Material Material | Show |
|---|
|
Material Material | Hide |
|---|
|
System of Measurement System of Measurement |
|---|
|
Outside Width Outside Width |
|---|
|
|
|
Aluminum Performance Properties Aluminum PerformanceProperties |
|---|
|
Heat Treatment Heat Treatment |
|---|
|
Yield Strength Yield Strength |
|---|
|
Heat Treatable Heat Treatable |
|---|
|
Specifications Met Specifications Met |
|---|
Fabrication Fabrication |
|---|
|
Certificate Certificate |
|---|
 | Material Certificate with Traceable Lot Number |
Hardness Hardness |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Track Capacity Track Capacity |
|---|
|
|
Component Component |
|---|
|
About Aluminum
More
Multipurpose 6061 Aluminum I-Beams
- Yield Strength: 35,000 psi
- Hardness: Brinell 95 (Soft)
- Temper: T6
- Fabrication: Extruded
- Specifications Met: ASTM B221
Also known as American Standard I-Beams, these I-beams have rounded corners. The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Outside | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wall Thick. | Wall Thick. Tolerance | Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Heat Treatment | Temperature Range, °F | Straightness Tolerance | 3 ft. Lg. | 6 ft. Lg. | |
| 0.230" | -0.008" to 0.008" | 6" | -0.063" to 0.093" | 3.330" | -0.133" to 0.133" | Hardened | -320° to 300° | 0.0125" per ft. | 0000000 | ||
| 0.326" | -0.008" to 0.008" | 4" | -0.063" to 0.093" | 2.796" | -0.119" to 0.119" | Hardened | -320° to 300° | 0.0125" per ft. | 0000000 | ||
| 0.343" | -0.008" to 0.008" | 6" | -0.063" to 0.093" | 3.443" | -0.137" to 0.137" | Hardened | -320° to 300° | 0.0125" per ft. | 0000000 | ||
| 0.349" | -0.008" to 0.008" | 3" | -0.063" to 0.093" | 2.509" | -0.1" to 0.1" | Hardened | -320° to 300° | 0.0125" per ft. | 0000000 | ||
Architectural 6063 Aluminum H-Bars
- Yield Strength: 16,000 psi
- Hardness: Brinell 55 (Soft)
- Temper: T5
- Fabrication: Extruded
- Specifications Met: ASTM B221
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Outside | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Inside Wd. | Heat Treatment | Temperature Range, °F | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
0.05" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 1.000" | -0.024" to 0.024" | 1.950" | 1.85" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
| 1.060" | -0.024" to 0.024" | 0.700" | 0.60" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
| 1.074" | -0.024" to 0.024" | 1.040" | 0.94" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
| 1.724" | -0.024" to 0.024" | 1.120" | 1.02" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.055" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 1.500" | -0.024" to 0.024" | 2.110" | 2.00" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.062" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 1.500" | -0.024" to 0.024" | 1.034" | 0.91" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.094" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 1.500" | -0.024" to 0.024" | 0.688" | 0.50" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
1/8" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 2.000" | -0.024" to 0.024" | 2.000" | 1.75" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.188" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 1.500" | -0.024" to 0.024" | 0.876" | 0.50" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.2" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 2.400" | -0.024" to 0.024" | 1.750" | 1.35" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
1/4" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 2.375" | -0.024" to 0.024" | 1.000" | 0.50" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
Corrosion-Resistant I-Beam Roller
Track for Doors and Curtains
Built to withstand corrosive marine environments, track is anodized aluminum and hangers are 316 stainless steel. Combine track and hangers to create a system for hanging doors and curtains. Some components that fit together are rated for different capacities; the capacity of your system is determined by the component with the lowest capacity.
Track mounts using bolts (sold separately). Nine bolts are required for every 3 ft. of track. For extra stability, mount an additional track to the floor as a guide.
End stops prevent hangers from rolling off the track.
