Shape Shape | Show |
|---|
 | Honeycomb |
Shape Shape | Hide |
|---|
 |  |
| Sheet and Bar | Rod and Disc |
 |  |
| 90° Angle | Round Tube |
 |  |
| Rectangular Tube | U Channel |
 |  |
| Z Bar | Hex Bar |
 |  |
| T Bar | Foil |
 | |
| H Bar | Honeycomb |
 |  |
| Half Round | I Beam |
 |  |
| Hex Tube | Ball |
 |  |
| Wire | Hat Channel |
 |  |
| Ring | Slotted |
 | |
| Made to Order |
System of Measurement System of Measurement |
|---|
|
Material Material |
|---|
|
Maximum Load Capacity Maximum Load Capacity |
|---|
|
|
Aluminum Performance Properties Aluminum PerformanceProperties |
|---|
|
Temper Temper |
|---|
|
Tolerance Rating Tolerance Rating |
|---|
|
Yield Strength Yield Strength |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Temper Rating Temper Rating |
|---|
|
Hardness Hardness |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
Heat Treatable Heat Treatable |
|---|
|
Elongation Elongation |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Deflection @ lb. Load Deflection @ lb. Load |
|---|
|
Face Material Face Material |
|---|
|
About Aluminum
More
Corrosion-Resistant 3000 Series Aluminum Honeycomb Cores
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper: Not Rated
The honeycomb design provides a higher strength-to-weight ratio than solid sheets. These cores are often used as a lightweight alternative to solid aluminum and also for sound insulation. 3000 series aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability.
For technical drawings and 3-D models, click on a part number.
| Thick. | Thick. Tolerance | Honeycomb Cell Size | Max. Load Capacity, lbs./sq. in. | Temperature Range, °F | 12” × 12” | 24” × 24” | 24” × 48” | |
| 1/4" | -0.008" to 0.008" | 1/2" | 165 | 0° to 180° | 000000 | |||
| 3/8" | -0.008" to 0.008" | 1/2" | 165 | 0° to 180° | 000000 | |||
| 1/2" | -0.008" to 0.008" | 1/2" | 165 | 0° to 180° | 000000 | |||
| 3/4" | -0.008" to 0.008" | 1/2" | 165 | 0° to 180° | 000000 | |||
| 1" | -0.008" to 0.008" | 1" | 75 | 0° to 180° | 000000 | |||
| 1 1/4" | -0.008" to 0.008" | 1" | 75 | 0° to 180° | 000000 | |||
| 1 1/2" | -0.008" to 0.008" | 1" | 75 | 0° to 180° | 000000 |
Corrosion-Resistant 3000 Series Aluminum Honeycomb Panels
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper: Not Rated
A honeycomb core is bonded between two aluminum sheets for rigidity. These panels offer a higher strength-to-weight ratio than solid sheets, so they're often used as a lightweight alternative to solid aluminum. They're also used for sound insulation. They are painted white and covered with a protective peel-off film. 3000 series aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability.
For technical drawings and 3-D models, click on a part number.
| Thick. | Thick. Tolerance | Honeycomb Cell Size | Max. Load Capacity, lbs. | Deflection @ lb. Load | Face Thick. | Temperature Range, °F | Each | |
12" × 12" | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/8" | -0.020" to 0.020" | 3/8" | 250 | 0.1" @ 100 lbs. | 0.032" | 0° to 180° | 00000000 | 000000 |
| 1/4" | -0.020" to 0.020" | 3/8" | 525 | 0.02" @ 100 lbs. | 0.032" | 0° to 180° | 00000000 | 00000 |
| 3/8" | -0.020" to 0.020" | 1/4" | 825 | 0.01" @ 100 lbs. | 0.032" | 0° to 180° | 0000000 | 00000 |
| 1/2" | -0.020" to 0.020" | 1/4" | 1,125 | 0.01" @ 100 lbs. | 0.032" | 0° to 180° | 0000000 | 00000 |
| 3/4" | -0.020" to 0.020" | 1/4" | 1,725 | 0.005" @ 100 lbs. | 0.032" | 0° to 180° | 0000000 | 00000 |
| 1" | -0.020" to 0.020" | 3/4" | 625 | 0.005" @ 100 lbs. | 0.032" | 0° to 180° | 0000000 | 00000 |
24" × 24" | ||||||||
| 1/8" | -0.020" to 0.020" | 3/8" | 250 | 0.4" @ 100 lbs. | 0.032" | 0° to 180° | 00000000 | 000000 |
| 1/4" | -0.020" to 0.020" | 3/8" | 525 | 0.1" @ 100 lbs. | 0.032" | 0° to 180° | 00000000 | 000000 |
| 3/8" | -0.020" to 0.020" | 1/4" | 825 | 0.04" @ 100 lbs. | 0.032" | 0° to 180° | 0000000 | 000000 |
| 1/2" | -0.020" to 0.020" | 1/4" | 1,125 | 0.02" @ 100 lbs. | 0.032" | 0° to 180° | 0000000 | 000000 |
| 3/4" | -0.020" to 0.020" | 1/4" | 1,725 | 0.01" @ 100 lbs. | 0.032" | 0° to 180° | 0000000 | 000000 |
| 1" | -0.020" to 0.020" | 3/4" | 1,200 | 0.01" @ 100 lbs. | 0.032" | 0° to 180° | 0000000 | 000000 |
24" × 48" | ||||||||
| 1/8" | -0.020" to 0.020" | 3/8" | 125 | 2.8" @ 100 lbs. | 0.032" | 0° to 180° | 00000000 | 000000 |
| 1/4" | -0.020" to 0.020" | 3/8" | 250 | 0.7" @ 100 lbs. | 0.032" | 0° to 180° | 00000000 | 000000 |
| 3/8" | -0.020" to 0.020" | 1/4" | 400 | 0.3" @ 100 lbs. | 0.032" | 0° to 180° | 0000000 | 000000 |
| 1/2" | -0.020" to 0.020" | 1/4" | 550 | 0.2" @ 100 lbs. | 0.032" | 0° to 180° | 0000000 | 000000 |
| 3/4" | -0.020" to 0.020" | 1/4" | 850 | 0.1" @ 100 lbs. | 0.032" | 0° to 180° | 0000000 | 000000 |
| 1" | -0.020" to 0.020" | 3/4" | 1,200 | 0.04" @ 100 lbs. | 0.032" | 0° to 180° | 0000000 | 000000 |