Material Material | Show |
|---|
|
Material Material | Hide |
|---|
Appearance Appearance |
|---|
|
|
System of Measurement System of Measurement |
|---|
|
Thickness Thickness |
|---|
|
|
|
Shape Shape |
|---|
 |  |
| Foil | Ring |
 |  |
| Round Tube | Sheet and Bar |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Aluminum Performance Properties Aluminum PerformanceProperties |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Certificate Certificate |
|---|
 | |
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Overall Width Overall Width |
|---|
|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Fabrication Fabrication |
|---|
|
Tolerance Rating Tolerance Rating |
|---|
|
Yield Strength Yield Strength |
|---|
|
Easy-to-Weld 5052 Aluminum Sheets and Bars
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
Bars are saw cut to the widths and lengths listed.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 23,000 psi
- Hardness: Brinell 60 (Soft)
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
| Thick. | Thick. Tolerance | Temperature Range, °F | 2" × 24" | 4" × 24" | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | 24” × 48” | 48" × 48" | |
| 0.032" | -0.003" to 0.003" | -300° to 300° | 000000000 | ||||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.062" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 0.090" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 0.100" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 000000000 | ||||||||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 000000000 | ||||||||||
| 1/4" | -0.015" to 0.015" | -300° to 300° | 000000000 | ||||||||||
| 3/8" | -0.02" to 0.02" | -300° to 300° | 000000000 | ||||||||||
| 1/2" | -0.027" to 0.027" | -300° to 300° | 000000000 |
- Yield Strength: 28,000 psi
- Hardness: Brinell 60 (Soft)
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
| Width | Temperature Range, °F | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Thick. (-0.007" to 0.007" Tolerance) | |||||||
|---|---|---|---|---|---|---|---|
| 1/2" | -300° to 300° | 000000 | |||||
| 3/4" | -300° to 300° | 000000 | |||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/4" | -300° to 300° | 000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
3/16" Thick. (-0.01" to 0.01" Tolerance) | |||||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
1/4" Thick. (-0.015" to 0.015" Tolerance) | |||||||
| 1/2" | -300° to 300° | 0000000 | |||||
| 3/4" | -300° to 300° | 0000000 | |||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/4" | -300° to 300° | 0000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
Polished Easy-to-Weld 5052 Aluminum Sheets and Bars
- Yield Strength: 20,000 psi
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish. The polished side is covered with a protective, peel-off film. Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
Brushed sheets and bars are polished to a #4 satin finish with grain lines running in one direction to mask fingerprints.
Mirror-like sheets and bars are polished to a #8 reflective finish and are free of grain lines.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Thick. | Thick. Tolerance | Temperature Range, °F | 2" × 24" | 4" × 24" | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | |
Brushed | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.032" | -0.003" to 0.003" | -300° to 300° | 00000000 | ||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.063" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.090" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.100" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | ||||||||
| 1/4" | -0.014" to 0.014" | -300° to 300° | 00000000 | ||||||||
Mirror-Like | |||||||||||
| 0.032" | -0.003" to 0.003" | -300° to 300° | 00000000 | ||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.063" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.090" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.100" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | ||||||||
| 1/4" | -0.014" to 0.014" | -300° to 300° | 00000000 | ||||||||
Easy-to-Weld 5052 Aluminum Tubes
- Yield Strength: 10,000 psi
- Hardness: Not Rated
- Temper: O
- Specifications Met: ASTM B210
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| OD | OD Tolerance | ID | ID Tolerance | Heat Treatment | Temperature Range, °F | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
0.035" Wall Thick. (-0.002" to 0.002" Tolerance) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/4" | -0.004" to 0.004" | 0.180" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.500" per ft. | 0000000 | |||
| 3/8" | -0.004" to 0.004" | 0.305" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 3/4" | -0.004" to 0.004" | 0.680" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.930" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
0.049" Wall Thick. (-0.003" to 0.003" Tolerance) | ||||||||||
| 1/4" | -0.004" to 0.004" | 0.152" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.500" per ft. | 0000000 | |||
| 3/8" | -0.004" to 0.004" | 0.277" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1/2" | -0.004" to 0.004" | 0.402" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 3/4" | -0.004" to 0.004" | 0.652" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.902" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
0.065" Wall Thick. (-0.004" to 0.004" Tolerance) | ||||||||||
| 1/2" | -0.004" to 0.004" | 0.370" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 5/8" | -0.004" to 0.004" | 0.495" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.870" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
Ring Shims
Precisely align, level, and adjust spacing on fasteners, shafts, and machinery with these shims.
