 0.010" | 0000000 | ||||||||
3/8" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.004" | 0.010" | 0000000 | ||||||||
1/2" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.004" | 0.005" | 0000000 | ||||||||
5/8" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.004" | 0.005" | 0000000 | ||||||||
3/4" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.004" | 0.005" | 0000000 | ||||||||
1" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.004" | 0.005" | 0000000 | ||||||||
1 1/4" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.004" | 0.005" | 0000000 | ||||||||
1 1/2" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.004" | 0.005" | 0000000 | ||||||||
2" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.004" | 0.005" | 0000000 |
Thick. | Thick. Tolerance | Heat Treatment | Temp. Range, °F | Flatness Tolerance | 2" × 12" | 4" × 12" | 6” × 6” | 6” × 12” | 6" × 24" | 8" × 8" | 12" × 12" | 12” × 24” | 18" × 18" | 24” × 24” | |
1/4" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.010" | 0000000 | ||||||||||
3/8" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.010" | 0000000 | ||||||||||
1/2" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.005" | 0000000 | ||||||||||
5/8" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.005" | 0000000 | ||||||||||
3/4" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.005" | 0000000 | ||||||||||
1" | -0.002" to 0.002" | Hardened | -320° to 210° | 0.005" | 0000000 |
Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Dia. | Dia. Tolerance | Heat Treatment | Temperature Range, °F | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/4" | -0.002" to 0.002" | Hardened | -320° to 210° | 00000000 | |||||
3/8" | -0.002" to 0.002" | Hardened | -320° to 210° | 00000000 | |||||
1/2" | -0.002" to 0.002" | Hardened | -320° to 210° | 00000000 | |||||
5/8" | -0.002" to 0.002" | Hardened | -320° to 210° | 00000000 | |||||
3/4" | -0.002" to 0.002" | Hardened | -320° to 210° | 00000000 | |||||
7/8" | -0.002" to 0.002" | Hardened | -320° to 210° | 00000000 | |||||
1" | -0.002" to 0.002" | Hardened | -320° to 210° | 00000000 | |||||
1 1/8" | -0.003" to 0.003" | Hardened | -320° to 210° | 00000000 | |||||
1 1/4" | -0.003" to 0.003" | Hardened | -320° to 210° | 00000000 | |||||
1 3/8" | -0.003" to 0.003" | Hardened | -320° to 210° | 00000000 | |||||
1 1/2" | -0.003" to 0.003" | Hardened | -320° to 210° | 00000000 | |||||
1 5/8" | -0.004" to 0.004" | Hardened | -320° to 210° | 00000000 | |||||
1 3/4" | -0.004" to 0.004" | Hardened | -320° to 210° | 00000000 | |||||
1 7/8" | -0.004" to 0.004" | Hardened | -320° to 210° | 00000000 | |||||
2" | -0.004" to 0.004" | Hardened | -320° to 210° | 00000000 | |||||
2 1/8" | -0.006" to 0.006" | Hardened | -320° to 210° | 00000000 | |||||
2 1/4" | -0.006" to 0.006" | Hardened | -320° to 210° | 00000000 | |||||
2 3/8" | -0.006" to 0.006" | Hardened | -320° to 210° | 00000000 | |||||
2 1/2" | -0.006" to 0.006" | Hardened | -320° to 210° | 00000000 | |||||
2 5/8" | -0.006" to 0.006" | Hardened | -320° to 210° | 00000000 | |||||
2 3/4" | -0.006" to 0.006" | Hardened | -320° to 210° | 00000000 | |||||
3" | -0.006" to 0.006" | Hardened | -320° to 210° | 00000000 | |||||
3 1/4" | -0.008" to 0.008" | Hardened | -320° to 210° | 00000000 | |||||
3 1/2" | -0.012" to 0.012" | Hardened | -320° to 210° | 00000000 | |||||
3 3/4" | -0.012" to 0.012" | Hardened | -320° to 210° | 00000000 | |||||
4" | -0.012" to 0.012" | Hardened | -320° to 210° | 00000000 | |||||
4 1/2" | -0.012" to 0.012" | Hardened | -320° to 210° | 00000000 | |||||
5" | -0.012" to 0.012" | Hardened | -320° to 210° | 00000000 | |||||
5 1/2" | -0.016" to 0.016" | Hardened | -320° to 210° | 00000000 | |||||
6" | -0.016" to 0.016" | Hardened | -320° to 210° | 00000000 |
Dia. | Dia. Tolerance | Heat Treatment | Temperature Range, °F | 1/4" Lg. | 1/2" Lg. | 1" Lg. | 3" Lg. | |
2" | -0.004" to 0.004" | Hardened | -320° to 210° | 0000000 | ||||
2 1/4" | -0.006" to 0.006" | Hardened | -320° to 210° | 0000000 | ||||
2 1/2" | -0.006" to 0.006" | Hardened | -320° to 210° | 0000000 | ||||
2 3/4" | -0.006" to 0.006" | Hardened | -320° to 210° | 0000000 | ||||
3" | -0.008" to 0.008" | Hardened | -320° to 210° | 0000000 | ||||
3 1/4" | -0.008" to 0.008" | Hardened | -320° to 210° | 0000000 | ||||
3 1/2" | -0.012" to 0.012" | Hardened | -320° to 210° | 0000000 | ||||
4" | -0.012" to 0.012" | Hardened | -320° to 210° | 0000000 | ||||
