In addition to a filter, these mufflers have a wool felt disc to trap oil mist. They are often used with vacuum pumps and suction devices to reduce noise and filter exhaust fumes.

For technical drawings and 3-D models, click on a part number.

With a threaded connection on both ends, these mufflers can be installed anywhere in your line. Use with large blowers, diaphragm pumps, vacuum pumps, and compressors to reduce noise and filter exhaust fumes.

Also known as reclassifiers, these mufflers have a clear reservoir with a drain plug to remove and store oil mist for reuse. Mufflers must be mounted vertically.

For technical drawings and 3-D models, click on a part number.

Install these mufflers in air-powered drills and other loud equipment. They filter exhaust fumes and reduce noise by 30-35 dB, a reduction that's equivalent to putting in earplugs.

Mufflers with pipe connections thread into NPT or metric threaded exhaust ports.

For technical drawings and 3-D models, click on a part number.

Install these valves in the exhaust ports of air directional control valves to control exhaust air speed without needing access to your cylinder. They control flow in one direction as air moves from the inlet to the exhaust port (meter out). Air flows freely in the opposite direction. Valves include a muffler to reduce the exhaust noise.

Flow coefficient (Cv) is a measurement that indicates how much airflow can pass through a valve. When selecting between valves with the same port size, choose the valve with the higher flow coefficient to ensure it provides enough airflow to operate your system.

For technical drawings and 3-D models, click on a part number.