Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material. Use a cutting punch (sold separately) to create the hole, then set the grommet using either an installation punch or a press (both sold separately). Grommet trade size refers to the hole size and the size of the installation tool needed. All of these grommets can be used outdoors.

Aluminum grommets are lightweight and have good corrosion resistance.

Hammer-driven cutting punches create holes for installing grommets when you strike them with a wooden or rawhide mallet. Hammer-driven installation punches set grommets in a hole when you strike them with a wooden or rawhide mallet. Manual presses set grommets in a hole when you squeeze the adjustable pliers-grip handle. Requires a die set (sold separately).

For technical drawings and 3-D models, click on a part number.

A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.

Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Aluminum couplings are lighter in weight than brass plugs and sockets. They have good abrasion and corrosion resistance. Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.

Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.

For technical drawings and 3-D models, click on a part number.