0.187" Aluminum Sheets | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Tolerance Rating Tolerance Rating

Standard

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

DFARS Specialty Metals
Compliant

	Hardness Rating Hardness Rating

Soft

Medium

	Hardness Hardness

	Temper Rating Temper Rating

	Layer Thickness Layer Thickness

0.003"

	Heat Treatment Heat Treatment

Annealed (Softened)

	Yield Strength Yield Strength

20,000 to 99,999 psi

Not Rated

	Heat Treatable Heat Treatable

Yes

	Elongation Elongation

View catalog pages (28)

Forward

How can we improve?

82 Products

Multipurpose 304 Stainless Steel

From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

304 Stainless Steel Strips

Yield Strength: 30,000 psi
Hardness: Rockwell B85 (Medium)
Heat Treatment: Annealed (Softened)
Heat Treatable: No
Specifications Met: ASTM A240

1" × 36"
Thick.	Thick. Tolerance	Fabrication		Each
0.187"	-0.008" to 0.008"	Cold Worked	0000000	000000
1 1/2" × 36"
0.187"	-0.008" to 0.008"	Cold Worked	00000000	00000
2" × 36"
0.187"	-0.008" to 0.008"	Cold Worked	0000000	00000
3" × 36"
0.187"	-0.008" to 0.008"	Cold Worked	00000000	000000
4" × 18"
0.187"	-0.008" to 0.008"	Cold Worked	00000000	00000
4" × 36"
0.187"	-0.008" to 0.008"	Cold Worked	0000000	000000
5" × 18"
0.187"	-0.008" to 0.008"	Cold Worked	00000000	00000
5" × 36"
0.187"	-0.008" to 0.008"	Cold Worked	00000000	000000
6" × 18"
0.187"	-0.008" to 0.008"	Cold Worked	00000000	000000
6" × 36"
0.187"	-0.008" to 0.008"	Cold Worked	00000000	000000

Polished Multipurpose 304 Stainless Steel

Polished to either a brushed or mirror-like finish, this material is widely used to fabricate decorative enclosures and industrial workstations. The sheets, strips, bars, and adhesive-back foil are covered with a protective peel-off film. 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.

Brushed #3 finish has grain lines running in one direction to mask fingerprints. Mirror-like #8 finish is reflective and free of grain lines.

Foil, sheets, and strips are polished on one side.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Strips

Brushed #3

Mirror-Like #8

Yield Strength: 30,000 psi
Hardness: See table
Heat Treatment: Annealed (Softened)
Heat Treatable: No
Specifications Met: See table

1" × 24" (Brushed #3)
Thick.	Thick. Tolerance	Fabrication	Hardness	Specifications Met	Flatness Tolerance		Each
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	00000000	000000
1" × 36" (Mirror-Like #8)
0.187"	-0.007" to 0.007"	Cold Drawn	Rockwell B80 (Medium)	ASTM A240	Not Rated	00000000	00000
2" × 12" (Brushed #3)
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
2" × 24" (Brushed #3)
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	000000
2" × 36" (Mirror-Like #8)
0.187"	-0.007" to 0.007"	Cold Drawn	Rockwell B80 (Medium)	ASTM A240	Not Rated	00000000	000000
3" × 12" (Brushed #3)
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
3" × 24" (Brushed #3)
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	000000
4" × 12" (Brushed #3)
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	00000
4" × 24" (Brushed #3)
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	000000
4" × 36" (Mirror-Like #8)
0.187"	-0.007" to 0.007"	Cold Drawn	Rockwell B80 (Medium)	ASTM A240	Not Rated	00000000	000000
5" × 12" (Brushed #3)
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	000000
5" × 24" (Brushed #3)
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	000000
6" × 24" (Brushed #3)
0.187"	-0.007" to 0.007"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	1/2"	0000000	000000
6" × 36" (Mirror-Like #8)
0.187"	-0.007" to 0.007"	Cold Drawn	Rockwell B80 (Medium)	ASTM A240	Not Rated	00000000	000000

