Compare over 20 aluminum alloys to find the right material for you—all with material certificates for traceability.
About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
Multipurpose 6061 Aluminum Sheets and Bars
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
Cold-rolled foil, sheets, and bars are cut from large pieces to the widths and lengths listed, so the edges may not be parallel.
Extruded sheets and bars are formed by a die for close-tolerance widths, then cut to the lengths listed.
Aluminum that meets ASTM B209 or ASTM B221 complies with standards for materials.
Aluminum that meets an SAE AMS standard conforms to the material and process needs of the aerospace industry.
If you don’t see the sheet or bar size you need, please specify dimensions under additional sheet sizes or additional bar lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 35,000 psi
- Hardness: Brinell 95 (Soft)
- Temper: See table
- Fabrication: See table
- Specifications Met: See table
| Thick. | Thick. Tolerance | Fabrication | Temper | Heat Treatment | Temp. Range, °F | Specifications Met | Each | |
2" × 24" | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 000000 |
2" × 48" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 00000 |
4" × 24" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 00000 |
4" × 48" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 00000 |
6" × 6" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 00000 |
6" × 12" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 00000 |
6" × 24" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 00000 |
6" × 48" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 00000 |
6" × 72" | ||||||||
| 0.190" | -0.009" to 0.009" | Hot Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 00000 |
8" × 8" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 00000 |
12" × 12" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 00000000 | 00000 |
12" × 24" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 00000000 | 00000 |
12" × 36" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 00000 |
12" × 48" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 000000 |
12" × 72" | ||||||||
| 0.190" | -0.009" to 0.009" | Hot Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 000000 |
18" × 18" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 00000 |
24" × 24" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 00000000 | 000000 |
24" × 48" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 00000000 | 000000 |
24" × 72" | ||||||||
| 0.190" | -0.009" to 0.009" | Hot Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 000000 |
36" × 36" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 00000000 | 000000 |
48" × 48" | ||||||||
| 0.190" | -0.009" to 0.009" | Cold Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 00000000 | 000000 |
48" × 72" | ||||||||
| 0.190" | -0.009" to 0.009" | Hot Rolled | T6 | Hardened | -320° to 210° | ASTM B209, SAE AMS4027 | 000000000 | 000000 |
- Yield Strength: 35,000 psi
- Hardness: Brinell 95 (Soft)
- Temper:
Cold Rolled sheets: T6
Extruded sheets: T6511 - Fabrication: See table
- Specifications Met:
Cold Rolled sheets: ASTM B209, SAE AMS4027
Extruded sheets: ASTM B221, SAE AMS QQ-A-200/8
To Order: Please specify length and width in increments of 0.25" within the range listed.
Anodized Multipurpose 6061 Aluminum Sheets and Bars
- Yield Strength: 35,000 psi
- Hardness: Not Rated
- Temper: See table
- Fabrication: Extruded
- Specifications Met: See table
An anodized coating bonds to the aluminum surface to improve wear and corrosion resistance. The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
Gray finish is also known as hard anodized. The surface is so hard, it’s comparable to case-hardened steel, which makes these sheets and bars more difficult to machine than uncoated 6061 aluminum.
For technical drawings and 3-D models, click on a part number.
Polished Multipurpose 6061 Aluminum Sheets and Bars
- Yield Strength: 35,000 psi
- Hardness: Brinell 95 (Soft)
- Temper: 1/4" and 3/8" thick.: T651
All other sizes: T6 - Fabrication: 1/4" and 3/8" thick.: Extruded
All other sizes: Cold Rolled - Specifications Met: ASTM B209
One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish. The polished side is covered with a protective peel-off film. The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
Brushed sheets and bars are polished to a #4 satin finish with grain lines running in one direction to mask fingerprints.
