When compared to standard 304 stainless steel, this material can be machined faster with less wear on cutting tools. It's also called Prodec and Project 70+.

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel.

Precision ground on the top and bottom to a tight tolerance.

These sheets and bars are precision ground either on all six sides or just on the top and bottom.

The honeycomb design provides a higher strength-to-weight ratio than solid sheets.

Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

Designed for use as a production injection mold and blow mold, tk Ultra 7 is extremely strong with a hard surface and excellent thermal conductivity. It’s comparable to QC-10 aluminum.

2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.

Made of 5083 aluminum, these cast tool and jig plates are more corrosion resistant and respond better to anodizing than MIC6. This material is comparable to Alca 5 and ATP 5.

Because the thickness is oversized, you can finish these bars to your exact requirements.

The thickness is oversized for finishing to your exact requirements.

Sometimes called flat stock, these bars have a thickness and width that are precision ground to a tight tolerance.

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It’s often used for jigs and fixtures.

Sulfur is added to these sheets, which helps them produce smaller chips than other low-carbon steel sheets when they’re machined. Smaller chips mean less clogging and more coolant flow while you cut.

A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.

The thickness and width are oversized to allow for finishing.

Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

The thickness, length, and width are oversized for finishing to your exact requirements.

Also known as flat stock, these bars have an oversized thickness, length, and width for finishing to your exact requirements.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

This material suppresses static charges to prevent dust from building up.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

Add stiffness to composite sandwiches without adding a lot of weight.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

Polyester resists swelling in wet environments.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Stronger and more durable than High-Strength Multipurpose Neoprene, this rubber can handle high-tension applications such as belting.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Rated for temperatures down to -415° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.

Know at a glance when a tool is missing from a toolbox with this dual-color foam.