Corrosion-Resistant 316 Stainless Steel

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications. It maintains its corrosion resistance up to the maximum temperature.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Strips

Yield Strength: 30,000 psi
Hardness: Rockwell B95 (Medium)
Heat Treatment: Annealed (Softened)
Heat Treatable: No
Specifications Met: ASTM A240

316 Stainless Steel
Thick.	Thick. Tolerance	Fabrication	Max. Temp., °F		1” × 24”	2" × 12"	2" × 24"	3" × 12"	3" × 24"	4" × 12"	4" × 24"	5" × 12"	5" × 24"	6" × 24"
0.187"	-0.01" to 0.01"	Cold Worked	1500°	000000	000000	000000	000000	000000	0000000	000000	0000000	000000	0000000	0000000

Polished Corrosion-Resistant 316 Stainless Steel

Brushed

Mirror-Like

Yield Strength: 30,000 psi
Hardness: Rockwell B95 (Medium)
Heat Treatment: Annealed (Softened)
Heat Treatable: No
Specifications Met: ASTM A240

One side of these sheets is polished to either a brushed or mirror-like finish, then covered in a protective peel-off film. The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications. It maintains its corrosion resistance in temperatures up to 1500° F.

Brushed sheets are polished to a #4 finish, which is often called a satin finish. It has fine grain lines running in one direction to mask fingerprints.

Mirror-like sheets are polished to a #8 finish, which is reflective and free of grain lines.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Brushed #4
Thick.	Thick. Tolerance	Fabrication	Mechanical Finish		6” × 6”	12” × 12”	12” × 24”	24” × 24”
0.187"	-0.01" to 0.01"	Cold Worked	Polished	0000000	0000000	0000000	0000000	0000000
Mirror-Like #8
0.187"	-0.01" to 0.01"	Cold Worked	Polished	0000000	000000	000000	000000	000000

Easy-to-Form Wear-Resistant 1095 Spring Steel Sheets

Yield Strength: 60,000 psi
Hardness: Rockwell B90 (Medium)
Heat Treatable: Yes
Max. Hardness After Heat Treatment: Not Rated

These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties. 1095 spring steel has a higher carbon content than 1075 spring steel for better wear resistance. It is often fabricated into parts that will be used under continual stress, such as spring clips and washers.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

3" × 3"
Thick.	Thick. Tolerance	Heat Treatment	Flatness Tolerance		Each
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	000000
8" × 12"
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
8" × 24"
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
15" × 48"
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
24" × 24"
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	000000
24" × 48"
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	000000

Easy-to-Form 1075 Spring Steel Sheets

Yield Strength: 50,000 psi
Hardness: Rockwell B90 (Medium)
Heat Treatable: Yes
Max. Hardness After Heat Treatment: Rockwell C64
Specifications Met: ASTM A684

These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties. 1075 spring steel is easier to bend than 1095, but it has less bounce-back after heat treating. It is often used for springs and shims.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

				8" × 12"		8" × 24"		15" × 48"
Thick.	Thick. Tolerance	Heat Treatment	Flatness Tolerance		Each		Each		Each
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000	0000000	0000000	0000000	0000000

Easy-To-Form Multipurpose 1050 Spring Steel Sheets

Yield Strength: 60,000 psi
Hardness: Rockwell B92
Heat Treatable: Yes
Maximum Hardness After Heat Treatment: Rockwell C58
Specifications Met: ASTM A682

Containing more carbon than low-carbon steel—but less than 1095 spring steel—1050 spring steel is easily formed into parts such as washers, brackets, and springs before being hardened for use. It resists stress, so it won’t snap when formed or twisted. Because it has a lower carbon content than 1095 spring steel, it’s not as wear resistant.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