4 1/2" | -0.012" to 0.012" | Hardened | -320° to 210° | 0000000 | ||||
5" | -0.012" to 0.012" | Hardened | -320° to 210° | 0000000 | ||||
5 1/2" | -0.020" to 0.020" | Hardened | -320° to 210° | 0000000 | ||||
6" | -0.020" to 0.020" | Hardened | -320° to 210° | 0000000 | ||||
7" | -0.025" to 0.025" | Hardened | -320° to 210° | 0000000 | ||||
8" | -0.030" to 0.030" | Hardened | -320° to 210° | 0000000 |
Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance. Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Dia. | Dia. Tolerance | Heat Treatment | Temperature Range, °F | Straightness Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
3/32" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
1/8" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
3/16" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
1/4" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
5/16" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
3/8" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
7/16" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
1/2" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
9/16" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
5/8" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
11/16" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
3/4" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
7/8" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
1" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
1 1/4" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
1 1/2" | -0.0005" to 0.0000" | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
4mm | -0.0127mm to 0.0000mm | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
5mm | -0.0127mm to 0.0000mm | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
6mm | -0.0127mm to 0.0000mm | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
8mm | -0.0127mm to 0.0000mm | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
10mm | -0.0127mm to 0.0000mm | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
12mm | -0.0127mm to 0.0000mm | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
15mm | -0.0127mm to 0.0000mm | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
20mm | -0.0127mm to 0.0000mm | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
25mm | -0.0127mm to 0.0000mm | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
30mm | -0.0127mm to 0.0000mm | Hardened | -320° to 210° | 0.005" per ft. | 0000000 | |||||
40mm | -0.0127mm to 0.0000mm | Hardened | -320° to 210° | 0.005" per ft. | 0000000 |
Originally developed for aircraft frames, uses for 7075 aluminum now include a wide range of high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Outside | Inside | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Heat Treatment | Temperature Range, °F | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/16" Wall Thick. (-0.006" to 0.006" Tolerance) | ||||||||||||
1/2" | -0.010" to 0.010" | 1/2" | -0.010" to 0.010" | 7/16" | 7/16" | Hardened | -320° to 210° | 0.050" per ft. | 0000000 | |||
3/4" | -0.010" to 0.010" | 3/4" | -0.010" to 0.010" | 11/16" | 11/16" | Hardened | -320° to 210° | 0.050" per ft. | 0000000 | |||
7/8" | -0.010" to 0.010" | 7/8" | -0.010" to 0.010" | 13/16" | 13/16" | Hardened | -320° to 210° | 0.050" per ft. | 0000000 | |||
1" | -0.024" to 0.024" | 1" | -0.024" to 0.024" | 15/16" | 15/16" | Hardened | -320° to 210° | 0.050" per ft. | 0000000 | |||
1 1/2" | -0.024" to 0.024" | 1 1/2" | -0.024" to 0.024" | 1 7/16" | 1 7/16" | Hardened | -320° to 210° | 0.050" per ft. | 0000000 | |||
1/8" Wall Thick. (-0.007" to 0.007" Tolerance) | ||||||||||||
7/8" | -0.010" to 0.010" | 7/8" | -0.010" to 0.010" | 3/4" | 3/4" | Hardened | -320° to 210° | 0.050" per ft. | 0000000 | |||
1" | -0.024" to 0.024" | 1" | -0.024" to 0.024" | 7/8" | 7/8" | Hardened | -320° to 210° | 0.050" per ft. | 0000000 | |||
1 1/4" | -0.024" to 0.024" | 1 1/4" | -0.024" to 0.024" | 1 1/8" | 1 1/8" | Hardened | -320° to 210° | 0.050" per ft. | 0000000 | |||
1 1/2" | -0.024" to 0.024" | 1 1/2" | -0.024" to 0.024" | 1 3/8" | 1 3/8" | Hardened | -320° to 210° | 0.050" per ft. | 0000000 | |||
2" | -0.024" to 0.024" | 2" | -0.024" to 0.024" | 1 7/8" | 1 7/8" | Hardened | -320° to 210° | 0.050" per ft. | 0000000 | |||
2 1/2" | -0.024" to 0.024" | 2 1/2" | -0.024" to 0.024" | 2 3/8" | 2 3/8" | Hardened | -320° to 210° | 0.050" per ft. | 0000000 |