In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Also known as Pressure Class 3000 fittings, these have the highest pressure rating of all the aluminum pipe fittings we offer.

Use these unthreaded flanges in low-pressure applications. Also known as Pressure Class 125 flanges.

Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

These caps are the fastest way to close off or access your water line. They have a bracket that snaps into any type of 2 1/2 size female fire hose threads. Tap on one of the pin lugs to remove quickly in an emergency.

Protect screw-together M12 connectors when not in use.

Protect Mil. Spec. connectors when not in use.

Separately control each device plugged into these strips—each outlet has its own power switch.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

Bring power to workstations that are not near a wall—these poles mount from the ceiling.

Seal tube and hose fittings to keep their straight threads protected from contaminants during fabrication and storage.

More durable than plastic plugs, these provide the most protection from abrasion and impact. Use them to eliminate sharp edges and create a finished look on metal fence and machine-guard posts. Drive them in place with a hammer for a secure fit.

Protect externally threaded components from contaminants during fabrication and storage.

Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Close off unused threaded holes.

Close off unused switches and outlets.

Lighter in weight than steel and brass grips, these aluminum grips are strong enough to secure cords in demanding wet environments.

Use these lightweight grips to secure cords entering knockouts at a 45° angle in wet, tight spaces while easing the stress from bending. Made of aluminum, they’re lighter in weight than steel and brass grips yet durable.

With an oval bushing hole, these lightweight grips secure flat building cable, such as Romex and Festoon cable, in wet areas. All offer strain relief to extend cable life.

These cord grips are lightweight yet durable.

Secure and seal electrical cords entering knockouts at a 45° angle.

Connect a single flat cable to a junction box.

These cord grips are lightweight yet durable. They have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the connection.

These grips meet Class III, Divisions 1 and 2 standards for use in hazardous locations.

These breather vents are rated NEMA 6 to withstand periodic submersion in water.

These sights have a glass window.