Compare over 20 aluminum alloys to find the right material for you—all with material certificates for traceability.
Multipurpose 6061 Aluminum Sheets and Bars
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
Extruded sheets and bars are formed by a die for close-tolerance widths, then cut to the lengths listed.
Aluminum that meets ASTM B209 or ASTM B221 complies with standards for materials.
Aluminum that meets an SAE AMS standard conforms to the material and process needs of the aerospace industry.
If you don’t see the sheet or bar size you need, please specify dimensions under additional sheet sizes or additional bar lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 35,000 psi
- Hardness: Brinell 95 (Soft)
- Temper: See table
- Fabrication: See table
- Specifications Met: See table
| Thick. | Thick. Tolerance | Fabrication | Temper | Heat Treatment | Temp. Range, °F | Specifications Met | Each | |
2" × 48" | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 1/8" | -0.012" to 0.012" | Extruded | T6511 | Hardened | -320° to 300° | ASTM B221, SAE AMS QQ-A-200/8 | 00000000 | 000000 |
4" × 48" | ||||||||
| 1 1/8" | -0.012" to 0.012" | Extruded | T6511 | Hardened | -320° to 300° | ASTM B221, SAE AMS QQ-A-200/8 | 00000000 | 000000 |
6" × 6" | ||||||||
| 1 1/8" | -0.012" to 0.012" | Extruded | T6511 | Hardened | -320° to 300° | ASTM B221, SAE AMS QQ-A-200/8 | 00000000 | 00000 |
6" × 12" | ||||||||
| 1 1/8" | -0.012" to 0.012" | Extruded | T6511 | Hardened | -320° to 300° | ASTM B221, SAE AMS QQ-A-200/8 | 00000000 | 00000 |
6" × 48" | ||||||||
| 1 1/8" | -0.012" to 0.012" | Extruded | T6511 | Hardened | -320° to 300° | ASTM B221, SAE AMS QQ-A-200/8 | 00000000 | 000000 |
8" × 8" | ||||||||
| 1 1/8" | -0.012" to 0.012" | Extruded | T6511 | Hardened | -320° to 300° | ASTM B221, SAE AMS QQ-A-200/8 | 00000000 | 00000 |
- Yield Strength: 35,000 psi
- Hardness: Brinell 95 (Soft)
- Temper: See table
- Fabrication: See table
- Specifications Met: See table
High-Strength 2024 Aluminum Sheets and Bars
While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.
Cold-drawn bars are formed by a die for close-tolerance widths, then cut to the lengths listed.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 47,000 psi
- Hardness: Brinell 120 (Medium)
- Fabrication: Cold Drawn
- Temper:
1/8" to 3/8" thick. bars: T4
All other sizes: T351 - Specifications Met: ASTM B211