8" × 12"
Thickness	Thickness Tolerance	Heat Treatment	Flatness Tolerance		Each
0.187"	-0.003" to 0.003"	Annealed (Softened)	Not Rated	00000000	0000000
8" × 24"
0.187"	-0.003" to 0.003"	Annealed (Softened)	Not Rated	00000000	000000
15" × 48"
0.187"	-0.003" to 0.003"	Annealed (Softened)	Not Rated	00000000	000000

Brushed Ultra-Formable 260 Brass Sheets

Yield Strength: 40,000 psi
Hardness: Rockwell B45 (Soft)
Temper: H01 (1/4 Hard)
Heat Treatable: No
Specifications Met: ASTM B134, ASTM B36

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints. The brushed side comes covered with a protective peel-off film. The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Thick.	Thick. Tolerance	Mechanical Finish	Flatness Tolerance		12" × 12"	12" × 24"	24" × 24"
0.187"	-0.01" to 0.01"	Polished	0.125"	00000000	0000000	0000000	000000000

Mirror-Like Ultra-Formable 260 Brass Sheets

Yield Strength: 40,000 psi
Hardness: Rockwell B45 (Soft)
Temper: H01 (1/4 Hard)
Heat Treatable: No
Specifications Met: ASTM B134, ASTM B36

Polished on one side to a reflective, mirror-like finish, these sheets come covered with a protective peel-off film. The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Thick.	Thick. Tolerance	Mechanical Finish	Flatness Tolerance		12" × 12"	12" × 24"	24" × 24"
0.187"	-0.01" to 0.01"	Polished	0.125"	00000000	0000000	0000000	000000000

Brushed Weldable Marine-Grade 464 Brass Sheets

Yield Strength: 58,000 psi
Hardness: Rockwell B80 (Medium)
Temper: H01 (1/4 Hard)
Heat Treatable: No
Specifications Met: ASTM B171

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints. The brushed side comes covered with a protective peel-off film. A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

				12" × 12"		12" × 24"		24" × 24"
Thick.	Thick. Tolerance Range	Mechanical Finish	Flatness Tolerance		Each		Each		Each
0.187"	-0.01" to 0.01"	Polished	1/2" per 24"	0000000	0000000	0000000	0000000	0000000	0000000

Mirror-Like Weldable Marine-Grade 464 Brass Sheets

Yield Strength: 58,000 psi
Hardness: Rockwell B80 (Medium)
Temper: H01 (1/4 Hard)
Heat Treatable: No
Specifications Met: ASTM B171

Polished on one side to a reflective, mirror-like finish, these sheets come covered with a protective peel-off film. A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

				12" × 12"		12" × 24"		24" × 24"
Thick.	Thick. Tolerance Range	Mechanical Finish	Flatness Tolerance		Each		Each		Each
0.187"	-0.01" to 0.01"	Polished	1/2" per 24"	0000000	0000000	0000000	0000000	0000000	0000000

Multipurpose 110 Copper Sheets and Bars

Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Softened (Annealed) Temper Sheets

Yield Strength: See table
Hardness: See table
Temper Rating: Softened (Annealed)
Heat Treatable: No
Specifications Met:
0.021" to 0.062" thick. sheets: ASTM B152, ASTM B370
All other sizes: ASTM B152

2" × 24"
Thick.	Thick. Tolerance Range	Yield Strength, psi	Hardness		Each
0.187"	-0.007" to 0.007"	Not Rated	Rockwell F40 (Soft)	00000000	0000000
4" × 24"
0.187"	-0.007" to 0.007"	Not Rated	Rockwell F40 (Soft)	00000000	000000
6" × 6"
0.187"	-0.007" to 0.007"	Not Rated	Rockwell F40 (Soft)	00000000	00000
6" × 24"
0.187"	-0.007" to 0.007"	Not Rated	Rockwell F40 (Soft)	00000000	000000
12" × 12"
0.187"	-0.007" to 0.007"	Not Rated	Rockwell F40 (Soft)	0000000	000000
12" × 24"
0.187"	-0.007" to 0.007"	Not Rated	Rockwell F40 (Soft)	0000000	000000
12" × 48"
0.187"	-0.007" to 0.007"	Not Rated	Rockwell F40 (Soft)	00000000	000000
24" × 24"
0.187"	-0.007" to 0.007"	Not Rated	Rockwell F40 (Soft)	00000000	000000
36" × 48"
0.187"	-0.007" to 0.007"	Not Rated	Rockwell F40 (Soft)	0000000	00000000
36" × 96"
0.187"	-0.007" to 0.007"	Not Rated	Rockwell F40 (Soft)	0000000	00000000

