Choose a Category
Material Material |
|---|
|
Aluminum Performance Properties Aluminum PerformanceProperties |
|---|
|
Temper Rating Temper Rating |
|---|
|
Hardness Hardness |
|---|
|
|
Fabrication Fabrication |
|---|
|
Yield Strength Yield Strength |
|---|
|
|
Certificate Certificate |
|---|
 | |
Heat Treatment Heat Treatment |
|---|
|
Finish Finish |
|---|
|
About Aluminum
More
Easy-to-Form Pure Aluminum Sheets and Bars
Made of 1100-series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required. These temper O foil, sheets, and bars are annealed to the softest state possible, which is sometimes called “dead soft.” The foil is often used as a wrap, cover, mask, or patch; the black foil eliminates reflections.
Foil
- Yield Strength: 2,500 psi
- Hardness: Brinell 20 (Soft)
- Temper: O (Annealed)
- Fabrication: See table
Each
| Thick. | Thick. Tolerance | Wd. | Lg. | Fabrication | Heat Treatment | Temperature Range, °F | Each | |
| 0.0007" | -0.0001" to 0.0001" | 12" | 500ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0007" | -0.0001" to 0.0001" | 12" | 1,000ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0007" | -0.0001" to 0.0001" | 18" | 500ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0007" | -0.0001" to 0.0001" | 18" | 1,000ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0010" | -0.0001" to 0.0001" | 12" | 250ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0010" | -0.0001" to 0.0001" | 12" | 500ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0010" | -0.0001" to 0.0001" | 18" | 250ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0010" | -0.0001" to 0.0001" | 18" | 500ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0010" | -0.0001" to 0.0001" | 18" | 1,000ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0015" | -0.0002" to 0.0002" | 6" | 250ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0015" | -0.0002" to 0.0002" | 6" | 500ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0015" | -0.0002" to 0.0002" | 8" | 250ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0015" | -0.0002" to 0.0002" | 8" | 500ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0020" | -0.0002" to 0.0002" | 18" | 250ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0020" | -0.0002" to 0.0002" | 18" | 500ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0030" | -0.0003" to 0.0003" | 36" | 100ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0030" | -0.0003" to 0.0003" | 48" | 100ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0050" | -0.0005" to 0.0005" | 36" | 100ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0050" | -0.0005" to 0.0005" | 48" | 100ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
Adhesive-Back Foil
- Yield Strength: 2,500 psi
- Hardness: Brinell 20 (Soft)
- Temper: O (Annealed)
- Fabrication: Cold Rolled
| Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | Adhesive Type | Each | |
6" × 100 ft. | ||||||
|---|---|---|---|---|---|---|
| 0.0020" | -0.0002" to 0.0002" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 0000000 |
6" × 180 ft. | ||||||
| 0.0015" | -0.0002" to 0.0002" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
| 0.0040" | -0.0004" to 0.0004" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
18" × 50 ft. | ||||||
| 0.0015" | -0.0002" to 0.0002" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
18" × 180 ft. | ||||||
| 0.0015" | -0.0002" to 0.0002" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
| 0.0040" | -0.0004" to 0.0004" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
Powder-Coated Foil
- Yield Strength: 2,500 psi
- Hardness: Brinell 20 (Soft)
- Temper: O (Annealed)
- Fabrication: Extruded
Hardened Easy-to-Form Pure
1100 Aluminum Sheets and Bars
These sheets and bars are tempered to a 1/2-hard or full-hard state to make them over twice as strong as standard 1100 aluminum. Because 1100 aluminum is 99% pure, it offers superior corrosion resistance and electrical conductivity.
