Slide drawers, panels, and doors with these tracks and rollers.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

A floating bearing in these self-aligning carriages adjusts to compensate for misalignment between rails, so your carriages still move in tandem.

Create a self-aligning system that can be locked in place with these carriages and guide rails.

A handle on the side of the carriage locks the carriage in place.

Fasten loads on the side of these carriages and add linear motion to a T-slot assembly.

For applications with low clearance, these carriages protrude less than 5 mm above their rails.

Build loops, circuits, and curved paths in assembly stations and other repetitive processes.

A handle locks these carriages in place on curved paths, loops, and circuits in assembly stations and other repetitive processes.

V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.

Use these carriages and guide rails for light loads where precise movement is not required.

These track roller carriages and guide rails are stainless steel for use in wet, corrosive environments.

Needle-roller bearings give these track roller carriages higher load capacities than other track roller carriages.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Adapt most 15 mm guide rails to fit on T-slotted assemblies.

For smooth, accurate movement around curves and loops, these carriages have ball bearings that work well in high-speed, high-load applications.

With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.