Hardened Temper Sheets

Yield Strength:
M20, H00, H01 Temper sheets: Not Rated
H02 Temper sheets: 37,000 psi
Hardness:
M20, H00, H01 Temper sheets: Rockwell F40 (Soft)
H02 Temper sheets: Rockwell F83 (Soft)
Temper:
See Table
Heat Treatable: No
Specifications Met:
0.016" thick. sheets: ASTM B152, ASTM B370
All other sizes: ASTM B152

2" × 36"
Thick.	Thick. Tolerance Range	Temper	Temper Rating		Each
0.187"	-0.008" to 0.008"	H02	1/2 Hard	00000000	0000000
4" × 36"
0.187"	-0.008" to 0.008"	H02	1/2 Hard	00000000	000000
6" × 6"
0.187"	-0.008" to 0.008"	H02	1/2 Hard	00000000	00000
6" × 36"
0.187"	-0.008" to 0.008"	H02	1/2 Hard	00000000	000000
12" × 12"
0.187"	-0.008" to 0.008"	H02	1/2 Hard	00000000	000000
12" × 24"
0.187"	-0.008" to 0.008"	H02	1/2 Hard	00000000	000000
12" × 48"
0.187"	-0.008" to 0.008"	H02	1/2 Hard	00000000	000000
24" × 24"
0.187"	-0.008" to 0.008"	H02	1/2 Hard	00000000	000000
36" × 48"
0.187"	-0.008" to 0.008"	H02	1/2 Hard	00000000	00000000

Mirror-Like Multipurpose 110 Copper Sheets

Yield Strength: 36,000 psi
Hardness: Rockwell B40 (Soft)
Temper: See Table
Heat Treatable: No
Specifications Met: ASTM B152

Polished on one side to a reflective, mirror-like finish, these sheets come covered with a protective peel-off film. Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

12" × 12"
Thick.	Thick. Tolerance Range	Temper	Temper Rating	Mechanical Finish	Flatness Tolerance		Each
0.187"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	0000000
12" × 24"
0.187"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
24" × 24"
0.187"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	00000000

Brushed Multipurpose 110 Copper Sheets

Yield Strength: 36,000 psi
Hardness: Rockwell B40 (Soft)
Temper: See Table
Heat Treatable: No
Specifications Met: ASTM B152

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints. The brushed side comes covered with a protective peel-off film. Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

12" × 12"
Thick.	Thick. Tolerance Range	Temper	Temper Rating	Mechanical Finish	Flatness Tolerance		Each
0.187"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	0000000
12" × 24"
0.187"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	000000
24" × 24"
0.187"	-0.01" to 0.01"	H00 to H02	1/8 Hard to 1/2 Hard	Polished	0.125"	0000000	00000000

Easy-to-Form 220 Bronze

Yield Strength: 33,000 psi
Hardness: Rockwell B55 (Soft)
Temper:
0.187" thick. sheets: H01 (1/4 Hard)
All other sizes: H02 (1/2 Hard)
Heat Treatable: No
Specifications Met: ASTM B36

Offering excellent formability, 220 bronze is known for its ability to withstand outdoor exposure. Commonly called commercial bronze, it's uses include weatherstripping, trim, and decorative hardware.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Thick.	Thick. Tolerance		2" × 24"	4" × 24"	6" × 6"	6" × 12"	6" × 24"	12" × 12"	12" × 24"	12" × 48"	24" × 24"	24" × 48"
0.187"	-0.008" to 0.008"	000000000	0000000	0000000	0000000	0000000	0000000	0000000	0000000	0000000	0000000	000000000

