Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.

Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.

Also known as dry disconnects and double shut-off couplings, these have a shut-off valve in the plug and socket for minimal fluid loss when disconnecting the hose line.

The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.

Plugs and sockets are color coded by shape so you can't mix hose lines. Only plugs and sockets of the same color will fit together.

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. Also known as dry disconnects and double shut-off couplings, they have a shut-off valve in the plug and the socket for minimal fluid loss when disconnecting your hose line.

Connect your hose to a cam-and-groove vapor recovery valve.

Also known as dry disconnects and double shut-off couplings, these couplings make connecting and disconnecting your line quick and virtually spill-free. Built to stand up to petroleum products, such as diesel fuel and gasoline, their body and gasket are made from materials that won’t corrode from oil.

Use these couplings at pressures up to 6,500 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Snap-Tite H-Shape plugs and sockets.

Reduce the risk of spills near electronics when connecting and disconnecting liquid cooling lines. Also known as double shut-off couplings, these couplings have a shut-off valve on both sides that stops the flow of coolant if they’re separated.

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

The rocker lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment.

Use these barbed fittings in low-pressure steam applications up to 150 psi. Slide the barbed end into hose and secure with a clamp.

Use these fittings with sand, steel shot, and other abrasive material. They have a unique claw-style head that connects to other abrasive-material hose fittings with a quarter twist.

Turn the handle to rewind the hose.

Protect your hose when it's not in use.

Offering excellent UV and ozone resistance, this rubber hose is a good fit for outdoor applications.

When your process requires hot water, reach for this rubber hose.

Hose is designed to ensure water keeps flowing even if the hose kinks.

Transport milk, syrup, meat, and other wet food and beverages through your line.

Made of platinum-cured silicone, this hose stays strong and flexible across a wide temperature range. Use it with juice, meat, milk, poultry, and syrup.

Transfer flour, grain, rice, sugar, and other dry food through lines connected by cam-and-groove fittings.

The most durable dry-food hose we offer, this hose is made of gum rubber for excellent resistance to cuts and tears.

You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.

Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.

Also known as pin-rack hose, this hose can be folded to fit in a rack.

Lightweight yet tough, this hose has an abrasion-resistant polyester cover.

To prevent hose from twisting, kinking, and wearing prematurely, these swivels rotate before and after installation as needed. Connect them to the threaded end of your dispensing hose.

Dispense chemicals from a line that attaches and detaches from your drum or intermediate bulk container (IBC) in seconds. These nozzles and the included hose come with fittings that connect when you insert the plug into the socket and push the levers down.

Nozzles allow you to control the flow while dispensing hydraulic fluid.

Turn the hand crank to rewind your hose.

Color-code fittings for easy identification. These aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

Made of nickel-plated brass, these fittings have better corrosion resistance than unplated brass fittings.

The external hex bolt on these fittings allows for easy installation in cramped spaces. They are also known as banjo-style fittings and JIC (Joint Industrial Council) fittings. They provide a tight seal on tubing that is flared to 37°.

These manifolds have two separate sections inside, so you can run two different substances through them without worrying about them intermixing. Also known as headers.

When you’re short on vertical space, these manifolds are a good fit—they have outlets on the side instead of on top, so they have a lower profile than rectangular manifolds. Use them to distribute air or fluid to five locations from a single supply source.

With outlets on the side instead of on top, these manifolds have a lower profile than rectangular manifolds and fit well in cramped spaces. Use them to distribute air or fluid to three locations from a single supply source.

These junction blocks have threaded holes that allow air or fluid to flow at a 90° angle through the block. Use them to organize and separate multiple lines in your system.

Twist these fittings onto aluminum pipe for quick, sealed connections—no threading, soldering, or welding necessary. Use them to build a compressed air system in half the time it would take to build a copper or steel system.

Deliver an equal amount of oil to multiple lubrication points at once.

Control consumption and noise by adjusting the airflow.

Turn your blowgun into a scraper to remove and blow away debris at the same time.

Add brushes, crevice tools, blower nozzles, extension wands, and other attachments to your vacuum hose.

Use these guns to clean as well as apply chemicals and solvents.