Compare over 20 aluminum alloys to find the right material for you—all with material certificates for traceability.
Corrosion-Resistant 3000 Series Aluminum Sheets and Bars
3000 series aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, garage doors, and general sheet metal work.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 16,500 psi
- Hardness: Brinell 40 (Soft)
- Temper: H14 (1/2 Hard)
- Fabrication: Cold Worked
- Specifications Met: ASTM B209
| Thick. | Thick. Tolerance | Temperature Range, °F | Each | |
6" × 24" | ||||
|---|---|---|---|---|
| 0.020" | -0.002" to 0.002" | -300° to 300° | 00000000 | 00000 |
12" × 12" | ||||
| 0.020" | -0.002" to 0.002" | -300° to 300° | 00000000 | 0000 |
12" × 24" | ||||
| 0.020" | -0.002" to 0.002" | -300° to 300° | 00000000 | 00000 |
24" × 24" | ||||
| 0.020" | -0.002" to 0.002" | -300° to 300° | 00000000 | 00000 |
24" × 36" | ||||
| 0.020" | -0.002" to 0.002" | -300° to 300° | 00000000 | 00000 |
36" × 48" | ||||
| 0.020" | -0.002" to 0.002" | -300° to 300° | 00000000 | 00000 |
36" × 96" | ||||
| 0.020" | -0.002" to 0.002" | -300° to 300° | 00000000 | 000000 |
Easy-to-Form Pure 1000 Series Aluminum Sheets and Bars
Made of 1000 series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required. These temper O foil, sheets, and bars are annealed to the softest state possible, which is sometimes called “dead soft.”
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 3,500 psi
- Hardness: Brinell 20 (Soft)
- Temper: O
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
High-Strength 2024 Aluminum Sheets and Bars
While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.
Cold-rolled sheets are cut from large pieces to the widths and lengths listed, so the edges may not be parallel.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 41,000 psi
- Hardness: Brinell 120 (Medium)
- Temper:
0.020" to 0.190" thick. sheets: T3
All other sizes: T351 - Fabrication: Cold Rolled
- Specifications Met: ASTM B209
| Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | Each | |
6" × 6" | |||||
|---|---|---|---|---|---|
| 0.020" | -0.003" to 0.003" | Hardened | -320° to 300° | 000000000 | 00000 |
8" × 8" | |||||
| 0.020" | -0.003" to 0.003" | Hardened | -320° to 300° | 000000000 | 0000 |
12" × 12" | |||||
| 0.020" | -0.003" to 0.003" | Hardened | -320° to 300° | 00000000 | 00000 |
12" × 24" | |||||
| 0.020" | -0.003" to 0.003" | Hardened | -320° to 300° | 00000000 | 00000 |
18" × 18" | |||||
| 0.020" | -0.003" to 0.003" | Hardened | -320° to 300° | 000000000 | 00000 |
24" × 24" | |||||
| 0.020" | -0.003" to 0.003" | Hardened | -320° to 300° | 00000000 | 00000 |
24" × 48" | |||||
| 0.020" | -0.003" to 0.003" | Hardened | -320° to 300° | 00000000 | 00000 |
48" × 48" | |||||
| 0.020" | -0.003" to 0.003" | Hardened | -320° to 300° | 00000000 | 000000 |
48" × 72" | |||||
| 0.020" | -0.003" to 0.003" | Hardened | -320° to 300° | 000000000 | 000000 |