For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like copper or aluminum, can be used as wear plates between components that rub together, preventing damage to equipment.
Aluminum shims are lightweight and nonmagnetic. They have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| ID | ID Tolerance | OD | OD Tolerance | Material | Min. Hardness | Pkg. Qty. | Pkg. | |
0.005" Thick. (-0.0005" to 0.0005" Tolerance) | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4" | 0" to 0.011" | 3/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
0.01" Thick. (-0.001" to 0.001" Tolerance) | ||||||||
| 1/4" | 0" to 0.011" | 3/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
0.016" Thick. (-0.0015" to 0.0015" Tolerance) | ||||||||
| 1/4" | 0" to 0.011" | 3/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 3/8" | 0" to 0.011" | 5/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 1/2" | 0" to 0.011" | 3/4" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 5/8" | 0" to 0.011" | 1" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 3/4" | 0" to 0.011" | 1 1/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 1" | 0" to 0.011" | 1 1/2" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
0.02" Thick. (-0.002" to 0.002" Tolerance) | ||||||||
| 1/4" | 0" to 0.011" | 3/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 3/8" | 0" to 0.011" | 5/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 1/2" | 0" to 0.011" | 3/4" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 5/8" | 0" to 0.011" | 1" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 3/4" | 0" to 0.011" | 1 1/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 1" | 0" to 0.011" | 1 1/2" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
0.032" Thick. (-0.0025" to 0.0025" Tolerance) | ||||||||
| 1/4" | 0" to 0.011" | 3/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 3/8" | 0" to 0.011" | 5/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 1/2" | 0" to 0.011" | 3/4" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 5/8" | 0" to 0.011" | 1" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 3/4" | 0" to 0.011" | 1 1/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 1" | 0" to 0.011" | 1 1/2" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
0.063" Thick. (-0.0035" to 0.0035" Tolerance) | ||||||||
| 1/4" | 0" to 0.011" | 3/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 3/8" | 0" to 0.011" | 5/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 1/2" | 0" to 0.011" | 3/4" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 5/8" | 0" to 0.011" | 1" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 3/4" | 0" to 0.011" | 1 1/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 1" | 0" to 0.011" | 1 1/2" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
1/8" Thick. (-0.007" to 0.007" Tolerance) | ||||||||
| 3/8" | 0" to 0.011" | 5/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 5 | 000000000 | 0000 |
| 1/2" | 0" to 0.011" | 3/4" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 5 | 000000000 | 00000 |
| 5/8" | 0" to 0.011" | 1" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 5 | 000000000 | 00000 |
| 3/4" | 0" to 0.011" | 1 1/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 5 | 000000000 | 00000 |
Aluminum Perforated Sheets
Aluminum is lightweight. These sheets have good corrosion resistance, weldability, and formability.
Grade 5052 aluminum is more corrosion resistant than Grade 3003, and is good for use in saltwater environments. It’s also harder and stronger for greater wear resistance. It’s often used in storage tanks, pressure vessels, and marine applications.
For technical drawings and 3-D models, click on a part number.