Mirror-like sheets and bars are polished to a #8 reflective finish and are free of grain lines.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Easy-to-Weld 5052 Aluminum Sheets and Bars
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 23,000 psi
- Hardness: Brinell 60 (Soft)
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
| Thick. | Thick. Tolerance | Temperature Range, °F | Each | |
2" × 24" | ||||
|---|---|---|---|---|
| 0.190" | -0.011" to 0.011" | -300° to 300° | 00000000 | 000000 |
4" × 24" | ||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 000000000 | 00000 |
6" × 6" | ||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 000000000 | 00000 |
6" × 12" | ||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 00000000 | 00000 |
6" × 24" | ||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 00000000 | 00000 |
12" × 12" | ||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 000000000 | 00000 |
12" × 24" | ||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 00000000 | 00000 |
12" × 48" | ||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 000000000 | 000000 |
24" × 24" | ||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 00000000 | 000000 |
24" × 36" | ||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 000000000 | 000000 |
24" × 48" | ||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 00000000 | 000000 |
24" × 72" | ||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 000000000 | 000000 |
48" × 48" | ||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 00000000 | 000000 |
Polished Easy-to-Weld 5052 Aluminum Sheets and Bars
- Yield Strength: 20,000 psi
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish. The polished side is covered with a protective, peel-off film. Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
Brushed sheets and bars are polished to a #4 satin finish with grain lines running in one direction to mask fingerprints.
Mirror-like sheets and bars are polished to a #8 reflective finish and are free of grain lines.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Corrosion-Resistant 3000 Series Aluminum Sheets and Bars
3000 series aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, garage doors, and general sheet metal work.
For technical drawings and 3-D models, click on a part number.
- Yield Strength: 16,500 psi
- Hardness: Brinell 40 (Soft)
- Temper: H14 (1/2 Hard)
- Fabrication: Cold Worked
- Specifications Met: ASTM B209
| Thick. | Thick. Tolerance | Temperature Range, °F | Each | |
6" × 24" | ||||
|---|---|---|---|---|
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | 000000 |
12" × 12" | ||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | 00000 |
12" × 24" | ||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | 00000 |
24" × 24" | ||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | 000000 |
24" × 36" | ||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | 000000 |
36" × 48" | ||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | 000000 |
36" × 96" | ||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | 000000 |
Hardened Easy-to-Form Pure 1100 Aluminum Sheets
These sheets are tempered to a 1/2-hard or full-hard state to make them over twice as strong as standard 1100 aluminum. Because 1100 aluminum is 99% pure, it offers superior corrosion resistance and electrical conductivity.
Temper H14 sheets are used for heat exchangers, chemical equipment, and decorative trim.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 15,000 psi
- Hardness: Brinell 30 (Soft)
- Temper: H14 (1/2 Hard)
- Fabrication: Cold Worked
- Specifications Met: ASTM B209
Easy-to-Form Marine-Grade 5086 Aluminum Sheets and Bars
- Yield Strength: 28,000 psi
- Hardness: Not Rated
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Worked
- Specifications Met: ASTM B209
5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
High-Strength 2024 Aluminum Sheets and Bars
While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.
Cold-rolled sheets are cut from large pieces to the widths and lengths listed, so the edges may not be parallel.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 41,000 psi
- Hardness: Brinell 120 (Medium)
- Temper:
0.020" to 0.190" thick. sheets: T3
All other sizes: T351 - Fabrication: Cold Rolled
- Specifications Met: ASTM B209
| Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | Each | |
6" × 6" | |||||
|---|---|---|---|---|---|
| 0.190" | -0.007" to 0.007" | Hardened | -320° to 300° | 000000000 | 000000 |
8" × 8" | |||||
| 0.190" | -0.007" to 0.007" | Hardened | -320° to 300° | 000000000 | 00000 |
12" × 12" | |||||
| 0.190" | -0.007" to 0.007" | Hardened | -320° to 300° | 00000000 | 00000 |
12" × 24" | |||||
| 0.190" | -0.007" to 0.007" | Hardened | -320° to 300° | 00000000 | 000000 |
18" × 18" | |||||
| 0.190" | -0.007" to 0.007" | Hardened | -320° to 300° | 000000000 | 000000 |
24" × 24" | |||||
| 0.190" | -0.007" to 0.007" | Hardened | -320° to 300° | 00000000 | 000000 |
24" × 48" | |||||
| 0.190" | -0.007" to 0.007" | Hardened | -320° to 300° | 00000000 | 000000 |
48" × 48" | |||||
| 0.190" | -0.007" to 0.007" | Hardened | -320° to 300° | 00000000 | 00000000 |
48" × 72" | |||||
| 0.190" | -0.007" to 0.007" | Hardened | -320° to 300° | 000000000 | 00000000 |
High-Strength 7075 Aluminum Sheets and Bars
Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.
