Abrasive Material Abrasive Material |
|---|
|
Grit Grit |
|---|
|
|
For Finish For Finish |
|---|
|
Abrasive Backing Material Abrasive Backing Material |
|---|
|
Sanding Properties Sanding Properties |
|---|
|
About Sanding Abrasives
More
Sanding Sponges
Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. The abrasive is one grit on the top and one side, and another grit on the bottom and the other side.
| Grit (For Finish) | Wd. | Lg. | Thick. | For Use On | Abrasive Material | Abrasive Backing Material | Pkg. Qty. | Pkg. | |
| 46 (Rough), 80 (Rough) | 3 3/4" | 2 3/4" | 1" | Steel, Wood | Aluminum Oxide | Foam | 3 | 0000000 | 00000 |
| 80 (Rough), 120 (Smooth) | 3 3/4" | 2 3/4" | 1" | Steel, Wood | Aluminum Oxide | Foam | 10 | 0000000 | 00000 |
| 80 (Rough), 120 (Smooth) | 3 3/4" | 2 3/4" | 1" | Steel, Wood | Aluminum Oxide | Foam | 3 | 0000000 | 0000 |
| 80 (Rough), 120 (Smooth) | 5" | 3" | 1" | Steel, Wood | Aluminum Oxide | Foam | 3 | 0000000 | 0000 |
| 100 (Smooth), 150 (Smooth) | 2 3/4" | 4" | 1" | Steel, Wood | Aluminum Oxide | Foam | 1 | 0000000 | 0000 |
| 100 (Smooth), 150 (Smooth) | 2 7/8" | 4 7/8" | 1" | Steel, Wood | Aluminum Oxide | Foam | 1 | 0000000 | 0000 |
| 100 (Smooth), 150 (Smooth) | 9" | 3 5/16" | 1" | Steel, Wood | Aluminum Oxide | Foam | 1 | 0000000 | 0000 |
Clog-Resistant Sanding Sponges
A coating prevents dust and debris from building up on the abrasive surface. Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have abrasive on all four sides.
180 and 320 Grit—Use for sanding between coats of paint.
Sanding Sponges with Angled Sides
The long sides are angled 75°. Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. The abrasive is one grit on the top and one side, and another grit on the bottom and the other side.
| Grit (For Finish) | Wd. | Lg. | Thick. | For Use On | Abrasive Material | Abrasive Backing Material | Pkg. Qty. | Pkg. | |
| 80 (Rough), 120 (Smooth) | 3" | 5" | 1" | Steel, Wood | Aluminum Oxide | Foam | 3 | 0000000 | 00000 |
Super-Flexible Sanding Sponges
These sponges conform exceptionally well to small, contoured surfaces. The abrasive is on one side.
Sanding Sponges for Corners
Evenly sand two surfaces at once. These sponges provide the comfort and control of a sanding block while remaining flexible. The abrasive is on two sides.
| Grit | Wd. | Lg. | Thick. | For Use On | Abrasive Material | Abrasive Backing Material | Each | |
For Smooth Finish | ||||||||
|---|---|---|---|---|---|---|---|---|
| 100 | 3 3/4" | 7" | 4 1/2" | Steel, Wood | Aluminum Oxide | Foam | 0000000 | 00000 |
Cushioned Sanding Pads
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
|---|---|---|---|---|---|---|
For Polished Finish | ||||||
| 2500 | Steel, Wood | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 00000 |
| 3000 | Steel, Wood | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
3" × 4" | ||||||
For Polished Finish | ||||||
| 2500 | Steel, Wood | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 3000 | Steel, Wood | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
Cushioned Sanding Pad Assortments
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
| Includes | No. of Pieces | For Use On | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
|---|---|---|---|---|---|---|
| One each 400, 600, 800, 1200, 1350, 1500, 2000-grit Silicon Carbide Pads One each 2500, 3000-grit Aluminum Oxide Pads | 9 | Steel, Wood | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 000000 |
3" × 4" | ||||||
| One each 400, 600, 800, 1200, 1350, 1500, 2000-grit Silicon Carbide Pads One each 2500, 3000-grit Aluminum Oxide Pads | 9 | Steel, Wood | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 00000 |
Cushioned Sanding Pads for
Aluminum, Soft Metals, and Nonmetals
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
|---|---|---|---|---|---|---|
For Smooth Finish | ||||||
| 180 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 00000 |
For Extra-Smooth Finish | ||||||
| 320 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 360 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 400 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
For Polished Finish | ||||||
| 800 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 1500 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 3000 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
3" × 4" | ||||||
For Smooth Finish | ||||||
| 180 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
For Extra-Smooth Finish | ||||||
| 320 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 360 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 400 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
For Polished Finish | ||||||
| 800 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 1500 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 3000 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
Cushioned Sanding Pad Assortments for
Aluminum, Soft Metals, and Nonmetals
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
| Includes | No. of Pieces | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | |||||||
|---|---|---|---|---|---|---|---|
| One each 180, 320, 360, 400, 800, 1500, 3000-grit Pads | 7 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 00000 |
3" × 4" | |||||||
| One each 180, 320, 360, 400, 800, 1500, 3000-grit Pads | 7 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 00000 |
Cushioned Sanding Pads for
Stainless Steel and Hard Metals
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
|---|---|---|---|---|---|---|
For Polished Finish | ||||||
| 2000 | Stainless Steel, Titanium, Steel, Iron, Nickel | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 00000 |
| 2500 | Stainless Steel, Titanium, Steel, Iron, Nickel | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
3" × 4" | ||||||
For Polished Finish | ||||||
| 2000 | Stainless Steel, Titanium, Steel, Iron, Nickel | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
| 2500 | Stainless Steel, Titanium, Steel, Iron, Nickel | Aluminum Oxide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
Cushioned Sanding Pad Assortments
for Stainless Steel and Hard Metals
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
| Includes | No. of Pieces | For Use On | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
|---|---|---|---|---|---|---|
| One each 220, 230, 240, 260, 280, 320, 500, 800, 1000, 1200, 1500-grit Silicon Carbide Pads One each 2000, 2500-grit Aluminum Oxide Pads | 13 | Stainless Steel, Titanium, Steel, Iron, Nickel | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 000000 |
3" × 4" | ||||||
| One each 220, 230, 240, 260, 280, 320, 500, 800, 1000, 1200, 1500-grit Silicon Carbide Pads One each 2000, 2500-grit Aluminum Oxide Pads | 13 | Stainless Steel, Titanium, Steel, Iron, Nickel | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 00000 |