Temper H19 foil is often used as EMI/RFI shielding in electronic applications.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Foil
- Yield Strength: 20,000 psi
- Hardness: Brinell 45 (Soft)
- Temper: H19 (Full Hard)
- Fabrication: Cold Rolled
| Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | Each | |
2" × 25 ft. | |||||
|---|---|---|---|---|---|
| 0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 000000 |
6" × 50 ft. | |||||
| 0.001" | -0.0001" to 0.0001" | Hardened | -20° to 300° | 0000000 | 00000 |
| 0.002" | -0.0002" to 0.0002" | Hardened | -20° to 300° | 0000000 | 00000 |
| 0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 00000 |
6" × 100 ft. | |||||
| 0.001" | -0.0001" to 0.0001" | Hardened | -20° to 300° | 0000000 | 00000 |
| 0.002" | -0.0002" to 0.0002" | Hardened | -20° to 300° | 0000000 | 00000 |
| 0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 00000 |
18" × 50 ft. | |||||
| 0.001" | -0.0001" to 0.0001" | Hardened | -20° to 300° | 0000000 | 00000 |
| 0.002" | -0.0002" to 0.0002" | Hardened | -20° to 300° | 0000000 | 00000 |
| 0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 00000 |
18" × 100 ft. | |||||
| 0.001" | -0.0001" to 0.0001" | Hardened | -20° to 300° | 0000000 | 000000 |
| 0.002" | -0.0002" to 0.0002" | Hardened | -20° to 300° | 0000000 | 000000 |
| 0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 000000 |
Corrosion-Resistant 3003 Aluminum Sheets and Bars
3003 aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, garage doors, and general sheet metal work.
PTFE-coated foil has a green PTFE coating on one side, which is slippery and allows it to be used as a release liner in manufacturing processes.
Foil
- Yield Strength:
.003" to .010" Thick.: Not Rated
All other sizes: 21,000 psi - Hardness:
.003" to .010" Thick.: Brinell 25 (Soft)
All other sizes: Not Rated - Temper:
.003" to .010" Thick.: O (Annealed)
.012" Thick.: H22 (1/4 Hard)
.016" Thick.: H14 (1/2 Hard) - Fabrication: Cold Rolled
- Specifications Met:
.006" to .016" Thick.: ASTM B209
| Thick. | Thick. Tolerance | Wd. | Lg. | Temperature Range, °F | Each | |
| 0.012" | -0.0015" to 0.0015" | 2" | 10 ft. | -15° to 300° | 0000000 | 000000 |
| 0.012" | -0.0015" to 0.0015" | 6" | 10 ft. | -15° to 300° | 0000000 | 00000 |
| 0.012" | -0.0015" to 0.0015" | 14" | 5 ft. | -15° to 300° | 0000000 | 00000 |
| 0.012" | -0.0015" to 0.0015" | 14" | 10 ft. | -15° to 300° | 0000000 | 00000 |
| 0.012" | -0.0015" to 0.0015" | 18" | 5 ft. | -15° to 300° | 0000000 | 00000 |
| 0.012" | -0.0015" to 0.0015" | 20" | 10 ft. | -15° to 300° | 0000000 | 00000 |
| 0.016" | -0.002" to 0.002" | 2" | 25 ft. | -15° to 300° | 0000000 | 00000 |
| 0.016" | -0.002" to 0.002" | 6" | 25 ft. | -15° to 300° | 0000000 | 00000 |
| 0.016" | -0.002" to 0.002" | 6" | 50 ft. | -15° to 300° | 0000000 | 00000 |
| 0.016" | -0.002" to 0.002" | 10" | 50 ft. | -15° to 300° | 0000000 | 00000 |
| 0.016" | -0.002" to 0.002" | 12" | 50 ft. | -15° to 300° | 0000000 | 00000 |
| 0.016" | -0.002" to 0.002" | 14" | 50 ft. | -15° to 300° | 0000000 | 000000 |
| 0.016" | -0.002" to 0.002" | 18" | 50 ft. | -15° to 300° | 0000000 | 000000 |
| 0.016" | -0.002" to 0.002" | 20" | 50 ft. | -15° to 300° | 0000000 | 000000 |
| 0.016" | -0.002" to 0.002" | 28" | 50 ft. | -15° to 300° | 0000000 | 000000 |
| 0.016" | -0.002" to 0.002" | 36" | 25 ft. | -15° to 300° | 0000000 | 000000 |
| 0.016" | -0.002" to 0.002" | 36" | 50 ft. | -15° to 300° | 0000000 | 000000 |
PTFE-Coated Foil
- Yield Strength: 5,000 psi
- Hardness: Not Rated
- Temper: O (Annealed)
- Fabrication: Cold Rolled
V-Belts
