When compared to standard 304 stainless steel, this material can be machined faster with less wear on cutting tools. It's also called Prodec and Project 70+.

This material has tighter tolerances than standard 303 stainless steel.

This material machines faster with less wear on cutting tools than standard 316 stainless steel. It's also called Prodec and Project 70+.

The width and thickness are oversized for finishing to your exact requirements.

More corrosion resistant than 316L stainless steel, AL-6XN stainless steel won’t crack or break down when exposed to harsh chemicals like chlorides.

These sheets and bars are precision ground either on all six sides or just on the top and bottom.

As the strongest multipurpose aluminum we offer, 6013 aluminum has the same good corrosion resistance, weldability, and machinability as 6061 with increased strength. 6013 is often fabricated into high-stress machine parts.

Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

Designed for use as a production injection mold and blow mold, tk Ultra 7 is extremely strong with a hard surface and excellent thermal conductivity.

MIC6 is cast from a high-strength 7000-series aluminum, then stress relieved to maintain dimensional stability during high-speed machining.

Stronger than low-carbon steel with equally good machinability, 1045 carbon steel is widely used for bolts, studs, and shafts.

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

Because the thickness is oversized, you can finish these bars to your exact requirements.

Ductile cast iron is strong, resilient, and able to handle repeated stress without breaking.

A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.

An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.

In addition to being conductive, these 17510 beryllium copper bars are non-sparking and non-magnetic, so they’re used in mines and oil rigs, as well as for navigational tools.

The thickness, length, and width are oversized for finishing to your exact requirements.

Made of recycled UHMW plastic, these sheets and bars are an economical, environmentally friendly alternative to standard UHMW while still offering the same low-friction surface that prevents sticking and binding.

Compared to our standard UHMW polyethylene, these sheets and bars hold up better to scuffs and scrapes in high-speed, high-precision, and high-impact applications—such as conveyor equipment, chute liners, and machine guards. Also known as Tivar HPV.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.

Polycarbonate maintains good impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Use Noryl PPO for electrical insulating applications where moisture is a concern. It remains dimensionally stable over time, even when temperatures fluctuate.

Widely used to make parts that require autoclaving, polysulfone is a hard, rigid material that’s easy to machine and thermoform. It maintains its physical properties when heated, even when exposed to steam.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Stronger and more durable than High-Strength Multipurpose Neoprene, this rubber can handle high-tension applications such as belting.

Buna-N rubber resists fuel oil, hydraulic oil, ethylene glycol, and grease.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Rated for temperatures down to -415° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

In addition to being lighter in weight than silicone foam, this polyimide foam also remains soft and conformable across a broader temperature range.

These dual-material foam sheets and strips have ultra-soft polyurethane foam on one side and chemical-resistant polyethylene foam on the other. They are widely used in packaging applications to absorb shock and damp vibration.

Commonly called memory foam and Confor, these sheets and strips have the best cushioning qualities of all the foam we offer.

Also known as Ethafoam.

Protect electronic components from electrostatic shocks and chemicals while safeguarding them from bumps and drops during shipping and storing.

Similar to a sponge, this open-cell foam absorbs and holds up to 30 times its weight in liquid.

Made of high-strength calcium silicate, these durable sheets withstand high temperatures and are often used in power-generating applications.

The most common of our flexible high-temperature sheets, these are used to insulate furnaces.

Insulate high-vacuum furnaces and other low-oxygen vacuum enclosures with these rigid sheets. They withstand higher temperatures when used in a vacuum and can be machined through sawing or drilling.

These sheets resist the absorption of water, air, and gas and are widely used in cold-storage and packaging applications.

Insulate rectangular ductwork.

Stiffen composite sandwiches while also keeping them lightweight.

The foil facing reflects heat. Use these sheets to quiet noisy areas and line machine enclosures. They’re made of humidity-resistant polyurethane foam.

This insulation meets ASTM E162 for flame retardance and ASTM E662 for smoke output. Use to quiet noisy areas and line machine enclosures. Sheets are made of polyimide foam.

The best sound absorbers of all our rigid sheets, use to quiet noisy areas in your facility. They're peaked on one side for more sound-absorbing area than flat sheets. Made of melamine, they have an acrylic resin finish that resists dust and dirt and wipes clean.

Furnished with two hangers for easy mounting around your facility, these sheets quiet noisy areas. Made of melamine foam, they are peaked on both sides for good sound absorption in large open spaces.