24" × 24" | 48" × 48" | |||||
|---|---|---|---|---|---|---|
| Hole Dia. | Open Area | Hole Center-to-Center | Each | Each | ||
5052 Aluminum Sheets—Staggered Holes | ||||||
0.032" Thick. (20 Gauge) | ||||||
| 0.0625" | 23% | 0.125" | 0000000 | 000000 | 000000 | 00 |
| 0.0625" | 30% | 0.109" | 0000000 | 00000 | 000000 | 00 |
| 0.125" | 40% | 0.188" | 0000000 | 00000 | 000000 | 00 |
| 0.25" | 58% | 0.313" | 0000000 | 00000 | 0000000 | 0000000 |
0.05" Thick. (16 Gauge) | ||||||
| 0.0625" | 23% | 0.125" | 0000000 | 00000 | 0000000 | 000000 |
| 0.0625" | 30% | 0.109" | 0000000 | 00000 | 0000000 | 000000 |
| 0.125" | 40% | 0.188" | 0000000 | 00000 | 000000 | 00 |
| 0.1875" | 51% | 0.25" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 58% | 0.313" | 0000000 | 00000 | 000000 | 00 |
0.063" Thick. (14 Gauge) | ||||||
| 0.125" | 40% | 0.188" | 0000000 | 00000 | 0000000 | 000000 |
| 0.1875" | 51% | 0.25" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 40% | 0.375" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 58% | 0.313" | 0000000 | 00000 | 0000000 | 000000 |
0.125" Thick. (8 Gauge) | ||||||
| 0.125" | 40% | 0.188" | 0000000 | 000000 | 0000000 | 000000 |
| 0.1875" | 51% | 0.25" | 0000000 | 000000 | 000000 | 00 |
| 0.25" | 40% | 0.375" | 0000000 | 000000 | 0000000 | 000000 |
| 0.25" | 58% | 0.313" | 0000000 | 000000 | 0000000 | 000000 |
Ultra-Corrosion-Resistant Aluminum Tubing
- Temperature Range: -450° to 400° F
- Bending Method: Tube Bender
- Compatible Tube Fittings: Flared
Commonly used in marine applications, this tubing contains magnesium for excellent corrosion resistance. It is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting.
For technical drawings and 3-D models, click on a part number.
| OD | Wall Thick. | ID | Max. Pressure | Temper Rating | Specifications Met | 1 ft. | 3 ft. | 6 ft. | |
For Use With Hydraulic Fluid and Salt Water | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3/16" | 0.028" | 0.132" | 1,600 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 3/16" | 0.035" | 0.118" | 2,000 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 1/4" | 0.028" | 0.194" | 1,200 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 1/4" | 0.035" | 0.18" | 1,500 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 5/16" | 0.035" | 0.243" | 1,200 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 3/8" | 0.028" | 0.319" | 820 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 3/8" | 0.035" | 0.305" | 1,000 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 3/8" | 0.049" | 0.277" | 1,400 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 1/2" | 0.02" | 0.46" | 440 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 1/2" | 0.035" | 0.43" | 770 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 1/2" | 0.049" | 0.402" | 1,000 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 5/8" | 0.035" | 0.555" | 620 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 5/8" | 0.049" | 0.527" | 870 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 3/4" | 0.028" | 0.694" | 410 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 3/4" | 0.035" | 0.68" | 510 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 3/4" | 0.049" | 0.652" | 720 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
Piano Hinges without Holes
Longer than other hinges, piano hinges run the entire length of doors and lids for strength and durability. These hinges have a standard clearance—when they are closed, the distance between the leaves is about the same as the pin diameter.
Aluminum hinges are about half the weight of low-carbon steel and brass. They have mild corrosion resistance.
Note: Prices are 15% to 20% lower when you buy 10 or more hinges of the same size.
For technical drawings and 3-D models, click on a part number.