For technical drawings and 3-D models, click on a part number.
| Lg. | Wd. | Ht. | Material | Color | Each | |
550-lb. Capacity | ||||||
|---|---|---|---|---|---|---|
| 3' 3" | 3/4" | 15/16" | Anodized Aluminum | Black | 00000000 | 000000 |
| 6' 7" | 3/4" | 15/16" | Anodized Aluminum | Black | 00000000 | 00000 |
| 9' 10" | 3/4" | 15/16" | Anodized Aluminum | Black | 00000000 | 000000 |
1,400-lb. Capacity | ||||||
| 3' 3" | 1 1/4" | 1 1/4" | Anodized Aluminum | Black | 00000000 | 00000 |
| 6' 7" | 1 1/4" | 1 1/4" | Anodized Aluminum | Black | 00000000 | 000000 |
| 9' 10" | 1 1/4" | 1 1/4" | Anodized Aluminum | Black | 00000000 | 000000 |
| Material | Color | Each | |
For 550-lb. Track Capacity | |||
|---|---|---|---|
| Anodized Aluminum | Black | 0000000 | 000000 |
I-Beam Roller Track Sets for Doors
These complete sets contain everything you need to create a system for hanging doors. Track is lightweight aluminum and hangers are steel. All hangers adjust vertically between the bottom of the track and the top of the door. Two hangers per door are required.
Additional track and hangers let you create a longer run.
For technical drawings and 3-D models, click on a part number.
Vertical Adjustment | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | For Min. Door Thick. | Wd. | Ht. | Min. | Max. | Material | Mounting Fasteners Included | Each | |
150-lb. Track Capacity | |||||||||
| 4 | 3/4" | 1 9/16" | 15/16" | 2 1/8" | 2 7/8" | Aluminum | Yes | 0000000 | 000000 |
| 5 | 3/4" | 1 9/16" | 15/16" | 2 1/8" | 2 7/8" | Aluminum | Yes | 0000000 | 00000 |
| 6 | 3/4" | 1 9/16" | 15/16" | 2 1/8" | 2 7/8" | Aluminum | Yes | 0000000 | 00000 |
| 8 | 3/4" | 1 9/16" | 15/16" | 2 1/8" | 2 7/8" | Aluminum | Yes | 0000000 | 00000 |
225-lb. Track Capacity | |||||||||
| 6 | 1" | 1 7/8" | 1 5/16" | 3 1/4" | 3 3/4" | Aluminum | Yes | 0000000 | 00000 |
| 8 | 1" | 1 7/8" | 1 5/16" | 3 1/4" | 3 3/4" | Aluminum | Yes | 0000000 | 000000 |
| 10 | 1" | 1 7/8" | 1 5/16" | 3 1/4" | 3 3/4" | Aluminum | Yes | 0000000 | 000000 |
| 12 | 1" | 1 7/8" | 1 5/16" | 3 1/4" | 3 3/4" | Aluminum | Yes | 0000000 | 000000 |
325-lb. Track Capacity | |||||||||
| 5 | 1" | 1 7/8" | 1 5/16" | 3 1/4" | 3 3/4" | Aluminum | Yes | 0000000 | 00000 |
| 6 | 1" | 1 7/8" | 1 5/16" | 3 1/4" | 3 3/4" | Aluminum | Yes | 0000000 | 000000 |
| 7 | 1" | 1 7/8" | 1 5/16" | 3 1/4" | 3 3/4" | Aluminum | Yes | 0000000 | 000000 |
| 8 | 1" | 1 7/8" | 1 5/16" | 3 1/4" | 3 3/4" | Aluminum | Yes | 0000000 | 000000 |
| 10 | 1" | 1 7/8" | 1 5/16" | 3 1/4" | 3 3/4" | Aluminum | Yes | 0000000 | 000000 |
| 12 | 1" | 1 7/8" | 1 5/16" | 3 1/4" | 3 3/4" | Aluminum | Yes | 0000000 | 000000 |