The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

These sheets are clad in 1230 aluminum for an added layer of corrosion resistance.

Harder than our other 304 stainless steel, these thin sheets offer better wear resistance for use as a wrap, liner, or cover.

Able to withstand repeated stress and wear, 301 stainless steel has the strength required for applications such as springs and fasteners.

Because these thin sheets are harder than our other 316 stainless steel, they offer better wear resistance. Use them as a wrap, liner, or cover.

As the most formable of all the PH-grade materials, 17-7 PH stainless steel is widely used in the aerospace industry for intricate parts. When hardened, this material strengthens to make it resist distortion.

440A stainless steel resists damage from impact and abrasion. It's often used for cutlery and valve components.

4130 alloy steel has a low carbon content for good weldability. It's often used for gears, fasteners, and structural applications.

These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties.

These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties.

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

Even in temperatures up to 2000° F, Alloy X nickel sheets offer good strength and weldability, along with excellent oxidation resistance. They're often used for components in gas turbine engines and furnaces. This material is equivalent to Inconel HX and Hastelloy X.

Able to withstand greater heat than molybdenum and other high-temperature metal, this chemically pure tungsten is ultra dense for use in high-heat parts in vacuum furnaces, heat shields, and radiation shields.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

Use these resin-free fabrics to reinforce or repair existing composites as well as create new composites. Mold custom-shaped composite parts by layering your choice of fabric with an epoxy.

Cut this stock into custom shapes to fit your application.

The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Precisely align, level, and adjust spacing on fasteners and shafts with these shims.

Slide these shims under the screw head to shorten the shoulder length.

Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.

To keep electrical connections intact, these washers retain wires so they won't slip out from under your screw head.

Choose these washers for their adherence to strict military standards for material and construction.

Gauges are 12” long and have finished ends marked with thickness.

Use these feeler gauge assortments to check gaps, alignment, and narrow slots.