Between
Hinge Leaves
Knuckle | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Material | Pin Material | Lg. | Dia. | Range of Motion | 1 ft. | 2 ft. | 3 ft. | 4 ft. | 5 ft. | 6 ft. | 7 ft. | 8 ft. | |
0.04" Leaf Thick. | |||||||||||||||
| 1 1/16" | 3/32" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.174" | 270° | 00000000 | ||||||||
| 1 1/4" | 3/32" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.174" | 270° | 00000000 | ||||||||
| 1 1/2" | 3/32" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.174" | 270° | 00000000 | ||||||||
| 2" | 3/32" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.174" | 270° | 00000000 | ||||||||
0.05" Leaf Thick. | |||||||||||||||
| 1" | 1/8" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.225" | 270° | 00000000 | ||||||||
| 1 1/4" | 1/8" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.225" | 270° | 00000000 | ||||||||
| 1 1/2" | 1/8" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.225" | 270° | 00000000 | ||||||||
| 2" | 1/8" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.225" | 270° | 00000000 | ||||||||
0.06" Leaf Thick. | |||||||||||||||
| 1 1/16" | 1/8" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.245" | 270° | 00000000 | ||||||||
| 1 1/4" | 1/8" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.245" | 270° | 00000000 | ||||||||
| 1 1/2" | 1/8" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.245" | 270° | 00000000 | ||||||||
| 1 3/4" | 1/8" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.245" | 270° | 00000000 | ||||||||
| 2" | 1/8" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.245" | 270° | 00000000 | ||||||||
| 2 1/2" | 1/8" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.245" | 270° | 00000000 | ||||||||
| 3" | 1/8" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.245" | 270° | 00000000 | ||||||||
| 4" | 1/8" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.245" | 270° | 00000000 | ||||||||
0.075" Leaf Thick. | |||||||||||||||
| 2" | 3/16" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.338" | 270° | 00000000 | ||||||||
| 2 1/2" | 3/16" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.338" | 270° | 00000000 | ||||||||
| 3" | 3/16" | 5052 Aluminum | 5052 Aluminum | 1/2" | 0.338" | 270° | 00000000 | ||||||||
0.09" Leaf Thick. | |||||||||||||||
| 2" | 1/4" | 5052 Aluminum | 5052 Aluminum | 1" | 0.430" | 270° | 00000000 | ||||||||
| 2 1/2" | 1/4" | 5052 Aluminum | 5052 Aluminum | 1" | 0.430" | 270° | 00000000 | ||||||||
| 3" | 1/4" | 5052 Aluminum | 5052 Aluminum | 1" | 0.430" | 270° | 00000000 | ||||||||
| 4" | 1/4" | 5052 Aluminum | 5052 Aluminum | 1" | 0.430" | 270° | 00000000 | ||||||||
0.12" Leaf Thick. | |||||||||||||||
| 2" | 1/4" | 5052 Aluminum | 5052 Aluminum | 2" | 0.490" | 270° | 00000000 | ||||||||
| 3" | 1/4" | 5052 Aluminum | 5052 Aluminum | 2" | 0.490" | 270° | 00000000 | ||||||||
| 3" | 3/8" | 5052 Aluminum | 5052 Aluminum | 2" | 0.615" | 270° | 00000000 | ||||||||
| 4" | 1/4" | 5052 Aluminum | 5052 Aluminum | 2" | 0.490" | 270° | 00000000 | ||||||||
| 4" | 3/8" | 5052 Aluminum | 5052 Aluminum | 2" | 0.615" | 270° | 00000000 | ||||||||
| 5" | 1/4" | 5052 Aluminum | 5052 Aluminum | 2" | 0.490" | 270° | 00000000 | ||||||||
Narrow-Profile Lift-Off Hinges without Holes
Hinge with 360°
Range of Motion
Also known as bullet hinges, these hinges are the right size for tight spaces and narrow frames. The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin. Hinges with a 360° range of motion have a small triangular surface to weld to the door frame. Hinges with a 270° range of motion have a body that welds directly to the door frame.