Hot-rolled, cold-rolled, and cast sheets are cut from large pieces to the widths and lengths listed, so the edges may not be parallel.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 61,000 psi
- Hardness: Brinell 150 (Medium)
- Temper:
0.032" thick. to 0.190" thick.: T6
1/4" thick. and thicker.: T651 - Fabrication: See Table
- Specifications Met: ASTM B209, SAE AMS-QQ-A-250/12
| Thick. | Thick. Tolerance | Fabrication | Heat Treatment | Temperature Range, °F | Each | |
6" × 6" | ||||||
|---|---|---|---|---|---|---|
| 0.190" | -0.007" to 0.007" | Cast | Hardened | -320° to 210° | 00000000 | 000000 |
6" × 12" | ||||||
| 0.190" | -0.007" to 0.007" | Cast | Hardened | -320° to 210° | 00000000 | 00000 |
6" × 24" | ||||||
| 0.190" | -0.007" to 0.007" | Cast | Hardened | -320° to 210° | 00000000 | 000000 |
8" × 8" | ||||||
| 0.190" | -0.007" to 0.007" | Cast | Hardened | -320° to 210° | 00000000 | 00000 |
12" × 12" | ||||||
| 0.190" | -0.007" to 0.007" | Cast | Hardened | -320° to 210° | 0000000 | 000000 |
12" × 24" | ||||||
| 0.190" | -0.007" to 0.007" | Cast | Hardened | -320° to 210° | 0000000 | 000000 |
18" × 18" | ||||||
| 0.190" | -0.007" to 0.007" | Cast | Hardened | -320° to 210° | 00000000 | 000000 |
24" × 24" | ||||||
| 0.190" | -0.007" to 0.007" | Cast | Hardened | -320° to 210° | 0000000 | 000000 |
24" × 48" | ||||||
| 0.190" | -0.007" to 0.007" | Cast | Hardened | -320° to 210° | 0000000 | 000000 |
48" × 48" | ||||||
| 0.190" | -0.007" to 0.007" | Cast | Hardened | -320° to 210° | 0000000 | 00000000 |
Easy-to-Weld 4130 Alloy Steel Sheets and Bars
- Yield Strength: 50,000 psi
- Hardness: Rockwell B85 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C60
- Specifications Met: SAE AMS6350, SAE AMS6351
4130 alloy steel has a low carbon content for good weldability. It's often used for gears, fasteners, and structural applications.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Thick. | Thick. Tolerance | Heat Treatment | Each | |
6" × 12" | ||||
|---|---|---|---|---|
| 0.19" | -0.009" to 0.009" | Annealed (Softened) | 0000000 | 000000 |
6" × 36" | ||||
| 0.19" | -0.009" to 0.009" | Annealed (Softened) | 0000000 | 00000 |
12" × 12" | ||||
| 0.19" | -0.009" to 0.009" | Annealed (Softened) | 0000000 | 00000 |
12" × 24" | ||||
| 0.19" | -0.009" to 0.009" | Annealed (Softened) | 0000000 | 00000 |
24" × 24" | ||||
| 0.19" | -0.009" to 0.009" | Annealed (Softened) | 0000000 | 000000 |
36" × 36" | ||||
| 0.19" | -0.009" to 0.009" | Annealed (Softened) | 0000000 | 000000 |