2024 Aluminum Angles | McMaster-Carr

Filter by

Shape

System of Measurement

Outside Height

Wall Thickness

Outside Width

Material

Inside Corner Shape

Temper Designation

Yield Strength

Leg Edge Shape

Specifications Met

Outside Corner Shape

Hardness

Hardness Rating

DFARS Compliance

Appearance

Fabrication

Heat Treatment

Tolerance Rating

Heat Treatable

Shape Type

Elongation

Minimum Temperature

Forward

How can we improve?

40 Products

About Aluminum

Yield Strength: 42,000 psi
Hardness: Brinell 120 (Medium)
Temper: T3511
Fabrication: Extruded
Specifications Met: ASTM B221, SAE AMS-QQ-A-200/3

While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed. It offers similar performance to 7075 aluminum, but it’s not as strong.

For technical drawings and 3-D models, click on a part number.

Outside				Inside
Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Ht.	Wd.	Heat Treatment	Temperature Range, °F		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
1/16" Wall Thick. (-0.006" to 0.006" Tolerance)
1/2"	-0.026" to 0.026"	1/2"	-0.026" to 0.026"	7/16"	7/16"	Hardened	-320° to 300°	0000000	000000	000000	000000
5/8"	-0.026" to 0.026"	5/8"	-0.026" to 0.026"	9/16"	9/16"	Hardened	-320° to 300°	0000000	00000	00000	00000
3/4"	-0.026" to 0.026"	3/4"	-0.026" to 0.026"	11/16"	11/16"	Hardened	-320° to 300°	0000000	00000	00000	00000
7/8"	-0.026" to 0.026"	7/8"	-0.026" to 0.026"	13/16"	13/16"	Hardened	-320° to 300°	0000000	00000	00000	00000
1"	-0.026" to 0.026"	1"	-0.026" to 0.026"	15/16"	15/16"	Hardened	-320° to 300°	0000000	00000	00000	00000
1 1/2"	-0.026" to 0.026"	1 1/2"	-0.026" to 0.026"	1 7/16"	1 7/16"	Hardened	-320° to 300°	0000000	00000	00000	000000
1/8" Wall Thick. (-0.007" to 0.007" Tolerance)
3/4"	-0.026" to 0.026"	3/4"	-0.026" to 0.026"	5/8"	5/8"	Hardened	-320° to 300°	0000000	00000	00000	00000
1"	-0.026" to 0.026"	1"	-0.026" to 0.026"	7/8"	7/8"	Hardened	-320° to 300°	0000000	00000	00000	000000
1 1/4"	-0.026" to 0.026"	1 1/4"	-0.026" to 0.026"	1 1/8"	1 1/8"	Hardened	-320° to 300°	0000000	00000	00000	000000
1 1/2"	-0.026" to 0.026"	1 1/2"	-0.026" to 0.026"	1 3/8"	1 3/8"	Hardened	-320° to 300°	0000000	00000	00000	000000
2"	-0.026" to 0.026"	2"	-0.026" to 0.026"	1 7/8"	1 7/8"	Hardened	-320° to 300°	0000000	00000	000000	000000
2 1/2"	-0.026" to 0.026"	2 1/2"	-0.026" to 0.026"	2 3/8"	2 3/8"	Hardened	-320° to 300°	0000000	00000	000000	000000
3/16" Wall Thick. (-0.007" to 0.007" Tolerance)
1 1/4"	-0.026" to 0.026"	1 1/4"	-0.026" to 0.026"	1 1/16"	1 1/16"	Hardened	-320° to 300°	0000000	00000	000000	000000
1 1/2"	-0.026" to 0.026"	1 1/2"	-0.026" to 0.026"	1 5/16"	1 5/16"	Hardened	-320° to 300°	0000000	00000	000000	000000
2"	-0.026" to 0.026"	2"	-0.026" to 0.026"	1 13/16"	1 13/16"	Hardened	-320° to 300°	0000000	00000	000000	000000
2 1/2"	-0.026" to 0.026"	2 1/2"	-0.026" to 0.026"	2 5/16"	2 5/16"	Hardened	-320° to 300°	0000000	00000	000000	000000
1/4" Wall Thick. (-0.008" to 0.008" Tolerance)
2"	-0.026" to 0.026"	2"	-0.026" to 0.026"	1 3/4"	1 3/4"	Hardened	-320° to 300°	0000000	00000	000000	000000
3"	-0.026" to 0.026"	3"	-0.026" to 0.026"	2 3/4"	2 3/4"	Hardened	-320° to 300°	0000000	000000	000000	000000

High-Strength 2024 Aluminum Z-Bars

Yield Strength: 42,000 psi
Hardness: Brinell 120 (Medium)
Temper: T3511
Fabrication: Extruded
Specifications Met: ASTM B221, SAE AMS-QQ-A-200/3