Ultra-Strength 718 Nickel Sheets

Yield Strength: 70,000 psi
Hardness: Rockwell B95 (Medium)
Temper Rating: Softened (Annealed)
Specifications Met: ASTM B670, SAE AMS5596

Often used for cryogenic tanks and fasteners, 718 nickel will maintain its high strength in temperatures from -300° to 1200° F, even after long-term exposure. It can be further strengthened by heat treating. This material is comparable to Inconel 718.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Thick.	Thick. Tolerance	Heat Treatable	Max. Hardness After Heat Treatment		6" × 6"	12” × 12”	12" × 24"
0.187"	-0.01" to 0.035"	Yes	Rockwell C40	000000	0000000	0000000	000000000

Ultra-High-Temperature Alloy X Nickel Sheets

Yield Strength: 54,000 psi
Hardness: Rockwell B90 (Medium)
Temper Rating: Softened (Annealed)
Specifications Met: ASTM B435, SAE AMS5536

Even in temperatures up to 2000° F, Alloy X nickel offers good strength and weldability, along with excellent oxidation resistance. It's often used for components in gas turbine engines and furnaces. This material is equivalent to Inconel HX and Hastelloy X.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Thick.	Thick. Tolerance		6" × 6"	12" × 12"	12" × 24"
0.187"	-0.01" to 0.035"	00000000	0000000	0000000	000000000

Peel-Away Layered Shim Stock

Cut this shim stock it into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need. To make the layers easier to pull apart, gently heat the shim to soften the adhesive.

For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like copper or aluminum, can be used as wear plates between components that rub together, preventing damage to equipment.

Aluminum shim stock is lightweight and nonmagnetic. It has good corrosion resistance.

1100 Aluminum

							24" × 24"
Thick.	Thick. Tolerance	No. of Layers	Min. Hardness	Temper Rating	Specifications Met	Magnetic Properties		Each
0.003" Layer Thick. (-0.0003" to 0.0003" Tolerance)
0.187"	-0.003" to 0.018"	62	Not Rated	Full Hard	SAE AMS-DTL-22499	Nonmagnetic	0000000	0000000

Cutoff and Grooving Carbide Inserts

Neutral

Right Hand

Combine a holder and carbide insert to perform cutoff and grooving tasks on a lathe.

Neutral inserts have a 0° lead angle for cutting solid workpieces.

Right-hand inserts have an 8° lead angle for cutting hollow workpieces such as pipe and tubing.

C2 carbide is abrasion resistant and less likely to chip or crack than C5 carbide when cutting aluminum, brass, and bronze.

C5 carbide holds up better than C2 carbide when making cuts in steel, stainless steel, and cast iron.

Coated inserts last longer and can be run at faster speeds than uncoated inserts.

For technical drawings and 3-D models, click on a part number.

Uncoated C2 Carbide
Thick.	Groove Wd.	Lg.	Radius	For Use On		Each
Neutral
0.187"	0.187"	0.525"	0.008"	Aluminum, Brass, Bronze	0000000	000000
Right Hand
0.187"	0.187"	0.525"	0.008"	Aluminum, Brass, Bronze	0000000	00000
Uncoated C5 Carbide
Neutral
0.187"	0.187"	0.525"	0.008"	Steel	0000000	00000
Right Hand
0.187"	0.187"	0.525"	0.008"	Steel	0000000	00000
Titanium Nitride (TiN)-Coated C5 Carbide
Neutral
0.187"	0.187"	0.525"	0.008"	Cast Iron, Stainless Steel, Steel	0000000	00000
Right Hand
0.187"	0.187"	0.525"	0.008"	Cast Iron, Stainless Steel, Steel	0000000	00000