With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel.

Precision ground on the top and bottom to a tight tolerance.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

This material has a minimum of 99.5% pure lead content. Applications for lead include radiation shields, sound barriers, and vibration dampers.

This Alloy 22 nickel resists highly corrosive environments better than similar nickel alloys, including 625 and C-276.

These precision-ground sheets and bars are held to a tight thickness tolerance.

These W1 bars have lower amounts of alloy elements than other tool steels for excellent machinability.

These bars are also known as flat stock.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Often fabricated into signs, packaging, and light duty housings, polystyrene is easy to thermoform.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Manufactured from Rulon PTFE, a PTFE material that's modified with epoxy-coated fiber for a super-slippery, impact-resistant surface that resists wear.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.

FDA compliant, these sheets and strips are approved for direct contact with food.

Create a barrier against fire and smoke. These sheets and strips meet FAR 25.856 and UL 94 V-0 for flame retardance.

These natural rubber sheets and strips will stretch up to six times their length. Use them in dynamic applications, such as vibration isolators and shock mounts.

With one layer of polyester fabric for every 1/16” of thickness, these sheets and strips maintain their size and shape under heavy compression better than the nonreinforced abrasion-resistant SBR.

This rubber has better shock absorbing qualities and will provide longer life than Standard Multipurpose Neoprene.

Stronger and more durable than High-Strength Multipurpose Neoprene, this rubber can handle high-tension applications such as belting.

This neoprene dissipates static electrical charge, which can damage or cause equipment to malfunction.

With one layer of nylon fabric for every 1/16” of thickness, these sheets have the strength to be used as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.

With greater strength than standard Weather-Resistant EPDM, these sheets and strips provide better shock-absorbing qualities and longer life.

These EPDM sheets and strips meet transportation industry standards for flammability, smoke, and toxicity. Use them as weather-resistant seals on windows and doors, pads to reduce vibration between panels, and exterior trim.

A cross between plastic and rubber, Santoprene offers good resistance to weather and chemicals while retaining its stretchability.

Temperatures as low as –70° F have no effect on these fluorosilicone sheets and strips.

Resistant to the chemicals that are commonly used to clean and sterilize food-processing equipment, these sheets and strips are made from FDA-listed materials for use with food and beverage.

With equal chemical resistance to Viton® fluoroelastomer, Aflas provides a stronger, steam-tolerant alternative.

These sheets and strips offer better shock-absorbing qualities and longer life than standard Oil-Resistant Buna-N.

Made from FDA-compliant materials for use with food and beverage, these sheets and strips won’t degrade from animal and vegetable oils.

Because these sheets and strips are made from peroxide-cured Buna-N rubber, they have better heat resistance than standard Oil-Resistant Buna-N rubber sheets and strips.

To maintain their size and shape under heavy compression, these sheets have one layer of nylon fabric for every 1/16” of thickness. Use them as flange gaskets and diaphragm packing.

With a coating that reduces static electricity , these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment.

Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

These Garolite CE sheets and bars are often fabricated into parts where high strength is not required.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Frequently called electrical-grade Garolite, this Garolite G-9 is strong, electrically insulating, and arc resistant in dry environments.

Rated for temperatures down to -415° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

SG-200 fiberglass withstands temperatures up to 410° F—higher than any of our other fiberglass raw materials. It’s also stronger than FRP fiberglass and easy to machine.

Choose this carbon fiber for a high strength-to-weight ratio and stiffness against force from all directions.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

These thick shims are scored to make size adjustments easy—break off the excess shim for a custom fit around fasteners or corners. Use them to align cabinets, doors, and windows, or for other rough leveling.

Stretch these magnetic strips over corners and irregular surfaces.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.

Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.

Protect sensitive equipment from heat buildup with this silicone foam. These sheets are commonly used to fill gaps and damp vibration in computers, battery installations, and pipe assemblies.

EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

Often used for impact pads, gaskets, and enclosure seals, these polyurethane foam sheets and strips absorb shock better than other types of resilient foam. The harder the impact, the stiffer the foam becomes, increasing its ability to absorb shock.

Also known as Ethafoam.

Made of Buna-N foam, these sheets offer excellent oil resistance. They also resist fuel and solvents.

A blend of aramid and fiberglass, this fabric resists mildew and abrasion. It is self-extinguishing and won't melt, so it's often used for insulation applications.

Also known as Macor, these glass-mica ceramic sheets and bars withstand temperatures up to 1470° F.

Made from a blend of cork and rubber, this material is commonly used for low-pressure applications.

This neoprene gasket material is reinforced with a nylon insert to prevent it from losing shape while under pressure up to 1,000 psi.

For use in high-pressure applications up to 3,000 psi.

With a maximum pressure of 55 psi, this cork gasket material is commonly used in low-pressure applications.

Made of American Bureau of Shipping Fire Safe approved graphite material, these sheets withstand temperatures up to 650° F and pressure up to 2,000 psi.

Able to withstand pressure up to 10,000 psi, this is our highest pressure-rated gasket material. It handles temperatures up to 850° F.

In addition to handling temperatures up to 1800° F, this vermiculite material resists most acids, alkalies, and detergents.

Made of FDA-listed material for use with food and beverage.

A fiberglass filler in this PTFE gasket material provides strength and prevents it from thinning out when compressed.

Made of FDA-listed material for use with food and beverage.

Made of FDA-listed material for use with food and beverage.

Made from a blend of aramid fiber and Buna-N rubber.