Aluminum hinges are about half the weight of low-carbon steel. They have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Hinges | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Door Leaf | Frame Leaf | Replacement Bushings | ||||||||||
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Range of Motion | Pin Dia. | Material | Pin Material | Each | Each | ||
Aluminum—Dull | ||||||||||||
| 13/16" | 5/16" | 13/16" | 5/16" | 5/16" | 360° | 13/64" | 5052 Aluminum | Stainless Steel | 000000 | 00000 | 00000000 | 00000 |
| 1" | 5/16" | 1" | 5/16" | 5/16" | 360° | 13/64" | 5052 Aluminum | Stainless Steel | 000000 | 0000 | 00000000 | 0000 |
| 1 3/16" | 3/8" | 1 3/16" | 3/8" | 3/8" | 360° | 15/64" | 5052 Aluminum | Stainless Steel | 000000 | 0000 | 00000000 | 0000 |
| 1 3/8" | 7/16" | 1 3/8" | 7/16" | 7/16" | 360° | 15/64" | 5052 Aluminum | Stainless Steel | 000000 | 0000 | 00000000 | 0000 |
| 1 9/16" | 1/2" | 1 9/16" | 1/2" | 1/2" | 360° | 5/16" | 5052 Aluminum | Stainless Steel | 000000 | 0000 | 00000000 | 0000 |
| 1 31/32" | 5/8" | 1 31/32" | 5/8" | 5/8" | 360° | 25/64" | 5052 Aluminum | Stainless Steel | 000000 | 00000 | 0000000 | 0000 |
| 2 21/32" | 11/16" | 2 21/32" | 11/16" | 11/16" | 360° | 1/2" | 5052 Aluminum | Stainless Steel | 000000 | 00000 | 00000000 | 0000 |
| 2 31/32" | 13/16" | 2 31/32" | 13/16" | 13/16" | 360° | 1/2" | 5052 Aluminum | Stainless Steel | 000000 | 00000 | 00000000 | 0000 |
| 3 9/16" | 13/16" | 3 9/16" | 13/16" | 13/16" | 360° | 1/2" | 5052 Aluminum | Stainless Steel | 000000 | 00000 | 00000000 | 0000 |
| 3 15/16" | 15/16" | 3 15/16" | 15/16" | 15/16" | 360° | 5/8" | 5052 Aluminum | Stainless Steel | 0000000 | 00000 | 00000000 | 0000 |
Lift-Off Hinges without Holes
The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin. Capacity is based on two hinges per door. To choose a door mounting location, stand on the pull side of the door—use a right-side hinge if the hinge is on the right or a left-side hinge if it’s on the left.
Aluminum hinges are about half the weight of low-carbon steel. They have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Dia. | Material | Pin Material | Each | ||
Left Side Door Mounting Location | |||||||||||||
Aluminum—Dull | |||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | Not Rated | 1/8" | 5052 Aluminum | 303 Stainless Steel | 000000000 | 00000 |
| 1 | 2" | 27/32" | 2" | 27/32" | 1 11/16" | 0.080" | 270° | Not Rated | 3/16" | 5052 Aluminum | 304 Stainless Steel | 00000000 | 0000 |
Right Side Door Mounting Location | |||||||||||||
Aluminum—Dull | |||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | Not Rated | 1/8" | 5052 Aluminum | 303 Stainless Steel | 000000000 | 0000 |
| 1 | 2" | 27/32" | 2" | 27/32" | 1 11/16" | 0.080" | 270° | Not Rated | 3/16" | 5052 Aluminum | 304 Stainless Steel | 00000000 | 0000 |
Self-Closing Spring Hinges without Holes
Springs in these hinges automatically swing doors and gates closed behind you. All hinges have a nonremovable pin to deter tampering.
Aluminum hinges are lightweight and corrosion resistant in wet environments.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Pin Dia. | Pin Material | Each | |
5052 Aluminum—Dull | ||||||||||
| 2 1/2" | 17/32" | 2 1/2" | 17/32" | 1 1/16" | 0.040" | 270° | 3/32" | 304 Stainless Steel | 000000000 | 000000 |
| 3 1/2" | 3/4" | 3 1/2" | 3/4" | 1 1/2" | 0.040" | 270° | 3/32" | 304 Stainless Steel | 000000000 | 0000 |
| 5" | 1" | 5" | 1" | 2" | 0.050" | 270° | 1/8" | 304 Stainless Steel | 000000000 | 00000 |