Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Cut the grip to the length you need before mounting. Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

With a mounting hole center-to-center distance of 1" or less, these are the smallest pull handles we offer. Thread screws through holes from the back of your surface into the handles to open and close tiny doors and drawers.

Insert studs into holes in your surface and secure from the backside to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Detents keep these handles in the extended or folded position—they won't move until you reposition them. Insert studs into holes in your surface and secure from the backside to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.

Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. Detents keep these handles in the extended or folded position—they won't move until you reposition them.

Access handles from multiple angles to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Mount these pulls to the edge of drawers, panels, and doors. When closed, only the fingertip grip is visible.

Use these handles as grips on hand wheels and cranks to operate machinery.

Use these standard cam handles for most clamping applications. Push down on the handle and the head applies pressure to quickly draw two parts together for fast adjustments.

Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Knobs have left-hand threads; they're used in applications where counterclockwise motion can loosen common right-hand threads. Mount them into a threaded hole to position, tighten, and hold fixtures, equipment, and machinery.

The domed top allows you to firmly hold these knobs in the palm of your hand to position, tighten, and hold fixtures, equipment, and machinery. Install these knobs on a threaded stud.

Tap custom threads or secure with a set screw to provide a firm grip to position, tighten, and hold fixtures, equipment, and machinery.

Mill specific holes or keyways in the hub to meet your specifications, or weld in place. These knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

The domed top allows you to firmly hold these knobs in the palm of your hand. Mill specific holes or keyways in the hub to meet your specifications, or weld in place. Use these knobs to position, tighten, and hold fixtures, equipment, and machinery.

Primarily used on spigot valves, slide these knobs over valves with a square stem and secure them in place with your fastener.

Often used on pallet and lift trucks, these knobs attach to steering wheels for one-hand operation.

Create custom threads or drill a hole in the side of the hub to secure with a set screw. The spoked design allows a better grip around the rim than solid hand wheels to manually adjust valves, presses, and machine components.

Create custom threads or drill a hole in the side of the hub to secure with a set screw. Long shafts can pass through these hand wheels for mounting versatility. The wheels are solid, so they won't catch hands or material while manually adjusting valves, presses, and machine components.

An easy-to-read dial provides accurate settings for monitoring the number of wheel turns while manually adjusting valves, presses, and machine components.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Hold crossbars in the open position so traffic can pass freely through doorways.

Often used on emergency exits, touch bars open doors with a push.

Use these wrenches to turn hex-shaped dies by hand. They're also known as die stocks.

These rods give you a longer reach and let you add a handle or another extension.

Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.

Made of aluminum-bronze, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Replace rusty or broken hardware on your toilet partitions without needing to buy the entire component.

These kits include all brackets and fasteners needed for mounting partitions.

No assembly required with these one-piece railings.

Save time and money by replacing worn or damaged handles instead of the entire opener.