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Outside
Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Heat Treatment	Temperature Range, °F		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
0.05" Wall Thick. (-0.009" to 0.009" Tolerance)
3/4"	-0.024" to 0.024"	3/4"	-0.024" to 0.024"	Hardened	-320° to 300°	0000000	000000	000000	000000
7/8"	-0.024" to 0.024"	3/4"	-0.024" to 0.024"	Hardened	-320° to 300°	0000000	00000	00000	00000
1 1/8"	-0.024" to 0.024"	7/8"	-0.024" to 0.024"	Hardened	-320° to 300°	0000000	00000	00000	00000
1/16" Wall Thick. (-0.009" to 0.009" Tolerance)
1/2"	-0.024" to 0.024"	3/4"	-0.024" to 0.024"	Hardened	-320° to 300°	0000000	00000	00000	00000
5/8"	-0.024" to 0.024"	3/4"	-0.024" to 0.024"	Hardened	-320° to 300°	0000000	00000	00000	00000
5/8"	-0.024" to 0.024"	1"	-0.024" to 0.024"	Hardened	-320° to 300°	0000000	00000	00000	00000
3/4"	-0.024" to 0.024"	1"	-0.024" to 0.024"	Hardened	-320° to 300°	0000000	00000	00000	00000
1"	-0.024" to 0.024"	3/4"	-0.024" to 0.024"	Hardened	-320° to 300°	0000000	00000	00000	00000
1"	-0.024" to 0.024"	1"	-0.024" to 0.024"	Hardened	-320° to 300°	0000000	00000	00000	000000
1 1/8"	-0.024" to 0.024"	7/8"	-0.024" to 0.024"	Hardened	-320° to 300°	0000000	00000	00000	00000
1 1/8"	-0.024" to 0.024"	1 1/8"	-0.024" to 0.024"	Hardened	-320° to 300°	0000000	00000	00000	000000
1/8" Wall Thick. (-0.009" to 0.009" Tolerance)
1 3/8"	-0.024" to 0.024"	1 1/4"	-0.024" to 0.024"	Hardened	-320° to 300°	0000000	00000	000000	000000
2"	-0.024" to 0.024"	1 1/2"	-0.024" to 0.024"	Hardened	-320° to 300°	0000000	00000	000000	000000

High-Strength 2024 Aluminum T-Bars

Yield Strength: 42,000 psi
Hardness: Brinell 120 (Medium)
Temper: T3511
Fabrication: Extruded
Specifications Met: ASTM B221, SAE AMS-QQ-A-200/3

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Outside
Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Heat Treatment	Temperature Range, °F	Straightness Tolerance		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
1/16" Wall Thick. (-0.007" to 0.007" Tolerance)
3/4"	-0.024" to 0.024"	1 1/2"	-0.014" to 0.014"	Hardened	-320° to 300°	0.050" per ft.	0000000	000000	000000	0000000
1"	-0.024" to 0.024"	1 3/8"	-0.014" to 0.014"	Hardened	-320° to 300°	0.050" per ft.	0000000	00000	00000	000000
1/8" Wall Thick. (-0.007" to 0.007" Tolerance)
1"	-0.024" to 0.024"	2"	-0.024" to 0.024"	Hardened	-320° to 300°	0.050" per ft.	0000000	00000	00000	000000
1 1/2"	-0.024" to 0.024"	3"	-0.024" to 0.024"	Hardened	-320° to 300°	0.050" per ft.	0000000	00000	000000	000000
2"	-0.024" to 0.024"	2 1/2"	-0.024" to 0.024"	Hardened	-320° to 300°	0.050" per ft.	0000000	00000	000000	000000
2 1/2"	-0.024" to 0.024"	3"	-0.024" to 0.024"	Hardened	-320° to 300°	0.050" per ft.	0000000	00000	000000	000000
3/16" Wall Thick. (-0.007" to 0.007" Tolerance)
2"	-0.024" to 0.024"	2 1/2"	-0.024" to 0.024"	Hardened	-320° to 300°	0.050" per ft.	0000000	00000	000000	000000
2"	-0.024" to 0.024"	3"	-0.024" to 0.024"	Hardened	-320° to 300°	0.050" per ft.	0000000	00000	000000	000000
2 1/2"	-0.024" to 0.024"	3"	-0.024" to 0.024"	Hardened	-320° to 300°	0.050" per ft.	0000000	00000	000000	000000

Email Us

About Aluminum

High-Strength 2024 Aluminum 90° Angles

High-Strength 2024 Aluminum Z-Bars

High-Strength 2024 Aluminum T-Bars